Тёмный

Norton Nemesis V8 rebuild - Episode 10 

Allen Millyard
Подписаться 269 тыс.
Просмотров 132 тыс.
50% 1

In this video I will be fitting the new cylinder liners, main bearings, and installing the crankshaft.
Note: All parts will be thoroughly cleaned before final assembly, so any debris , swarf dust of dirt seen under macro cinimatography in this video will be cleaned off before the final assembly..
The Norton Nemeses is a pre production prototype that was made in the late 90's with claims of a 200+mph top speed from its 1500cc fuel injected V8 engine.
As far as I'm aware, this is the only bike that has survived but if any of you know of other bikes please leave a comment. This bike is owned by the National Motorcycle Museum in Birmingham UK has been on display as a non running exhibit for many years.
I have already worked on the bike last year getting the engine to run after a few rudimentary checks, new oil and batteries for series 12 of Henry Cole's "The Motorbike Show" where Henry rode it for a few miles up to around 50 mph, but it wasn't running very well and was leaking a lot of oil and coolant.
Episodes of "The Motorbike show" can be seen on itvx player on line and some shorter edits are available on Henrys RU-vid channel.
Over the coming months I will be stripping the bike to sort out a few issues with the V8 engine and hopefully make it run and ride how it was intended 25 years ago.

Авто/Мото

Опубликовано:

 

5 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 868   
@billygingerguitars2791
@billygingerguitars2791 Месяц назад
A million times better than watching England play football
@alanr2609
@alanr2609 Месяц назад
a very welcome antidote indeed
@soylentgreen326
@soylentgreen326 Месяц назад
🎯❤
@GTRider69
@GTRider69 Месяц назад
"Play" is a bit rich!
@susanboucher2116
@susanboucher2116 Месяц назад
Yes, he knows what he’s doing.
@davidelliott5843
@davidelliott5843 Месяц назад
Have they blown it yet?
@Deepb1u
@Deepb1u Месяц назад
Allen made a mistake but still included it in his video. That level of honesty is a good bench mark for all of us who both teach, and know we can still learn.
@ninja1150
@ninja1150 Месяц назад
Agreed, fair play to him for including that mistake. Hats off to him
@daniels.2720
@daniels.2720 Месяц назад
+ we all learn from our hopefully minor mistakes ! Cheers to Allen.
@manjacovus5342
@manjacovus5342 Месяц назад
My revered English lecturer at uni used to say, We grow by experience, and here is living proof of it.
@jamesrindley6215
@jamesrindley6215 Месяц назад
I was just going to say the same thing. In the age of all kinds of fakes, honesty really stands out. Was just recently watching wristwatch revival rebuild the same watch 3 or 4 times because he'd made a mistake and wouldn't be satisfied until it was perfect. A lesson for us all.
@PAULWICKS-xy6kt
@PAULWICKS-xy6kt 29 дней назад
and what a mistake.! how could Mr A.Millyard do that.!,? …oh the modesty of the man.
@timelapsetown
@timelapsetown Месяц назад
Opened up the laptop, Alan posted this vid 12 seconds ago. So that was just perfect.
@michaelcurley7801
@michaelcurley7801 Месяц назад
Yes, I'm really pleased with that
@Plexxarn
@Plexxarn Месяц назад
​Standby for hedgehogs in you garden..
@patreich3637
@patreich3637 Месяц назад
34. minutes.
@thomasmeadows256
@thomasmeadows256 Месяц назад
@user-eg7uw9ls4o
@user-eg7uw9ls4o Месяц назад
@@michaelcurley7801you beat me to it
@anixie
@anixie Месяц назад
No CNC machine anywhere close, just a good old fashioned lathe and highly experienced machinists hands, love it
@WorksopGimp
@WorksopGimp Месяц назад
Hand files crank cases
@julianpritchard2558
@julianpritchard2558 Месяц назад
@@WorksopGimpcuts crank cases with a hacksaw!!
