Odin Works 22 ARC AR15 In-Depth Overview

Подписаться 361 тыс.

Просмотров 28 тыс.

50% 1

Full Story: ultimatereload...
UR on RUMBLE: rumble.com/ult...
UR on Patreon: / ultimatereloader
Hornady’s 22 ARC was designed for the AR platform. I’ve done a lot with this cartridge in a bolt-action, but am just now building a semi-auto with ODIN Works. I'm putting it to work to get a feel for the platform, and the unique touches Odin Works has put on this rifle. Check out the results!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RU-vid channel (gavintoobe).
Any reloading data supplied on this RU-vid channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RU-vid channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
Odin Works
Hornady
Wheeler
Athon
Longshot
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereload...

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@barrymccockiner6641 3 месяца назад

Hooray! All the gun channels are simultaneously releasing ARC reviews today!

@meanman6992 3 месяца назад

There’s NDA’s prior to certain release dates dork.

@hbetz5300 2 месяца назад

I know man I noticed that too…..

@Kentucky.Tactical 3 месяца назад

My 18 inch 6mm ARC is running a Odin Works barrel and shoots sub MOA all day. I just built a 16 inch 22 ARC (video on my channel) using a Faxon barrel and it's sub MOA also.

@edwardh1591 3 месяца назад

I’m glad you could find factory ammunition. I own the 18” upper in 22 arc from Odin works. I am averaging 3130 fps with the 62 grain. The 22 arc shoots like a laser out to 300 yards. Love the caliber. Had to make my brass out of 6.5 Grendel brass. The rifle has sub moa capability.

@willpiersonw.v.4264 3 месяца назад

I'm running the ruger gen 2 Predator in 22arc. Scope is an Bolt TL 35 thermal. Coyote hammer here in central West Virginia. Love this channel Gavin keep the excellent content coming brother

@luckyshotammunitiongunsllc2369 3 месяца назад

Great video man.. taking it back to your roots and i love it

@naomihalliday-cox6614 2 дня назад

I am a Prairie Dog hunter. Currently I have 3 AR's with only one for P Dogs in 224 Valkyrie using Hornady 60 grain V Max. The 22 ARC is superior ballistically but I am waiting for th 22 Creedmoor. I would have to go to a large frame AR 10. I have spoken with Hornady and they will have the 22 CM out in less than a year due to having granted a one year exclusive to the company "22 Creedmoor".

@tomfowler5070 3 месяца назад

Thanks Gavin, Guy, and all the Ultimate Reloader folks, your content is always entertaining and an insightful resource.

@ronmartblog 2 месяца назад

You might recall that I was shooting my Odinworks 6.5 Grendel and 6mm ARC on the ridge for the RCO and I love them both. Definitely super accurate barrels and great support too. My ARC is configured very similar to your 22 ARC including using the same buffer. I have the ARCA+Pic MLOK which is great because I can use my Atlas bipod or RRS tripod with no adapters. I tried to get Harold with the ARC with Travis but we couldn’t see the misses. I have better DOPE now so I think I could do it now. They make great barrels for sure.

@kalindanley2843 3 месяца назад

That's you an garand thumb doing ARC videos today. Guess I'll have to go get an upper now so I can be apart of the cool guys.

@georgewhitworth9742 3 месяца назад

Isn't his the 6mm?

@m4rvinmartian 3 месяца назад

I got news for you... you are apart of the cool guys. If you want to be a part of them, that's a different story.

@kalindanley2843 3 месяца назад

@@m4rvinmartian I was too cool in school. Grammar/spelling kinda own me lol.

@Madmartigan1 3 месяца назад

Great video as always.To answer your question - I built a 22ARC utilizing the Odin Works 18" barrel, BGC and adjustable gas block. I'm running it on a Seekins Precision lower. Shooting handloads with the 62VT, 75ELDM and 75 BTHP as well as the 88 ELDM. Consistently in the .750 to .550 so well under moa through a YHM 30 cal can. It seems to like the 62VT and the 75 BTHP but will still shoot just over an inch or slightly under with the ELDM's. Interestingly - I too have an Athlon 6-24 on mine. Over all I've been quite happy with the performance and incorporate it in to my Montana prairie dog line up.

