No video :(

Offering for the Twingod

Подписаться 27 тыс.

Просмотров 75 тыс.

50% 1

This is a tachometer, it’s a gauge that is usually in the dash letting you know how fast the engine is spinning, which tells you what you can expect from your engine, power wise and when to shift.
And notice that I said usually in the beginning. A tachometer used to be more of a luxury extra, either available only in higher trims or only on more premium cars. But up until the 2000s, the only cars that still didn’t get them were some proper nuggets, speaking of which...
Hope you enjoyed the video!
Get your stickers here:
925293.myshopi...
Music used:
Pokemon Diamond, Pearl, Platinum OST - Veilstone City
An Jone - Night Run Away - • Night Run Away
Pokemon Ruby, Sapphire, Emerald OST - Rustboro City, Mauville City, Mossdeep City
Media Right Production - Jazz in Paris - • Jazz In Paris
Pokemon HeartGold, SoulSilver OST - Azalea Town
An Jone - Disco Climax - • Disco Climax
Digimon Story Cybersleuth OST - I Can Clown Around Anytime, But I'll Dance
Pokemon Diamond, Pearl, Platinum OST - Jubilife City
#nuggetopolis #twingo

Опубликовано:

8 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 243

@RahLoh 6 месяцев назад

the reason you need the speedo in 2cyl mode is because you only actually have 2 coils, the spark is shared across 2 cyl! its a very french design

@YippingFox 6 месяцев назад

The design, it is very human...

@mr.slaphappy3794 6 месяцев назад

Wasted spark

@lunchtimewatches1854 6 месяцев назад

Kind of like a harley davidson?

@EdgyNumber1 6 месяцев назад

@@mr.slaphappy3794 Nah, its the old school way. I had this in a Ford Escort RS1600i and that was a early 80's car.

@jaydenstephen-gerada5545 6 месяцев назад

Gm also uses this design on a lot of older vehicles that use coil packs instead of individual coils

@no-damn-alias 6 месяцев назад

Who needs warning lights when you have a rattling rpm gauge? Totally understandable

@Oldsmobile69 6 месяцев назад

I mean, I don't expect too much from this channel but the gauge mount looked terrible even by these standards smh

@Zakis_wonderful_world 6 месяцев назад

Exactly. I'm glad we see eye to eye :)

@FuckMargaretThatchher 6 месяцев назад

@@Oldsmobile69Wdym that Gauge mount looks pretty good.

@a.w.p.882 6 месяцев назад

@@Oldsmobile69its a god damn twingo, who cares. It doesnt have to be an engineering marvel.

@user-om9dz9nn4k 6 месяцев назад

@@Zakis_wonderful_worldšta radi mali Slovenac kad napuni 18 let? Traži ćaći u Bosni. HAHAHAHHAHAHAHA

@DollyBoy_1923 6 месяцев назад

I LOVE how you do non destructive modifications to the Twongi! A lot of RU-vidrs I watch sometimes do questionable mods that are often irreversible of which ruin their cars. Plus the mod is actually pretty well executed, so I think it’s justifiable!

@vintageshed965 6 месяцев назад

The tacho needs to be in 2-stroke mode, because the ignition coil are running in wasted spark configuration. Wasted spark means, that one coil fires 2 cylinders at TDC at the same time, one spark ignites the fuel mixture, other is fired into the exhaust, hence why it is called "wasted spark". It saved the Renault the cost of two ignition coils.

@Zakis_wonderful_world 6 месяцев назад

aaaah, I see. I've heard the term wasted spark being thrown around but I've never looked into what it meant. Now I know, thanks 👍

@Gentleman...Driver 6 месяцев назад

Twingos general theme: Cheap

@urban6613 6 месяцев назад

I want to see a 2stroke twingo

@mihoub 6 месяцев назад

Average Renault moment

@kittytrail 24 дня назад

@@urban6613 there are a few rolling around Europe on japanese moto engines. they're totally _riced_ though. 🥴

@lukezaa10 6 месяцев назад

Twingo and many cars from 90s have semi sequential fuel injection and uses wasted spark ignition. That means that injectors work in pairs 1&4 and 2&3. Also there are two coils for cylinders 1&4 and 2&4. So if ECU send signal to coil two spark plugs are ignited. One spark is wasted and not used. I have Safrane 2.5R5 that have similar system but one cylinder is without pair but on my another V6 Safrane all three cylinders have pairs. Also they use generic 4 channel ECU from Bosch that was used in 4 cylinder cars with full sequential injection. I have full technical documentation on twingo and other renaults.

