Тёмный

Not What I Thought It Was 

HVACR Survival
Подписаться 40 тыс.
Просмотров 13 тыс.
50% 1

This video takes a twist. What appears to be the problem was just part of a symptom. It wasn't until after fully cleaning it did my test show me what was wrong. This is the second one I found like this, it's kind of tricky because you don't see it everyday. I'm always reluctant to make that decision because of the cost involved.
- Purchase your tools at www.trutechtools.com/?AffId=13 and use the offer code SURVIVAL to save 8% on your total purchase (exclusions may apply) -
- TOOLS I USE -
FULL LIST ON THIS PAGE - kit.co/hvacrsurvival
💥 Amazon Store: www.amazon.com/ref=as_li_ss_t...
SHORT LIST IS BELOW
RIDGID 31305 Model E-110 9.5" Offset Hex Jaw Pipe Wrench - amzn.to/3Bar08y
Klein Tools Ratcheting Box Wrench 1/4 x 5/16 amzn.to/3GOpBrG
KNIPEX Tools - 10" Pliers Wrench amzn.to/3U7RRJf
KNIPEX Tools - 10" Cobra Water Pump Pliers amzn.to/3Wje8Wn
Knipex Tools - Mini Pliers in Belt Pouch amzn.to/3WguyyH
KNIPEX Tools - 4" Cobra XS Water Pump Pliers amzn.to/3UaQiKA
Bahco -6" Wide Mouth Adjustable Wrench amzn.to/3sHIsMV
Bahco - 8" Big-Mouth Adjustable Wrench with Rubber Handle - amzn.to/3SPhDB7
Knipex - 9.5-Inch Ultra-High Leverage Lineman's Pliers amzn.to/3DTLJ2h
Klein Tools Diagonal Cutting Pliers with Angled Head - amzn.to/3zuBVJb
Klein Tools Stripper, Crimper Tool - amzn.to/3gQQ6Su
Klein Tools Wire Cutter and Wire Stripper - amzn.to/3Fs627W
Klein Tools Kurve Wire Cutters, Heavy Duty Wire Stripping Tool - amzn.to/3FseIuW
Klein Tools Heavy Duty Automatic Wire Stripper - amzn.to/3SQdZab
Klein Tools Crimping and Cutting Tool - amzn.to/3TPIgXU
Klein Tools Screwdriver Adjustable 4 to 8-Inch amzn.to/3Nl6KWz
IDEAL INDUSTRIES Digital Circuit Breaker Finder - amzn.to/3DoBFwm
Fluke 376FC AC/DC Clamp Meter with iFlex - amzn.to/3UaNyx2
Fluke 62 Max Industrial Infrared Thermometer - amzn.to/3SNdwWg
Fluke 902 FC HVAC True-RMS Clamp Meter - amzn.to/3Ws7OfB
Fluke 87V MAX - amzn.to/3U6Rlv9
Fluke Networks Pro3000 Tone Generator - amzn.to/3WedklG
Fluke - FLUKE-52 Dual Input Digital Thermometer amzn.to/3zwFdf1
Ideal Safe-T-Grip Fuse Puller - amzn.to/3zsw2w4
Klein Tools Canvas Zipper Bag - amzn.to/3WgnJxq
Uni-Paint PX-20 Oil-Based Paint Marker - amzn.to/3sE3R9T
5 Gallon Bucket Topper and Organizer - amzn.to/3sGi2Ll
Stabila Magnetic Pocket Level PRO with Holster - amzn.to/3FtYLo0
Clip & Carry Kydex Multitool Sheath for LEATHERMAN SURGE - amzn.to/3TPJfHA
Kydex Multitool Sheath for LEATHERMAN WAVE & WAVE + PLUS - amzn.to/3sJlhlg
Cooper Atkins Thermistor Thermometer - amzn.to/3DLeHkC
GEARWRENCH Internal/External Ratcheting Puller 7 Ton 2 or 3 Jaw - amzn.to/3FxTU5l
- CONTACT INFO -
hvacrsurvival@gmail.com
- FOLLOW ME -
Instagram - / hvacrsurvival
Facebook - / hvacrsurvival
Warning Notice Disclaimer - Video content listed on the channel HVAC*R Survival is for entertainment purposes only and not meant to be a substitute for not contacting a competent HVAC/R PROFESSIONAL. Do not attempt anything said or seen on my videos, The tasks that are shown are dangerous and deadly without proper training.
This page contains affiliate links, which means that if you click on the link and make a purchase, I’ll receive a small commission. HVAC/R Survival is a participant in the Trutechtools, Amazon Services Associates Program.
#hvacrsurvival #hvaclife #hvacservice #hvacr #refrigeration #troubleshooting