@4418CARLOU
@4418CARLOU Месяц назад
Why would he have any use for a CNC?
@chriswild2458
@chriswild2458 Месяц назад
I bet the liners were produced on a c n c lathe
@gdijkema
@gdijkema 29 дней назад
@@chriswild2458 Came to say that
@clivewilliams3661
@clivewilliams3661 Месяц назад
Not only are Allen's builds 'just perfect' but so is his production and camera work that makes it a joy to watch.
@user-zv8dl4ru8c
@user-zv8dl4ru8c 29 дней назад
Даешь ежикам номинацию на Оскар!))
@COMA69BAND
@COMA69BAND Месяц назад
just sat down with a cuppa and a muffin, perfect timing....no annoying music, just the clock ticking and Alan's dulcet tones for company..... absolutely perfect.
@ianwalton9109
@ianwalton9109 Месяц назад
I was driving home from work the other night, a car had stopped in the middle of the road (country lane) i stopped to see what was up, 2 young lads trying to move a Hedgehog off the road, i picked it up and placed him on the other side of the hedgerow, but hats off to the youngsters for not just running over it, think they are a couple of good-uns
@AllenMillyard
@AllenMillyard Месяц назад
That’s really nice of them
@Honkawsuzyamal
@Honkawsuzyamal Месяц назад
At one time I had a tiny baby hedgehog in my front garden where a road ran past. I couldn't see the parent or any other hedgehogs around so I put him safely around the back where the whole Street is sealed off.
@LS-uv9gg
@LS-uv9gg Месяц назад
Hearing an English Craftsman say: "...to my horror, I..." has got to be one of the very best mental pictures of elegantly understated, self deprecating humour on the planet.
@slewisedwards
@slewisedwards Месяц назад
My wife doesn't know the difference between a spanner and a hammer. She knows motorcycles have two wheels and that's about it. BUT - she asked what I was watching, and has now watched all of these herself at least twice. She loves them.
@AllenMillyard
@AllenMillyard Месяц назад
That’s brilliant 🙂
@kingfishstacy
@kingfishstacy Месяц назад
Lucky you wish my wife would catch interest in something of mine. 😅
@kingfishstacy
@kingfishstacy Месяц назад
Lucky you wish my wife would have some kind of interest in something I'm passionate about. Or maybe not because it would end up I'm doing it all wrong. 😅
@andystokes8702
@andystokes8702 Месяц назад
Not knowing the difference between a spanner and a hammer is not that important, every tool eventually gets used as a hammer.
@mryorkshire3623
@mryorkshire3623 Месяц назад
She might be secretly watching it to pick up some cup cake baking tips from Mrs. M.
@SteveBernard42
@SteveBernard42 Месяц назад
Watching Allen work is a privilege, genius at work.
@ducatobeing
@ducatobeing Месяц назад
Had we mere mortals have attempted this task, the crank being the wrong way round (quickly remedied) would have been the least of the issues. Like any true expert, Alan makes what are actually difficult tasks seem effortlessly simple. The fruits of great skill and experience. Everything about this was a joy to behold. Thank you Alan.
@henrydorsetcase
@henrydorsetcase Месяц назад
I love the whole "I'll just spin that up in the lathe and give it a tickle up till it fits just perfect"
@garfield2279
@garfield2279 29 дней назад
If he wanted to, Allen could have edited that bit out, and we would have been none the wiser just goes to show even the best of us makes mistakes, credit to him for leaving it in.
@paramarky
@paramarky Месяц назад
I'm struggling to think of another man on this planet, who could have done this restoration and rebuild as well as AM.
@RG-gk4yi
@RG-gk4yi Месяц назад
The only ones that come to mind are the Binky boys and My Mechanics. I think if all 4 of them collaborated on a project my brain would explode
@henrydorsetcase
@henrydorsetcase Месяц назад
@@RG-gk4yi The issue would be waiting for Binky...... we have been waiting over a year for Ep 39. Just saying.