@Zakis_wonderful_world 6 месяцев назад

Thanks so much for the explanation. Would you perhaps happen to have the ecu pinouts of the SIM32 ecu of the blu and also perhaps the Magnetti Marelli ecu that is on the older D4F, like in the grin?

@Omega_SM 6 месяцев назад

@@Zakis_wonderful_world I sent you two Mega links but I guess RU-vid cancelled my comments, where can I contact you to send them?

@lukezaa10 6 месяцев назад

@@Zakis_wonderful_world probably I have at least in technical book. I can share it with you. But i don't know how :D

@Omega_SM 6 месяцев назад

@@Zakis_wonderful_world Anyway, I have the full description of the electric implant and the full service manual of the Twingo, if they interest you I can send them

@Omega_SM 6 месяцев назад

@@lukezaa10 yeah me too! I also have the full service manual and the full description of the electric implant

@ronnenfelt5438 6 месяцев назад

This gotta be the most exciting car project on RU-vid. And you're not actually doing anything crazy, it's just too entertaining to see someone giving some love to Twingo

@kittytrail 24 дня назад

remind me of Alex & friends doing Miles a few years back. lots of entertaining entertainment there! 😋👌

@Stout936 6 месяцев назад

These Twingos make me so darned happy. Truly the little guys of the car world

@jocking3b510 6 месяцев назад

I'd think that the twingo, as many other renaults of the time has something called "parasite spark ignition", where one coil sends out a spark to 2 cylinders at the same time instead of just 1 - so 2 coils are enough for 4 cylinders (and putting a spark into a cylinder which is currently in the exhaust stroke is no big deal). This is probably what causes the rpm gauge to work well only in 2 cylinder mode.

@cavalierliberty6838 6 месяцев назад

Wasted spark.

@jocking3 6 месяцев назад

@@cavalierliberty6838 In my school books it's called parasite ;)

@hellcat3981 25 дней назад

7:22 hahahaha that caught me off gaurd xD

@Robinsgamevlog 6 месяцев назад

Love the Pokémon games songs as background music

@ram_stick_samurai 6 месяцев назад

lol a racing tachometer in a lil' rust nugget is so funny but cool. And make the shift light blue like the car. (and all the red bit on the gauge, and blue interior lights like the digital speedo and warning lights)

@MediumStare 6 месяцев назад

This made me buy a $200 renault clio fromn 1999. Greatest financial mistake i couldve made. worth it!

@TheUnreadableUser 24 дня назад

As a Colombian, i love these videos. The Twingo use once if the most popular cars here and they are dirt cheap, because the first generation was sold until late 2012. Might buy one as a project car

@GrandPotatoe 6 месяцев назад

Who needs a tachometer when the little guy only goes 45mph tops?

@Dziugenonas 6 месяцев назад

Probably to have a better idea of when to shift. Also it does 90-100mph

@GrandPotatoe 6 месяцев назад

@@Dziugenonas I understand the importance of the video. My comment was mostly sarcastic.

@fredpinto_ 6 месяцев назад

I gotta thank the algorithm for suggesting me this. My dad had a green little Twingo like 20 years ago when I was a smol kid and this brings back good memories!

@shenaniganscat4663 6 месяцев назад

absolutely loving this Twongo series! super stoked for more videos!

@muggsHD 6 месяцев назад

my favourite slovenian channel fr fr

@Omega_SM 6 месяцев назад

I usually just shift and revmatch by audio feeling and also if you search on the internet/try yourself you can find the gear ratios and maximum speed (in second it's like 80ish and in third its like 123ish) so you also have a reference to which compare rpms (like, in third at 80ish the engine should be around 3 thousand rpms). For the "lights without turning the switch" thing, if you are concerned about the dimming light of the tachimeter when turning lights on I read on the Italian's Twingo Community that there should be a solenoid behind the tachimeter's screen that you should be able to regolate in some ways (I really don't know how tho, maybe by changing some resistance(?)) so the tachimeter's light won't dim (also you could apply plastic filters upon the led so you can see the speed better). Wonderful fourth gen music as always!