Развлечения

Опубликовано:

 

24 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 77   
@tonyp6088
@tonyp6088 4 месяца назад
Pressure readings would have been a giveaway. High suction, low head = inefficient compressor
@punchpunchowned
@punchpunchowned Год назад
I just chased my tail for a couple calls on a DUKE subway prep table. SAME thing. Thanks buddy
@philltafolla
@philltafolla Год назад
Once I head the compressor noise I knew it was a wrap . Those big body Tecumseh compressors made in France aren’t the best. Good video Rick
@teldarion5277
@teldarion5277 Год назад
Thanks a lot for all the video you put out ! Im a starting Hvac tech. And Its so hard to get someone to teach you the rope on the job ! Im glad I stumble on your channel I learn so much by looking at your video !
@HVACRSurvival
@HVACRSurvival Год назад
You guys like you are exactly the reason why I am making them. It means a lot that to hear it is helping.!
@natepeterson7145
@natepeterson7145 Год назад
​@@HVACRSurvivalYour videos are one of the top two IMO Rick. You have so many skills all in one that it's hard to not watch them all. Missed the last months worth due to moving in Ted's town but will catch up today. Been watching since you were at the previous company where you made the lift system. Please keep posting you're doing great! I also like that you're humble like me and are not scared to work on multiple facets of the industry.
@cp22eAtCali
@cp22eAtCali Месяц назад
Thanks sir. Good job!
@brushben22
@brushben22 Год назад
Great continent. Just an update on the 404A walk in freezer issue with the short cycle in summer. I got on the roof to drop the cut out to 2 instead of 5 and found that the pressure switch is acting up. It was set all the way up to 8 psi before cutting out at -2psi. I adjusted it to shut off at 2 psi but that required me to brink the pressure control all the way up to 12 psi. I will be ordering a new one. Thanks for the advice and your time
@HVACRSurvival
@HVACRSurvival Год назад
I hate when they don't act up while your there. good catch!
@brushben22
@brushben22 Год назад
For sure, I totally misspelled what I wrote in the previous message. Thanks again for your help Take care
@HVACRSurvival
@HVACRSurvival Год назад
We're technicians, we're smart enough to read it a couple times and figure it out😆💪
@keovongvilaykeo4799
@keovongvilaykeo4799 9 месяцев назад
Always great 👍 thanks 🙏 you 😊
@BdubMack
@BdubMack Год назад
"Not that happy stinky either" lol yeah I know what you mean 😂
@HVACRSurvival
@HVACRSurvival Год назад
🤫🤫🤫
@jasonjohnsonHVAC
@jasonjohnsonHVAC Год назад
Nicely done. Can't say i ever opened a start relay before. That was cool to see. Thanks for the video Rick
@HVACRSurvival
@HVACRSurvival Год назад
Taking things apart is how I learn
@durp5468
@durp5468 Год назад
Great video! When the start capacitor is hot what I’ve found sometimes is the potential relay contacts are getting stuck closed and since those start capacitors aren’t supposed to stay in the circuit while the compressor is running they get hot. And then the compressor can get hot from more current flowing through the start winding than normal.
@HVACRSurvival
@HVACRSurvival Год назад
All sounds true to me.
@user-bu9vg6ew5d
@user-bu9vg6ew5d 11 месяцев назад
INSTEAD OF FUMIGATING THE STORE WET THE CONDENSER FIRST!!!!!BEFORE BLOWING IT!!!!
@Eddy63
@Eddy63 Год назад
Good ole Sunday vid ... Thx Rickster
@johnwalker890
@johnwalker890 Год назад
Great job Rick, You tried your best.
@stevencossaboon3237
@stevencossaboon3237 Год назад
Nice work Rick. Thank you for the knowledge.
@fshn76
@fshn76 Год назад
Great video as always Rick. Always learn something new. Getting ready to start new job doing commercial HVACR and have been binge watching all of your videos hoping to catch tips and tricks.
@FPHA697
@FPHA697 Год назад
Thanks for the video Rick. Always a pleasure watching these!
@HVACRSurvival
@HVACRSurvival Год назад
Thank you so much for watching!
@sterlingarcher46
@sterlingarcher46 Год назад