@gasdive
@gasdive Месяц назад
There's probably some guys in or from F1, and some of the old guys who designed the GSX-R, maybe Hiroshi Fujiwara. After all, much of this bike is a pretty straight rip off of his design.
@stephenscholes4758
@stephenscholes4758 29 дней назад
Don't be so ridiculous...why does Allen's fans have to resort to this type of zealotry?
@grebermuncie3904
@grebermuncie3904 27 дней назад
@@stephenscholes4758 Agreed. There are hundreds, if not thousands, of people around the globe with the skills to be doing this same task.
@aldntn
@aldntn Месяц назад
Allen is human but readily admits it. Beautifully done.
@gasdive
@gasdive Месяц назад
Sign of a master. Just perfect.
@ChopperCindy
@ChopperCindy 29 дней назад
I have reconditioned, machined and rebuilt engines for a living for 50 years. I am sure I could not possibly watch anyone else doing this work. It is such a departure from the modern TikTok rubbish with captions ,portrait video and music blaring that I find it so refreshing that I could watch it all day. Thank you!
@richardmoorhouse8030
@richardmoorhouse8030 Месяц назад
The best 22 minutes of the weekend are over….. Are England out yet? Mind you….. who bloody cares when there is a new A.M. film to watch!
@generalmassive1907
@generalmassive1907 Месяц назад
I don't know what's more therapeutic, watching alan work his magic or listening to the clock tick in his garrage 😂
@Rugbyman269
@Rugbyman269 29 дней назад
As an ex watch repairer , Allan's clock is very slightly out of beat , the tick tock should be even , I know , I'm a pedant , but it's just " not " perfect , sorry Allen 😀
@fransb8543
@fransb8543 29 дней назад
No matter how stressful my day has been, watching Allen meticulously working his magic is as soothing as anything.
@keithfarrell3370
@keithfarrell3370 Месяц назад
"I just skim this ring on my lathe". Just shows the skill and professionalism Allen possess. Great vid as usual. Thank you
@Malcolm-nj8ky
@Malcolm-nj8ky Месяц назад
Love the clock ticking in the background (no music 👏)
@Birky_41
@Birky_41 Месяц назад
Anyone else like the video seconds in without even watching it through? I love these uploads
@fidelcatsro6948
@fidelcatsro6948 Месяц назад
of course!
@stevenrowley9481
@stevenrowley9481 Месяц назад
Allen, you do realise that you will have to get another project ready for when you have completed the Nemesis! For many of us, we can't go without our weekly 'Millyard' fix! It's the perfect antidote to the stresses ofthe week!
@jamesrindley6215
@jamesrindley6215 Месяц назад
I was just thinking, perhaps Allen will take 2 GSX750 engines and make his own version of the Nemesis, without all the crazy nonsense like needing to take the forks out to change the front tyre of course!
@allanthacker6072
@allanthacker6072 Месяц назад
From what I’ve heard Allen’s next project is the complete disassembly and reassembly of a top of the range Rolex!
@davidcatanach2620
@davidcatanach2620 Месяц назад
Somewhat encouraging to see even the GOAT makes the odd boo-boo.
@BaffledApe
@BaffledApe Месяц назад
Not only a real old school biker, but a real old school toolmaker and mechanical artisan. Respect!
@therealtony
@therealtony Месяц назад
From one machinst to another: your machining skills are top notch!
@lesleysmith5623
@lesleysmith5623 Месяц назад
Allen, that was bloody marvellous. Slip set brought me right back to my apprenticeship about 50 years ago.
@johnchapman3601
@johnchapman3601 Месяц назад
When he opened the box of slip gauges my mind jumped back 55yrs to my time as an engine fitter in Chatham Dockyard 😊
@dbmail545
@dbmail545 Месяц назад
I am gobsmacked that your were able to machine those sealing rings without distorting them. Even more surprised that the crank could go in wrong and that you would show it.