@jetjazz05 6 месяцев назад

0:10 - What a crazy twist of events... every vehicle I have EVER owned where either the tach or the speed fail it has always been the speed. You can guess RPM from speed, but the truth is RPM is so much more important! Love the video, this is in my top 3 favorite RU-vid series. The Twingo and you/your crew really tickle my fancy

@bkgrnd1337 6 месяцев назад

the blu is slowly becoming the best nugget ive seen on youtube

@isomalte 6 месяцев назад

I would be greatful if you'ld upload the 3d-files for doing this mod yourself

@glurak888 6 месяцев назад

Agreed, please please please

@WyvernDotRed Месяц назад

For the 3D printer, I did not expect to see such a relic of an Ender 3 in such a recent version. I personally recommend a Prusa Mini instead, my kit of this model has been very reliable for the two years I had it. The full sized Prusa machines are also well cloned by Sovol, though I don't know if those are still around. If you do not care about relying on a Chinese cloud and app, the Bambu printers offer better value.

@Idontknow-mf7tx 27 дней назад

Yeah was just thinking how happy I'm with my prusa mini too, barely ever do my prints fail and last time was my fault

@liux_0945 6 месяцев назад

Blue 👍

@josefinajosefina Месяц назад

here in Argentina there are a lot of people that 3d print a lot of pieces for the twingo. i have the front speakers “grills” and the air conditioner vent 3d printed too. they broke too easily

@Miles7955 21 день назад

1:16 Yup. Sounds just like me. Drive an unfamiliar car. Money shift an 08 Corolla (Total accident)(Foreshadowing potential issue with shifter bushings), get wrecker engine (Similar km/miles) inspect clutch disk and shifter linkage bushings, both FUBAR. Both got replaced & upgraded before the car made it back on the road... :3

@madmax616 6 месяцев назад

Love your simple and honnest videos, well put together and entertaining to watch, vive le twanko!

@Seiiko. 6 месяцев назад

1k in 1hour congrats i love your content as a frenchie I appreciate someone caring about french nuggets

@reinermiteibidde1009 6 месяцев назад

I'm literally looking for a Reonald Twange right now. I already have two cars and no more space, but I don't care.

@masterkaljami6822 6 месяцев назад

Man, I hate French cars but these videos make me want to own a twingo.

@RobinBlakey 6 месяцев назад

Those rubber grommits are sooo intense. I just put a Sub in my twongi and running the big power cable for the amp through there tested my patience 😅

@earlfenwick 6 месяцев назад

Fun channel! You're sneaking up on Super-fast Matt.Subbed!

@cybertwingo 6 месяцев назад

When i installed my tacho it drove me nuts. First of all, i had no Idea what i was doing, so i fried its board and almost did the same to my coil. Had to get another one from Aliexpress (BTW, i got an LCD one, i think it really works together with the stock digital dash looks). After some research (and talking to some other Twingo owners, i figured it out: since the Twingo uses a wasted spark ignition, i needed a signal condenser, a little gadget that would take the 2 firing signals the ECU sends to the coil, and combine them into a single one for the tach (without leading to interference and shorting, preferrably). Doing that, it worked just Fine. The real trouble was finding a place to put the tacho so that it wouldn't look out of place. That's when having a 3D printer works wonders.

@romanshagiev9205 6 месяцев назад

Good, Anakin, good. Now rev it up to 11,000 RPM.

@madasxyz 27 дней назад

All the references

@battoisoutto6657 6 месяцев назад

If that bed is giving constant adhesion issues consider using some sandpaper on it to remove the smoothness of the surface in the trouble spots. Gluestick also works in a pinch. Also keep in mind with a glass bed that it may take higher temps to get to be actually the correct temp. Pla can be very picky and strange at times. I've had some filaments need to be at 55 degrees heated bed and others needing to be 65.

@tastefullynerdy1161 6 месяцев назад

The Twingo is just peak small car and it means SO so much to me.