@chadbaldwin9363 3 месяца назад

I would be more excited about. 22 Arc if i hadn't jumped on the .224 Valkyrie wagon a few years ago. Odin Works makes great stuff though. I love their handguards. They are super light and i love that the barrel nut doesn't have to be lined up with the gas tube, so you can get the exact barrel nut torque you want. Great video as always.

@stevekelley2341 2 месяца назад

I heard of the 22 ARC for the first time today and im intrigued.

@zacbarnholdt5984 11 дней назад

ar 15 22arc is currently begin built. i had odin works 6.5 grendal . it is now 22 arc

@christianlarson6708 2 месяца назад

Gavin, I’ve been watching you for Years now! I’ve noticed you’ve grown in your skills and I absolutely love and appreciate your knowledge. You do have a channel called “Ultimate Reloader.” I was wondering if you could do a build like in this video and actually go through some load development to help guide through fine tuning a load to fit a build. Emphasis on fine tuning a load development! I would greatly appreciate your input and would love to see all aspects of a rifle build. Thanks for all the hard work you put in to your work and videos!

@philipharris1890 3 месяца назад

I have a 224 Valkyrie with a 24” CMMG 7” twist stainless barrel and a Aero Percussion receiver set. I put a Timney Calvin trigger. I’ve shot it +-200 rounds. Looks like your is getting +-100fps better. I’m interested to see how yours does. I wish we could get together and go head to head. LOL Both rifles are stupid cool!

@jimbograves1576 2 месяца назад

Ahh dammit! I want one. Already got a 6arc 16" proof. Love the Odin rig.

@theblishknovk 7 дней назад

I have a 10.5 odin barrel and a 16 inch ultralite odin barrel and love them both. Looking at an 18 inch 6arc next.

@TK-df1xe 3 месяца назад

I’m intrigued by the 22 ARC and I think I’ll build one. As a left handed shooter I always find it a challenge to come up with the parts. But I may already have most of it on hand. I have an extra 6.5 Grendel BCG laying around. Does the 22 ARC use the same bolt? My favorite barrels are from Ballistic Advantage and they have a sweet fluted 18” barrel. I like R2 forend you have on yours. Was thinking of a 15.5” model…… Thanks for the nice video and I appreciate your input on my new project…. 👌👍🤗 By the way, how’s the mass reloading project coming along? 🤔😉

@chadsangster252 3 месяца назад

Yes, running 18" not an odin, but it already loves the 75 gr hornady working on a couple load developments for the 75 grain now.. love the 22 ARC

@o2wow 3 месяца назад

Love the Odin buffer tube with a secondary spring and the ability to cant the buttock for a great fit.

@Gunner40Five 3 месяца назад

Nice job Gavin. Keep up the good work.

@CaptainCreampie69 3 месяца назад

With the gassing issues in 6 ARC I wonder if this is better. I personally wouldn’t buy a 22 or 6 ARC because I am an AR guy and have found that if it isn’t 223/556, 300 Cosby or the LWRCI SIX8 in 6.8 SPC the guns give up some reliability due to having to play games with gas blocks and buffers when I put my silencer on it…

@jeremyacton254 3 месяца назад

I love the arc content. That stock cheek-weld doesn’t look very comfortable.

@Stuart-n7z 2 месяца назад

Have a lot of Odin works stuff.. it’s top notch 👍🏻 great review

@Ultimatereloader 2 месяца назад

Awesome, yes, great gear for sure!

@daveanaman4907 Месяц назад

I am getting My shoulder replacement surgery and I am thinking about getting one for deer hunting I wished more manufacturers made them

@asmcinn 3 месяца назад

Gas block looks crooked (at least from the clip seen in the video), look for greater wear on one side of the bolt carrier's gas key. I'd recommend realigning it and testing groups again. Even a little drag on the gas tube can affect the rifle.

@Deuceblank 3 месяца назад

Odin 223wylde, sub moa all day, some half inch groups. I need a odin grendel barrel now.

@zachstrassburg3729 3 месяца назад

I've noticed the 88 match ammo seems super dirty, after about 60 rounds my bolt is caked in carbon, x-caliber 20" barrel, adj gas block, rubber city bolt. It does stack the rounds, 3 shots all touching at 100

@johns9888 3 месяца назад

Expected barrel life? Barrel lining types? Thought there was a issue about bolt wear also? In depth on these would be great.