Boy changing that compressor must be so much fun eh !
@HVACRSurvival
@HVACRSurvival Год назад
It was a real hoot. 😂
@toddmaxwell9803
@toddmaxwell9803 Год назад
I THINK when that night shade is pulled down the dixell will run the machine at a lighter capacity for energy conservation, sometimes it'll be setup to raise the setpoint with curtain down, great video!
@ericpaul4575
@ericpaul4575 Год назад
And the light on the controller was indicating night mode.
@HVACRSurvival
@HVACRSurvival Год назад
@@ericpaul4575 okay that sounds believable but you can't let the temperature get above 40° with milk in it? What changes in that mode?
@ericpaul4575
@ericpaul4575 Год назад
Only thing I can think of is the number of defrosts. It would be safer to do a long defrost with the night shade down.
@thyself1985
@thyself1985 Год назад
That shade connecting into the gray "temp sensor" and kills lights and puts to night mode aka knows shade is closed
@eunachooo
@eunachooo Год назад
@@HVACRSurvival night setback
@semidvdcdt8433
@semidvdcdt8433 Год назад
When you pull down the curtains, there's a magnet at the bottom of it and it aligns with the switch at the bottom ( going from the top of the plastic bottom part ) to the digital input of the dixell. It goes in eco mode/energy saving mode.
@HVACRSurvival
@HVACRSurvival Год назад
Thanks for the info👍👍
@erickwardwell962
@erickwardwell962 Год назад
Good lord. 3 condensor fans. 2 water evap pans. No room to work. Thats a unit i would not sale to anybody.
@HVACRSurvival
@HVACRSurvival Год назад
🙏👍👍
@liam3284
@liam3284 3 месяца назад
The suction came up far too fast when you shut it off.
@user-ge5le4ku6j
@user-ge5le4ku6j Год назад
the only thing i would have done different would be checking the compressor ohns first. if it is in range, then the start components. i do like your workmanship.
@HVACRSurvival
@HVACRSurvival Год назад
🙏🤜🤛👍👍
@EverythingHVACR
@EverythingHVACR Год назад
Nice job Rick! 👏
@HVACRSurvival
@HVACRSurvival Год назад
Thanks, my main man Stevo!
@zekenzy6486
@zekenzy6486 Год назад
Great Video. Thank you for sharing
@HVACRSurvival
@HVACRSurvival Год назад
🤜🤛👍👍
@CM-ou4zr
@CM-ou4zr Год назад
Binge watching all your videos as I'm moving from commercial AC no R to coolsys lol. Thanks man
@HVACRSurvival
@HVACRSurvival Год назад
That's awesome, I appreciate that. Isn't that the same company Brett Wetzel works for?
@fshn76
@fshn76 Год назад
@@HVACRSurvivalyes Bret works for them.
@CM-ou4zr
@CM-ou4zr Год назад
@@HVACRSurvival it's a nationwide thing they bought out a bunch of other companies
@eastcoast186
@eastcoast186 Год назад
Great video thanks 👍👍👍🇺🇸
@scottjones7279
@scottjones7279 Год назад
Great video
@throttlebottle5906
@throttlebottle5906 Год назад
it was the technician! 🤪 that was easy to miss, but the sound of compressor on video was eww yuck. sometimes a camera/mic is better at picking up weird noises, it would be wise to record a clip moving around slowly and go listen somewhere quiet. it just may help save a headache😋
@HVACRSurvival
@HVACRSurvival Год назад
There's times I hear it but man if I'm wrong and I just make a guess at it.... that's $1000 to $1500 wasted and still don't have it fixed. So I'm always leery about condemning that until I'm for sure.
@throttlebottle5906
@throttlebottle5906 Год назад
@@HVACRSurvival yeah, it's always a tough call.
@AVR-hf1rl
@AVR-hf1rl Год назад
Good old AHT
@MinhNguyen-wc3jl
@MinhNguyen-wc3jl Год назад
Checking temp prob High pressure switch Compressor Should be check first
@harrydickson4575
@harrydickson4575 Год назад
👍👍👍
@R290s_biggest_fan
@R290s_biggest_fan Год назад
I worked on one of these. Parts are expensive for them.
@HVACRSurvival
@HVACRSurvival Год назад
The compressor was a pain in the butt to change.
@jonnymac31
@jonnymac31 Год назад
Cool, man
@HVACRSurvival
@HVACRSurvival Год назад
Hope you are doing well!
@thesilentonevictor
@thesilentonevictor Год назад
Good work Rick
@landonferguson7282
@landonferguson7282 Год назад