@TheRubberDuck 6 месяцев назад

I love watching your progress on the little Twingo's shame the UK never got the Mk1 version of it now

@sushionroad4859 6 месяцев назад

I also had bed problems with my Ender 3. The printer broke down so many times (with driver, mosfet and in the end microcontroller issues) that I decided to buy a Neptune 4 havent had problem since then. Creality does have a serious quality control issue I do have in the end 3 dead mainboards lying around (was probably a psu issue or misfortune in the end but I couldnt bother since the bed was warped too), the connector from the psu to Mainboard melted so I had serious safety concerns.

@enclavegeneral2077 6 месяцев назад

The nuggie has been upgraded

@redzzin75 6 месяцев назад

babe wake up new wonderful world video jus dropped

@tylert6573 6 месяцев назад

They are my favourite nuggets on RU-vid

@Krst22ify 6 месяцев назад

love your style and content!

@Kanrinin01 6 месяцев назад

Like a majority of cars in the 90's, your engine have a wasted sparks system. That means your coil are in reality two coil in on part and it receive two signals for 2 cylinders each. You took only one signal so yeah, it work on 2 cyl setup.

@xdemonwarrior9x4 6 месяцев назад

I'd say buy a blu racing wheel

@angeloswithans 6 месяцев назад

I’ve ordered a sticker. Excited to get it and stick it on my own nugget :D

@Thomas-tf4cm 6 месяцев назад

Adding a turbocharger to the Twingo could really give it some extra kick on the road. I'd love to see how it performs with that extra boost of power. 😮

@NEEDbacon 6 месяцев назад

Ah yes, for sure needs one of those Saf-t-Turbo's that Binky has. For passing safely along 2 lane roads.

@hrvstmn31 6 месяцев назад

Ah yes glass beds on 3d printers, also known as evil.

@UD503J 6 месяцев назад

Legitimately, I thought some of my auto wiring was pretty ghetto until I saw the speaker was taped on with what looked like medical bandage tape.

@alecmajor9 6 месяцев назад

I like the machine gun you've mounted on the passenger door

@DanishSpeakerChannel 24 дня назад

my kia pride has one of those boxes too but i havent got a button and it works fine but it mustve been a 90s aftermarket thing to have the lights turn on when you turn the engine on :D

@hapsti 6 месяцев назад

about the automatic leveling, print a 0Y crtouch offset adapter, the Y axis on the S1 is warped and causes issues because it assumes it isnt when theres a Y offset

@nhansgoofyvideos7581 6 месяцев назад

If you have bed problem like the bed having low spot on the Ender 3, you can install custom firmware with manual mesh calibration to comphensate for it.

@DarkdragonKev 5 месяцев назад

I love watching these videos man 😁

@Zakis_wonderful_world 5 месяцев назад

Thanks, glad to hear they're enjoyable :)

@Tazudoki 6 месяцев назад

You are missing the Neon lights of course!

@freakymusics 6 месяцев назад

great video! keep up the hard work

@offbrandbiscuit 26 дней назад

Glad you and I had the same thought. I feel all cars should have a tacho, otherwise I'd be concerned about knowing when I'm supposed to shift. I wonder if it'd be possible to wire a speedo onto the Twingo as opposed to the digital speedo that it has in the centre of the dash?

@Zakis_wonderful_world 26 дней назад

I haven't looked into that cause I quite like the digital speedo.

@offbrandbiscuit 25 дней назад

@@Zakis_wonderful_world how easy is it to see from the driving position? I'd personally be a bit nervous about that myself having only driven cars with the speedo in front of me

@Thelonedad 6 месяцев назад

phillips led light and tonede windows :D"

@BobTheMartin 6 месяцев назад

You say routing the tach cable was challenging, yet there was a perfectly routed and totally safe professionaly done fog light cable already in place :D

@riedlerhotzenplotz4819 6 месяцев назад

Wait, what... Someone stuck dynaudio midrange dome speakers in there? These might have been pretty expensive at some point.

@DaniP_Killer 6 месяцев назад

i aint much of a twingo guy myself but i think my mate who is into cars could know some stuff

@yugen042 3 месяца назад

You should share the STL files for the gauge cluster after putting in so much work.