@colebeck8407 2 месяца назад

I have the odin handguard on my 22in Rainer arms 22arc been to hot to play around with loads your 62gr load for the bolt gun has amazing es and SD even out the ar need to work with seating depth a lil bring group in

@claywynn4507 2 месяца назад

Thank goodness. Finally, something to do with all those left over Valkyrie 90 gr and 95 gr bullets.

@JaredOblit 3 месяца назад

You nullified the dead blow effect buffer weights are supposed to provide with a small amount of room to move within the buffer. This will potentially cause or exacerbate bolt bounce.

@Ultimatereloader 3 месяца назад

Actually, when you tighten down the plug and secure of the set, screw it rattles slightly so you can’t actually bottom it out.

@m4rvinmartian 3 месяца назад

@@Ultimatereloader Hey does your em4il work? I sent you a msg about a machine shop.

@JaredOblit 3 месяца назад

@@Ultimatereloader excellent design, I should have expected as much from Odin Works! Thanks!

@AC-bl1rl 3 месяца назад

Why not go 5/8-24? Removing extra material for smaller threads seems backwards, to me. For example, I'm going 3/4" on a 7mm Sherman that I have in the works, rather than 5/8".

@Patrick-xd8jv 2 месяца назад

💯

@JonathanBowman-j5s 3 месяца назад

Why haven't you worked on cutting/fitting your own AR barrels? Surprising you bought a pre-assembled upper.

@bertpulaski2492 3 месяца назад

Nice build. Do intend to mess with the .277Fury?

@gmr5480 Месяц назад

Still trying to decide if I want the 18"or 21" odin upper

@RobertRoguski-i5i 3 месяца назад

You should try a savage axis budget biuld with per fit barrels

@meanman6992 3 месяца назад

If the buffer weights can’t slide around in the buffers body, then they’re unable to do their job… which is to act as a dead blow to prevent bolt bounce.

@hunteranglin3750 3 месяца назад

Still waiting on the AR 15 accurizing video

@EmmanuelMoochet 11 дней назад

Can I shoot AR ammo in a 22 arc rifle?

@rollinassassin9499 3 месяца назад

Can we get a good comparison video of 6arc vs 6.5 grendel in an ar platform please

@DrMike-64 2 месяца назад

What is the appx cost for the set up less the Badlands Supp?

@RickyRadar0848 Месяц назад

New to Channel!

@jrb1263 2 месяца назад

That wait list must be long, I am still waiting for a response to an email I sent a few years ago.

@maj.kamper9314 3 месяца назад

What’s the main difference between 22 arc 6 Max and 224 Valkyrie. I built a 224 Valkyrie years back with a Wilson combat barrel. It has been nothing but excellent. What would be the reason to choose the 22 arc or 6 max over the valkyrie. I’ve been wanting a short barreled 6 max lately. That’s why I ask? Thanks

@Bubbybub0077 3 месяца назад

I think the difference is in velocity and standard loadings. 6 Max is a silly cartridge to me personally. It is an attempt to do something but what I dont know. It cannot utilize heavy for caliber projectiles and only minimally increases bullet velocity of comparable weigh bullets between 22 cal and 6mm. To me if short barrel AR performance is what you strive for you are better suited with 300 blackout or 350 legend. 224 valkyrie is good, no doubt, but it left some things on the table. A 22 arc will be pushing an 80 grain bullet about 75-100 fps faster than the 224 valkyrie out of an equivalent length barrel. Also Hornady is being pretty strict about loadings for the 22 ARC just as they were with the 6 ARC. Only High BC heavy for caliber bullets are being loaded for it and it is set up to easily accommodate the 90 and 95 grain projectiles. Now, if you have a 224 and are happy with it, I don't think 75 fps is worth the upgrade. But now when we look at 22 arc compared to 5.56 we see a 150 fps improvement in velocity, that is not nothing. However, I am fully down the path of the 6 ARC. I have a bolt gun, and AR, and am building another bolt gun in 6 ARC. For me it works for pretty much everything I could ask it to do and then some. It has a versatility that I think 6 MAX, 22 ARC, and 224 Valkyrie are lacking. But to each their own.

