Norm RUINED His Brand New $50,000 Speed Boat! 

Have you looked into the x2 worm I told you about

If you rip them engines apart clean them out real good But new rod and mine bearings in it, They will be fine You definitely don't need new engines just go through them and clean them out have it done couple grand each and game on

I agree with the other guy take the motors out send them to a machine shop and get rebuild kits probably can get both of them done for around $1000. As far as getting the boat out probably will need a small motorized water pump to pump water out to get the boat off the trailer and re connect the trailer to a truck or tractor. When taking the bot out the water use Darrel’s tractor with a scoop of rocks or sand in the bucket and utilize the new winch to get it completely on the trailer at the new boat ramp. Should be able to do a trial run on ayos boat which is also salvageable especially if they want to use it as a floating cabin. Which i feel they could take the lower units off and cover the holes lower unit holes plywood and fiberglass that boat would need a ballast in the rear to make up for the weight and a bilge pump connected to a battery with a solar panel trickle charger connected to it so that it stays dry as possible.

Antiwhite advertising promoted by youtube

I want norms hat. And if yiu ever want to come to a race with our team we would love to have you. And ty for your service

That’s a fact. No question, don’t buy new motors!

I agree my bellows went bad an my boat sunk completely and I got it flushed out in a weekend

You can 100% get those engines going again. There’s videos about these people that restore a big boat with massive Diesel engines and it was submersed for days or maybe a week or so before the insurance company could retrieve it. Anyhow, the engines still worked and they had salt water in them, lots of it too. Y’all need to get those engines running again no doubt

Came here to say this those motors can be repaired no problem.

@@garrettschenker566 how long did it take to sink and what bellows lol

I’ll let him know!

Do it

That would be an amazing collaboration

you aint ever bought a boat motor have ya

@@testickles8834 yes but those are built car motors soooo....

@@KyleStjohn-lu6ew you are still talking out your a$$. To start with the grammar, it's engines not motors. Back to the point, Go ahead and go price a couple 512 CI supercharged engines for that kind of boat. that thin ass fiberglass isn't the reason they are 100k (for starters) voats.

They don’t need to be rebuilt. Drain oil pull plugs spin motors over to get water out rebuild carbs and should be good to go

@@daleskelton8963 let me know how that goes. Even without the super fine mud that WILL get in the bearings, you just dunked a engine in the water, then let it sit in the Florida sun for months. The rust alone will destroy that thing in minutes. And that's a big IF the lifters haven't seized yet.

I think Norm is purposely sabotaging your pond so you will just give him your house and pond 🤣🤣

😩😩😂😂

Norm been in Germany for a hot minute

@@FishingWithYakPak well dang! Glad you’ve been making content!

He would have that out in 10 minutes along with the other boats

@@danielcreech2932 could you imagine Heavy D bringing in the new Blackhawk to lift it out of the pond? 🤣🤣🤣🚁🚤

Raining here too 🥲

💚

In the works now. I got the run around for a bit but we’ve submitted it and are waiting for approval 🙏🏼