@kyugiyeneku1803 4 месяца назад

I would print the guage in ABS or ASA since then you can apply acitone vapour smoothing and it does not look too mouch DIY

@Zakis_wonderful_world 4 месяца назад

That is the next step, when I get an enclosure set up.

@Erebus-PCFX 6 месяцев назад

Just remember that the pre-facelift Twingo did NOT have a fuel-cut. You could basically rev it to death.

@AnnaSue81 6 месяцев назад

i wanna see the twongi on a racetrack, getting redlined thru every straight possible also, do you make the thumbnail/sticker artwork yourself? if so, thats awesome

@GamingKidTwelve 6 месяцев назад

This series will be the number one backing behind your channel until you find another project... *looks at a random shitbox on an auction site*

@theanonymous9781 6 месяцев назад

I installed some really nice angel eyes front lights if you are interested! They look pretty neet and give better lighting

@JaffaCaik 6 месяцев назад

wonderful world sticker going on my alfa giulia, thanks!

@phodon129 6 месяцев назад

Clearly, the next mod needs to be mudflaps. They're the best thing since sliced turbos.

@TERView 6 месяцев назад

love love love the twingo videos, keep em coming :D

@maksvraz8334 6 месяцев назад

Twingo racing division hell yeahh 🏁🏁🏁 Zdj pa hitr rpm limiter ven fuknt, da boš lahko uporabu all the RPM - paid for the full tachometer, gonna use the whole tachometer 😎 Supr video 🤟, še več takih rabm, da lahko prepričam punco o nakupu Twingo 1ke haha (twingo 2ka ji je blj ušeč 😭)

@N4Me7eZz 6 месяцев назад

thx to you guys i now wanna buy a twingo 😂

@KahruSuomiPerkele 6 месяцев назад

It was made as cheap as possible, I googled the price on release and it was 54.000 Francs... or about 8200€ (not adjusted to inflation).

@The_Superior_Self 6 месяцев назад

The wireing part reminds me pf the time i had to figure out why my radiator fan just decided not to wanna work. After almost overheating in stop and go traffic. Some ass-hat decided to just casually joink the radiator fan fuze and splice in a marten defense system wich got crusty over time. I was very pissed yet happy I figured it out and fixed it.

@audiencesmember 6 месяцев назад

Yes! More Twingo tomfoolery!

@carrodaspamonha3580 6 месяцев назад

love the twingo content, makes me miss mine :)

@user-iz9wr4op1h 6 месяцев назад

PETG isn't very resistant to vibrations. So be careful cause it could start to crack internally and fall apart.

@declan2775 6 месяцев назад

I had some pretty terrible vibration in mine, but after I replaced the top engine mount (left side when looking in from the engine bay) it completely disappeared. The mount looked fine visually but it wasn't doing its job anymore, maybe it's similar on yours?

@Zakis_wonderful_world 6 месяцев назад

Thanks for the heads up, I'll check it out.

@your-mom_was_here 6 месяцев назад

Svaka ti čast što imaš živaca da radiš na francuzima

@boo5628 6 месяцев назад

I think a cool thing that you could do with le bleu; a wide body kit with a K series swap

@adamthomas3564 6 месяцев назад

i was literally about to go bed bro you cant do this to me haha

@HookedComrade 6 месяцев назад

My Twingo sprung a nasty oil leak. I bought the sticker for good luck. Pray for my boy 🙏

@Zakis_wonderful_world 6 месяцев назад

hopefully it's an easy fix

@schwuzi 5 месяцев назад

@@Zakis_wonderful_world famous last words

@JingujiSama 6 месяцев назад

We need the stl files !!!

@raverick187 6 месяцев назад

My petrolhead OCD just kick in, and I need to word out of it! Please, can you make same cluster, with oil temperature, but that plastic tray with digital speedometer, that need to be "hacked" to come closer to the driver side, because you don't want chameleon eyes for the rest of the life! 😅

@neromastic4512 6 месяцев назад

Why does this give me 1000 hp Fiat Multipla vibes when you said "Becoming a proper race car" ??

@diecastcarcollector3563 6 месяцев назад

You made me wanna buy the twingo!