@asmcinn 3 месяца назад

I'd compare the cases and estimated velocities to see what you'd prefer. The bullet selection varies widely. The 224 Valk is usually and elongated 223, so you won't see much over the "big" 77gr in the 223. The 6 Max has larger bullets, up to 107 gr iirc.

@CaptainCreampie69 3 месяца назад

@@Bubbybub00776 Max is so we don’t have to use a new bolt as well, which with the bigger bolt face in an AR makes it a weak point. 6 Max will be better in an AR.

@runningwithscissors3997 3 месяца назад

Ruger Predator here - fun so far with factory ammo in 88 grain. Dies arrive Tuesday along with 62, 75 and 88 grain Hornady projectiles. Looking forward to playing around with bolt gun data. Rock on...

@m4rvinmartian 3 месяца назад

*So you can look cool.* *And look like you are aware of what caliber is in fashion this dress season.*

@PassionforRifles 3 месяца назад

You did mount the suppressor, RU-vid will be very mad😬

@ZZ-uf4zv Месяц назад

Would shoot even better if it had a custom barrel..

@AnthonysOutdoors 3 месяца назад

That suppressor is obnoxiously long on an already long rifle.

@georgewhitworth9742 3 месяца назад

Cool, let me find someone who asked for you.

@AnthonysOutdoors 3 месяца назад

@georgewhitworth9742 You are going to waste alot of time. I don't need permission from you or anyone else to give an opinion.

@tomjaster309 2 месяца назад

What is the point of the 22 arc it is a next to useless cartridge. Sure its a bit better then 5.56 for it's intended use case but .224 Valkyrie does the exact same thing performance wise as 22 arc but with more case capacity and has already been around for several years. Can you please tell why this cartridge exists and why people would want it over the more well established alternatives.

@trevorRTK74 Месяц назад

224 Valk died and lost a lot of capacity with heavy bullets. 22 arc has hornady backing it along with major rifle manufacturers. Brass is easier to make (6.5 gen, 6 arc). I always shake my head when people call a cartridge useless and talk smack on it. Like dude if you don't have a use or want for it or lack an understanding of what it does then it's not for you anyways so just move on. Find me another cartridge that can push a 65gr bullet at 3100+fps from a 16" barrel and still fit in an ar15 magazine.

@tomjaster309 Месяц назад

@@trevorRTK74 224 does that 223 Ackley improved 204 Ruger. I have cartridge debates at work on the regular with friends and customers. Using the Russian parent case to make brass isn't what I would a benefit. 6.5 Grendel is not very popular today 6mm arc makes sense as a cartridge 22 arc is the answer to a question that's been answered time and time again. Hornady backing the cartridge is a loose argument since federal the other big name in ammunition designed and back 224 which uses a 30 Remington/6.8 spc parent cartridge case. Performance with 22 arc and heavy bullets against 224 and heavy bullets is a pointless talking point also case geometry isn't enough to make up for less capacity which the 224 has more and the same load from Hornady same bullet weight same product line equivalent the 224 out preforms the 22arc according to Hornady own load data on their factory loadings

@trevorRTK74 Месяц назад

@tomjaster309 but 224 died. 204 rug isn't pushing a 65gr bullet at 3100+ especially not from a 16" barrel. federal totally fucked the release of the 224 and only a few people jumped on making rifles for it. I can find available 22 arc barrels for both ar's and bolt guns. 224 Valk are hard to find. I havnt seen 224 Valk ammo in years but I have seen 22 arc granted not much but it's a 100% increase over the 224. They are both very similar cartridges and had federal not dropped the ball 22 arc or as it was known 22 grendel would still be a wildcat. But it's nearly a memory with a few people still buying ammo from boutique ammo manufacturers and near zero commercial support. I liked the 224 but the 22 arc is hear now and it's not going to die as quickly as the 224 if it does die. Add the 62gr eldvt it's a superb cartridge for the small Frame semis and is kicking at the door of 22-250.

@trevorRTK74 Месяц назад

@tomjaster309 as for 223 ackley it is a wildcat. Yes there are tons of wildcats that get to that number but zero off the shelf rifles and zero factory ammo other than the maybe small specialty ammo maker

@trevorRTK74 Месяц назад

@tomjaster309 I also rarely see 6.8spc brass available and it's usually low quality remington brass.