In this video, the construction stages of the 4WD obstacle avoiding car project created using Arduino and HC-SR04 Ultrasonic distance sensor are explained. The codes of the project designed as 4WD (4 Wheels - 4 Wheel Drives) can also be used for 2WD (2 Wheels - 2 Wheel Drives) vehicles. L298N was used as motor driver in the project.
Project codes and connection diagram are in the link at the bottom. Hope it's useful...
Timeline of the video;
00:00 Check-in
00:23 Bill of Materials
01:30 Construction stages
04:30 Vehicle chassis assembly
11:13 Wiring diagram and wiring
16:17 Reviewing the codes and uploading them to the card
19:30 Testing the operation of the vehicle
To subscribe to the channel;
/ @orhanceleprobotik
My published books;
1- Step by Step Arduino Applications
2- Step by Step Arduino Coding with Mblock
3- Micro:bit coding with Code Blocks
To order my books;
pangeakitap.com/
NOTE: In order to download the code and connection diagram, you must right click on the file that appears on the page that opens after clicking the link below and select download. Sometimes you may need to sign in with a gmail account. Can't download over phone. If you have a download problem, try with another browser. You must use a rar or zip compression program to open the downloaded file.
To reach the code and schema of the project;
drive.google.com/drive/folder...
#arduinoproject , #obstaclerobot
1 июн 2024