@DanRobards 6 месяцев назад

My k11 micra is also missing this important gauge!

@noobyd9767 6 месяцев назад

THERE IS A TWINGO NEAR MY HOUSE, ITS SO FUCKING CUTE! IT HAS GRAY METALIC PAINT AND THE THING ON THE TOP THAT LETS U STORE MORE SHIT!!! I FUCKING LOVE THE TWINGO RAAAAAAGGGHHH

@Renaultenyojer 6 месяцев назад

The renault gods approve this series

@YaMi-cn9mr 6 месяцев назад

I love this idea of reversible making mods reversible! its super annoying to get a car new to you and the previous owner put EVERY gauge known to man on the passenger side of the dash and steering column, (at least they were all defis!) that really should be normalized, but I really hate unfinished textured prints being used as a perm solution, I wish it was more often that prints are finalized with a coating of sorts to make them really look that 100%.

@Zakis_wonderful_world 6 месяцев назад

I wanna build an enclosure so I can print ABS, those prints can be really nice if you treat them with acetone mist.

@YaMi-cn9mr 6 месяцев назад

@@Zakis_wonderful_world they look fantastic! I have got some parts like my accessport mount for my winter car that you can't even tell are printed and people are surprised when I show them the backside and you can see the print lines.

@UDGyt 6 месяцев назад

We gotta get dankpods in here

@Bhernardo_Mocambike 6 месяцев назад

can you put a turbo hayabusa on it ?🙃🙃

@sheppardpat47 6 месяцев назад

Bro. Nuggetopolis sticker is EXACTLY the type of sticker I need I will put it on my Sirion Sport, Copen and AE86!

@Zakis_wonderful_world 6 месяцев назад

Having the ae86 is amazing, but when you mentioned the Daihatsus I was like 👀

@sheppardpat47 6 месяцев назад

@@Zakis_wonderful_world Hehehe my favorite is the 2007 Sirion Sport it’s my daily… lovely car And the Copen is a real go kart ! I’m a huge Daihatsu fan I haven’t got the 86 yet but I’m getting it very soon! In contact with the seller ~ 86 trueno two doors from Japan! Love your videos btw ~

@Zakis_wonderful_world 6 месяцев назад

@@sheppardpat47 you have a sweet taste in cars, I'm also a fan of old Toyotas (and here's a little secret, next project is gonna be my ep70 :) )

@sheppardpat47 6 месяцев назад

@@Zakis_wonderful_world amazing… can’t wait to see it !

@sheppardpat47 Месяц назад

@@Zakis_wonderful_world I put it on my Daihatsu Copen for now, the 86 is coming in about 2 weeks, and the Sirion is still in bodyshop, can't wait to nuggetize them !

@jankirpal1036 6 месяцев назад

Something my Seat Ibiza 6J doesent have, and i want, is a temperature gauge, and a simple fuel economy gauge, sum shit like BMWs have, something simple i think i could run it from the OBD port and along the seems to where i want it, but it can wait

@Rozbujnik_Rumcajs 6 месяцев назад

Made yourself a favor and swap those white/blue tacho backlight for something more eye friendly like amber or red.

@pinkpanther7499 6 месяцев назад

I think that mysterious button is for lpg tank users

@fabriziorasore5353 3 месяца назад

Hey, love the vid! I'm a twongi owner and I'd love to install this mod. Is there any way you could put the 3d file of the support you designed on thingiverse? P.S. Keep it up!🚙

@ausernameidk 6 месяцев назад

Slamming gears in a Twingo :)

@bluemoondiadochi 22 дня назад

"Caveman-style" XDDDDD

@what1865 6 месяцев назад

proper chinese manuel, instead of telling you how to wire inn rpm pulse, it somehow probably through lost translation tell you it wants ice cream

@cathat9622 6 месяцев назад

When is the Blue/Green racing combo going to the Nurburgring?

@NiloGiacomelli 6 месяцев назад

I've always wanted a pair of tachometer and temperature gaiges in my Twingo but never got courage to. Here in Brazil, this car is uncommon and I dont know some profissional who does this kind of job in this car earlier. My fear is do a wrong connection and put the circuits in risk of failure or worse.