@glennwoods2462
@glennwoods2462 Месяц назад
That's why I watch Mr Millyard... he's that skilled...👍
@johnmccarthy5132
@johnmccarthy5132 29 дней назад
Closing in.on it Allen! I can't imagine how appreciative the museum will be to have that Norton run without the prospect of it turning into a grenade!
@jetskifisher7825
@jetskifisher7825 Месяц назад
Great attention to detail Alan as ever, from a 50 year engineer using all the machines and hand tools you use, brings back great memories, keep up the astounding work.
@andrewprettyquick2070
@andrewprettyquick2070 Месяц назад
adding more soul to an already soul-adorned machine. priceless engineering observation
@zawzawaung6789
@zawzawaung6789 Месяц назад
I've learned a lot by watching your videos. I usually work on old airhead BMWs, which have their weird quirks. You've taught me to persevere on fiddly bits, and not give up. You've taught me to distrust new-fangled tools, and to go with older tried & true ones. I don't know what your "day job" for MOD entails, but I bet they know they're employing a national treasure.
@jessematilda
@jessematilda Месяц назад
Sheer poetry. Calm, precise, accurate. Love it.
@ggmtv1394
@ggmtv1394 29 дней назад
As I watched the measuring and machining of the liners, I was overwhelmed by the calm skill given the tolerances and was beginning to think that Alan had supernatural powers - then the crankshaft went in the wrong way round and showed he's human - human but amazing - endless patience and precise progress. This was an excellent episode, The hedgehogs put on a good show too.
@user-cn5ft5wl5n
@user-cn5ft5wl5n 27 дней назад
You sir are a living legend. Absolutely love how you always have home cooked/baking and wild animals in your videos . Takes a man to admit to his mistakes, hat off to to you sir
@okgo8315
@okgo8315 29 дней назад
Absolute genius..... who would've thought some sticky tape would be strong enough to fix the cyl.liners in the lathe??? I call that Rustic Engineering 😂😂.... brilliant..... thankyou Allen yet again✌️🇬🇧
@markspeller5722
@markspeller5722 Месяц назад
You just know when Allen finishes this, it's Going to be smoother than a cashmere cod piece.
@owensbama1923
@owensbama1923 Месяц назад
These videos always seem to fly by. As usual I can't wait to see the next one.
@AllenMillyard
@AllenMillyard Месяц назад
Ep11 next sat 6pm
@michaelwatson6166
@michaelwatson6166 Месяц назад
Alan, if you were on the original tream, we would all be riding V8's great work, thank you.
@fidelcatsro6948
@fidelcatsro6948 Месяц назад
true..even im inspired to add 4 more cylinder to my 1200 bandit.. but of course we all know its not going to happen
@tonymarkey6525
@tonymarkey6525 Месяц назад
I’m glad to see that Mr Millyard is in fact fallible after all! A Great recovery was, of course, the outcome!😊😊
@chrisbowman4487
@chrisbowman4487 Месяц назад
This man keeps my attention for the full video The man’s a genius every thing Allen does is do to perfection
@RedJam65
@RedJam65 Месяц назад
This is Allen in his version of a study, wotking away with the clock ticking in the background, very relaxing and inspiring to watch.
@ianmurray3820
@ianmurray3820 29 дней назад
Don’t beat yourself up Allen !! I mean who hasn’t put a Norton V8 crank in the wrong way around.!???😁💪🏻💪🏻💪🏻
@rdaystrom4540
@rdaystrom4540 Месяц назад
Never would've thought about machining the cylinder sleeve gaskets like that. Allen is an amazing machinist, fun to watch, always knows what to do, and documents it on great videos.
@pinger201046
@pinger201046 Месяц назад
So pleased to see that I'm not the only one who fits things arse about! Thanks Allen, I'm picking up a lot of useful info.
