One more thing if you cut the tenon on the malit handle or stool leg while the branch or small sapling is still attached to the tree or ground it'll stay still for you sweetheart!!!! With my Wrench you can stick a six sided shaft through it put screw driver handles on the shaft and twist and pull the tenon cutter right off much easier!!!
I've subscribed to your channel sweetie!!! And if you polish the cutting edge face all the way to the top of the drill flutes it won't load up nearly as bad!!! And when you sharpen the eye 👁🗨 don't chamfer the Inside diameter or it will try to tighten up while you're cutting the tenons for your drill holes baby cakes!!!! I just can't wait until you see my detachable auger Settlers Wrench!!! Much Much easier to use!!! I made a video of it sweetie!!!!
Gosh honey 🍯 Bear 🐻 wait until you check out my detachable auger Settlers Wrench my love 😍!!!! You just may be impressed and make one for yourself sugar!!!!
Sweetheart it's open in the bottom so you can use the belt sheath as a hand protector during use of the tenon cutter or scotch 👁🗨 eye 👁🗨!!!! And there's no buckle on it that riveted on strip in the back is for your belt honey bear!!!! But I found it to be an antiquated design so I resigned a better version that's extremely easier to use and store and take up less space on your sweet narrow hips sugar bear!!!!
I have 3 of those tools. I think you got one of the prototype tools which Shawn the inventor sold for a discount. The prototypes don't work as good as the final production product. You are having to work way to hard to get the tool to work properly. I've used my tool extensively.
@@OdinswolfSurvival he sold them to the public for a discount. He stated that they were prototypes or had manufacturing flaws and not a hundred percent up to par. Whether battleborn bought them or not is another story. With a good tool after you cut the dowel on the leg the tool should slip off the dowel without much force. If it's hard to get the tool off it was probably one of the prototypes or manufacturer flaws. I have both.