I have an old Sears mini fridge, that's made by Sanyo. I don't know exactly how old it is, but it seems to be from either late 70's or early 80's. All I've had to do to it was replace the old mechanical thermostat because it was short cycling, so I put a digital one in. I also upgraded the efficiency by upgrading the insulation from fiberglass to styrofoam. The only thing that worries me is that the compressor gets up to 165°F. Do you think I should add a fan to blow air over the compressor?
@HVACRSurvival
@HVACRSurvival Год назад
The say the discharge temp should stay under 225*f
@AVR-hf1rl
@AVR-hf1rl Год назад
It means night curtin is pulled down
@mikedillon6233
@mikedillon6233 Год назад
So, are you guys with experience I have a question. It seems to me, as an outsider looking in, the HVAC business is basically changing filters and replacing bad compressors and bad T x v valves and And relays. With the side of don't fiddle with this compressor, don't stack stuff in front of the chiller units in the walk in coolers, and don't cut or poke holes in the evaporated coils so that all the coolant leaks out . Is that pretty much it?
@HVACRSurvival
@HVACRSurvival Год назад
😂😂 The same could be said of a family Dr. They prescribed medicine that has side effects that require more meds, they have someone else check your blood pressure, your pulse and weight. They look in your ears, listen to your heart and ask stupid questions like are you having money problems, feel safe at home or want to harm people? Sound familiar? Everything looks easy from the outside.
@mikedillon6233
@mikedillon6233 Год назад
@@HVACRSurvival That's the truth . I know i'm not the one dragging tools Up the ladder, or we're trying to get my fat hands into the tiny space at they left for the compressor, or are you fill in the Blank! The thing I try not to forget is that with all that experience, It just looks that simple . It doesn't figure in the thirty or forty plus years of doing it!
@HVACRSurvival
@HVACRSurvival Год назад
Don't forget most people needed to pick a career and the stuff I get paid for are things I use to do for free or fun. I have more freedom to do what I want and when I want then most careers. I've never had to worry about getting laid off or if my job will be made obsolete, It's been a recession proof, it's also a skill that I can do after hours if I wanted to make more money plus I'm paid very well.
@christophergonzales1321
@christophergonzales1321 Год назад
It don't slide out?
@HVACRSurvival
@HVACRSurvival Год назад
Nope. Compressor hits plus other things were in the way
@austrianpainterhidingfromt5920
What type of fluke meter is that? It reads hz too, ot looks like. That would probably be great for inverter systems.
@HVACRSurvival
@HVACRSurvival Год назад
Thats the Fluke 902fc, Its the hvac meter but I have the Fluke 376fc that has the feature that your talking about.
@austrianpainterhidingfromt5920
@@HVACRSurvival Thank you for clarifying!
@steveblake8766
@steveblake8766 Год назад
396 thumbs up
@shine-cg9uf
@shine-cg9uf Год назад
❄️👍💪🇺🇲🙏
@publicmail2
@publicmail2 Год назад
A cardboard shroud to a shopvac when blowing condenser?
@HVACRSurvival
@HVACRSurvival Год назад
They have one that's very similar to what you're talking about. It's made from actual tarp material. I was gonna buy it when I first started but the wet towel works fairly decent.
Далее
Reach In Cooler & Freezer + Walk-in Freezer Problems
23:00
Meat Case Is Warm! Fix It Today Please...
22:10
Просмотров 19 тыс.
Штаны легионера
00:44
Просмотров 267 тыс.
Викторина от МАМЫ 🆘 | WICSUR #shorts
00:58
Double Compressor Failure Was Not Enough Excitement
24:37
Awkward Dining Experience
24:41
Просмотров 12 тыс.
Capacitor and Hard Start Myths Busted
28:41
Просмотров 220 тыс.
Hussmann Fresh Meat Case In Alarm
24:56
Просмотров 11 тыс.
Commercial or Residential HVAC | Which Do I Prefer??
21:43
Breaker Tripping On Kitchen RTU or Is It?
16:43
Просмотров 9 тыс.
Best Fan? Let’s Find Out!
16:47
Просмотров 330 тыс.
Chiller & Boiler Has The Farts
25:49
Просмотров 14 тыс.