number plate fitting 

Nooooooo🙈..... black cover should be on the 8. White spoils the plate !

Just a reminder - although this video was accurate when released - the legislation has since changed for BSAU145e (September 2021). Screw fixings are no longer advised (but permitted), however if screws are used they must be positioned outside of the readable area, so no longer allowed through or between the characters etc.

Should have drilled the holes either side of the reg, looks so bad white cap on black, cowboy job

Never drill a plate through the front face as it pushes the backing away and allows damp in. So....always drill from the back through to the face. Good video though.

How would u drill into the bumper of the vehicle if there are no holes or u want to make new holes

Only thing I would add is make sure the original plate was hung square

A black cap on the number would have looked better

Great video guys - would also suggest either using a black cover for the screw going through the number or the use of a permanent black marker to prevent mis-read of number plate.... there's some picky coppers' out there :o)

Sti no vxr all the way

what if the screw head is damaged. how do you get it off then?