@douglasanderson153
@douglasanderson153 Месяц назад
Beautiful work Allen. I didn’t know Norton built a V8 motorcycle. That tiny engine is a work of art.
@colinbremner9030
@colinbremner9030 Месяц назад
Thank you so much for this series Allen I just love watching pretty much anything you release.
@1t_wasnt_me
@1t_wasnt_me 28 дней назад
It makes me envious of anyone who grew up around this man, as my memories of older mates guidance tuition consisted more of, "when you're putting it back together, remember that the wee bit there, goes in first, then that other wee bit goes in after it.....and remember to use a wee bit vaseline!!!"
@MM_in_Havasu
@MM_in_Havasu Месяц назад
Allen, you make this look so easy, and the way you managed to hand-fit the liners without much in the way of measurement is mute testimony to your fabrication skills! An absolute pleasure to watch these episodes on the restoration process of this V8 Norton motorcycle's powerplant. Cheers to you & yours, and do enjoy the rest of your day!
@richardsprojects
@richardsprojects Месяц назад
You were just checking we were paying attention when the crank was in wrong way round .As always , loving the content
@joseywales3789
@joseywales3789 Месяц назад
Definitely got a glimpse of Sir Allen's Swiss Army Knife, Scissors ✂️😁👍... If I'd seen the Barbeque too... I'd be in heaven 😂🤣
@charlesphillips8635
@charlesphillips8635 Месяц назад
So Mr Millyard you are human after all! Fitting the crank the wrong way round indeed😊
@toucheturtle3840
@toucheturtle3840 Месяц назад
Allen’s attention to detail is incredible. Always a joy watching his videos.
@tim2muntu954
@tim2muntu954 Месяц назад
It's not what Allen does but the way he does it (and video's it). It's positively therapeutic; making the whole world inclined to watch his videos his apprentice is just a side effect. Only a very lucky few ever got to learn from masters like this in the past.
@wretchedexcess1654
@wretchedexcess1654 Месяц назад
Showing your humanity tells so much more about your integrity... ...not that there was ever a question about it!
@SGTDuckButter
@SGTDuckButter Месяц назад
I love watching him work. Charlie Weaver has got to be 60 years old and still works perfectly. My grandpa had one at his farm and I played with it in the 60’s.
@robinlarge1630
@robinlarge1630 Месяц назад
Not into bikes really, but I could listen to this bloke talk about engineering all day!!!👏🏻🇬🇧👍🏻
@mutters40
@mutters40 Месяц назад
A masterclass in engine rebuilding. Thanks Allen.
@randylucas2458
@randylucas2458 Месяц назад
I love watching you work on motorcycles it is my favorite thing on the internet. I just finished building a 117 cubic inch big bore Harley-Davidson motor with a 4.125" bore and a 4.375" stroke
@steveparkes1
@steveparkes1 Месяц назад
The engine whisperer! Wonderful to watch, thank's Allen.
@doccops
@doccops 17 дней назад
Oops, easy mistake we've all done similar. Your videos are a delight Allen - thanks for taking the time to do them, and to edit them so well.
@CharliePower-mx7tj
@CharliePower-mx7tj Месяц назад
Cannot wait to hear it spring into life again, it will purr 👌😊
@grahamsmith2022
@grahamsmith2022 Месяц назад
Alan fitted the crankshaft the wrong way round deliberately just to make us mere mortals feel better the next time we fit brake pads back to front. 😂.
@ianr7023
@ianr7023 Месяц назад
This is very addictive and therapeutic. Can't wait for the next episode!
@tomtruesdale6901
@tomtruesdale6901 Месяц назад
Having never seen bore liners installed this was very interesting to me. Thank you for sharing with us.
@richardraby6266
@richardraby6266 Месяц назад
So glad that you left the footage in with you installing the crank the wrong way round! This gives comfort to us less talented fellows who FAR more often do similar things. Richard
@michielderuyter6011
@michielderuyter6011 Месяц назад
Like to watch this everytime. Don’t stop please. These are really too short episodes😅. Tnx for making us a part of this. ❤
@AllenMillyard
@AllenMillyard Месяц назад
22 mins is manageable for me to shoot, edit and voice over in a week
@michielderuyter6011
@michielderuyter6011 Месяц назад
I understand but it is so calming to watch. Carry on please. Gr. From the Netherlands✌️
@gonegliding2966
@gonegliding2966 Месяц назад
Another 22 minutes that just evaporated. Just perfect!
@MrACOUSTICPETE
@MrACOUSTICPETE Месяц назад
Thanks Allen for another of my favourite bedtime stories . Looking forward to the happy ending !!😴
@alisonmoxon7519
@alisonmoxon7519 Месяц назад
We were waiting and up you popped Allen... Amazing .. no football here... Shed/Buried and Motorbike Show whilst waiting . Top job . 👌
@chipperkeithmgb
@chipperkeithmgb Месяц назад
Bloody football
@ericwilson2585
@ericwilson2585 Месяц назад
Hey Allen! I gotta say, having patients is awesome. Cheers Charlie!
@kcraig51
@kcraig51 Месяц назад
One thing I've learned over the years; The importance of wood blocks in a shop can't be underestimated. It's a good thing you caught the crankshaft in wrong. What a surprise it would have been when it took off backwards when you tested it!
@gazzafloss
@gazzafloss Месяц назад
Beautiful work Allen, your vast experience with machining using ordinary "off hand" machine tools certainly shows. Thanks again.
@ReinhardPriller-ck9ny
@ReinhardPriller-ck9ny Месяц назад
a perfect example, how brain beats machines. Allan with his know-how and skills is more precise on his lathe then others with cnc machines, costing millions.
@MadJock-jv6ue
@MadJock-jv6ue 25 дней назад
When I saw the slip gauges which, I haven't seen any sets for over 40 years it took all my self-control not to buy some. Then I remembered Allen's mantra "you only need a few good hand tools and a lathe" so I resisted.
@AllenMillyard
@AllenMillyard 24 дня назад
Love a box of slips 🙂
@billdagoe7371
@billdagoe7371 Месяц назад
I love watching these videos by Allen. It's like watching a surgeon but with metal. Fascinating!!
@garysmith1178
@garysmith1178 29 дней назад
Excellent Allen, love watching these episodes and I always look forward to the next instalment. Its great how you incorporate the wildlife in your garden too. 😉👍
@nickrider5220
@nickrider5220 28 дней назад
I feel relaxed and content after another great video. As long as Allen does his wonderous builds, Tracy makes her cup cakes, the garden animals are well and Charlie the bartender continues making cocktails, all is well in the world !.......at least for a while until reality seeps back in 👍🏻
@rick66649
@rick66649 29 дней назад
Allen's voice and the ticking of the clock I'm struggling not to nod off ..very relaxing ..Bob Ross had the same effect on me😊
@ChefEarthenware
@ChefEarthenware Месяц назад
I've no interest in the esoteric engineering, but I find these videos relaxing.
@Hungry_Hunter
@Hungry_Hunter Месяц назад
It truly is one of life's pleasures to watch skilled hands assemble and explain how easy it is to install a crank shaft back to front. Charlie spotted it first I bet.
@bigc7t
@bigc7t Месяц назад
I can't wait see the this when you are finished, IMO it will be better than new, awesome stuff, thank you for the video.
@noelcastle3986
@noelcastle3986 Месяц назад
Allen's commentary is so calming and the expert way he handles all tools shows his natural abilities with these complex machining and fitting tasks.
@gwaithwyr
@gwaithwyr Месяц назад
I am always pleased when Allen says he was pleased.
@splodge5714
@splodge5714 Месяц назад
I was screaming 'you've put the crankshaft in the wrong way" ... admittedly that was after you'd told us but even so. Another great video, cheers.
@AllenMillyard
@AllenMillyard Месяц назад
🙈
@vo1968
@vo1968 Месяц назад
School boy error there Millward, only jokin', you're the master. Brill work.
@oluffriesthomsen7680
@oluffriesthomsen7680 Месяц назад
Amazing, Allen is Actually able to make mistakes, put the crank in the wrong way. That shows he is Human, not Actually super Human. 😙 So soothing to watch his videos, love them. Just perfect. 😉
@retromechanicalengineer
@retromechanicalengineer 29 дней назад
Those were beautifully made liners. I'm enjoying seeing this prototype morph into a production engine.
@charlottegrieff662
@charlottegrieff662 Месяц назад
I can't wait for the next installment. I'm very much enjoying this series.
@cuddlestsheep5863
@cuddlestsheep5863 Месяц назад
Another engineering master class that is just perfect....
@DW-we3qn
@DW-we3qn Месяц назад
This engine is going to run just perfect. Can't wait to hear it run.
@31144
@31144 29 дней назад
Good to see the old Verdict still earning it's keep Allen 👌
@shelby.daytona6890
@shelby.daytona6890 29 дней назад
Allen you sir are a saint...to mechanics and gear heads all over this planet...installed the crankshaft backwards and showed it to us all...❤❤❤
@ninja1150
@ninja1150 Месяц назад
Fair play to you Allen, for including the crankshaft installed the wrong way round, odd the gears lining up both ways 😮 Quickly rectified after realising. Now its just perfect. Always a joy to watch and can appreciate your methodical method.
@davec1768
@davec1768 Месяц назад
Great video as always Alan. Everyday’s a school day watching you, many thanks. 👍
@simonlunt353
@simonlunt353 Месяц назад
I can’t believe you made a mistake Alan 😮love the clock ticking in the background no music just you telling us what you are doing just perfect can’t wait for your next video 😊thank you
@AllenMillyard
@AllenMillyard Месяц назад
I was editing video clips real time as I was assembling the engine and thought it would be fun to leave it in the Final Cut ✂️
@elizabethpedro3103
@elizabethpedro3103 Месяц назад
Watching Allen work is a privilege,,,,,,from Portugal
@caseywolters6532
@caseywolters6532 Месяц назад
Absolutely brilliant, Allen-- your attention to detail is beyond belief... I would love to meet you someday, to shake your hand and compliment you in person👏
@4thdimensiontravels855
@4thdimensiontravels855 Месяц назад
It is so awesome that we get to see you in your element. Were all very pleased with that Mr. Millyard. Great job.
@user-hl4jy5zm4m
@user-hl4jy5zm4m Месяц назад
Its Allen's attention to detail that never ceases to amaze me.
@georgepitchley3946
@georgepitchley3946 29 дней назад
Love your selection of tools, you go from a fantastic set of slip gauges to opening the bearings with scissors on a Swiss Army knife, these are a brilliant set of videos.
Далее
Norton Nemesis V8 rebuild - Episode 11
19:54
Просмотров 125 тыс.
FIRST DRIVE OF THE AUDI R8 I REBUILT THE ENGINE ON!!...
34:44
Old Style Vice - Extremely Rare to Find so I Made One
52:14
Norton Nemesis V8 rebuild - Episode 12
25:19
Просмотров 112 тыс.
Inside the B-17 Ball Turret
18:59
Просмотров 2,5 млн
I Bought a Brand New 1975 British Motorcycle(Rare)
30:40
Damascus Steel From Milling Chips!
15:47
Просмотров 1,3 млн
I made a precision gearbox - with NO GEARS.
30:09
Просмотров 1,5 млн
Millyard Kawasaki S3 500 Twin cylinder two stroke
11:31