Тёмный

Old Model Cordless Angle Grinder Restoration | Hitachi G 18DSL 

Gear Show
Подписаться 690 тыс.
Просмотров 520 тыс.
50% 1

This an old model cordless angle grinder that I bought it from Japan recycle shop price 15$ without battery and charger. I bought new battery case and battery cells from china.
*Cordless Angle Grinder
- Company Hitachi Koki
- Model G18DSL
- Voltage 18 V
- Rated speed 9100/min
- Wheel (outer dia. × thickness × hole dia.) 115 × 6 × 22.23 mm
- Wheel (peripheral speed) 80 m/s
- Rechargeable battery BSL1830: Li-ion 18 V (5.0 Ah, 10 cells)
- Weight 1.8 kg
*Charger
Model UC18YRSL
Charging voltage 14.4 V 18 V
Weight 0.6 kg
*Label text
100mm コードレスディスクグラインダ
日立工機 G 18DSL
日立工機 DC 18V 9100min-1
トイシ 100 x 6 x 15 mm
72m/s{4,300m/min}
⚠警告
●ご使用前に収扱説明書を必ずよくお読みください。
I hope you find this video useful and enjoy!
I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did this video !!!
Thank you very much for your likes, comments and subscribe!
Have a nice day
Gear Show

Хобби

Опубликовано:

 

1 мар 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 312   
@ntsreviewsandvlogs9005
@ntsreviewsandvlogs9005 11 месяцев назад
I had a lot of old pipes and rebar to cut up and from what I read ru-vid.comUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
@God_Dmitriy27
@God_Dmitriy27 3 года назад
Проверять на работоспособность без аккумулятора. А потом разобрать. Гениально👍
@xarogath
@xarogath 3 года назад
Samsung SDI - these are pretty good cells, I owe a few tools powered by them
@gear_show
@gear_show 3 года назад
Yes, it is.
@sennguru
@sennguru 3 года назад
Nice with high drain cells. I Think you should also use pure Nickel strip and then your battery builds Will be 👌
@gear_show
@gear_show 3 года назад
@victor bruun Yes, I will, thank you for the tips!
@johnspanishh6872
@johnspanishh6872 3 года назад
Too much grease.. the gear will get hot and motor will work hard cutting trough the grease continuously
@rabk5702
@rabk5702 3 года назад
Did anyone notice the key fell out of its slot when the crown gear was pushed down into place must have notice as it works fine nice job :-)
@diabolo3506
@diabolo3506 3 года назад
Yes 11:52 exactly.
@agustingonzalo4867
@agustingonzalo4867 3 года назад
@@diabolo3506 ñgyj
@mundodoimperio8179
@mundodoimperio8179 3 года назад
Não mostrou ele colocando de novo 🤣🤣🤣🤣
@mojammelhaque3146
@mojammelhaque3146 2 года назад
@@agustingonzalo4867 জ
@dlggamer7014
@dlggamer7014 2 года назад
same
@getyourkicksagain
@getyourkicksagain 3 года назад
Great job, excellent video as usual, my friend. It is a very good thing you noticed the grinder was rotating the wrong way (clockwise). Using it like that could make the spindle nut loosen and spin the disc right off. Take care!
@victorrs9737
@victorrs9737 3 года назад
la pieza metalica pequeña que va en cabezal de giro se salio ademas faltaron partes por poner 11:56 aprox.
@tomlee7966
@tomlee7966 3 года назад
quality tool to not vibrate off the table great job at showing that, less vibration converts to less fatigue on the tool as well as the user.
@amilcarmoncada1801
@amilcarmoncada1801 3 года назад
Estupenda restauracion de esta amoladora angular, inalámbrica Hitachi G 18DSL, respetos y saludos desde Venezuela💯💯👍👍🤘🤘
@vedantkaothekar8089
@vedantkaothekar8089 3 года назад
Awesome sir Very nice I liked it so much
@gear_show
@gear_show 3 года назад
Thanks for liking
@klfs_6947
@klfs_6947 3 года назад
nice رائع
@philanna38
@philanna38 3 года назад
Yes, pink is a lovely color for men's toys. LOL Nice job.
@ahujeffrey
@ahujeffrey 3 года назад
Great and diverse skills! Liked seeing the demonstration and troubleshooting.
@robertgrell486
@robertgrell486 3 года назад
Perfect renovation . Really very precise work 👍😉
@classydays43
@classydays43 2 года назад
Hitachi tools always had the Nicelodeon Aesthetic long before everyone else did it.
@joewalsh1054
@joewalsh1054 3 года назад
Out of all these dozens of power tool restoration videos I've watched, I don't think I've ever seen a bearing held in with screws like that.
@danaranalengpe9079
@danaranalengpe9079 3 года назад
This is my first time to see a bearing is hold tight by a screw too
@lukie4ever
@lukie4ever 3 года назад
It ain't coming loose quickly that a plus
@sddiymakeitworthit7512
@sddiymakeitworthit7512 3 года назад
Nice restoration like it
@zuzuzaza6211
@zuzuzaza6211 3 года назад
Perfect for cutting any kind of handcuffs in like 3 to 5 seconds 👍
@jasonhull2163
@jasonhull2163 3 года назад
This is back when tools were tools. I really enjoy your Hitachi, Makita, and old Nicad DeWalt drill rebuilds. I like Makita a lot but I still use my old Dewalt 18 volt Nicad drill from the late 90’s it runs great. I’ve had to replace the factory batteries a few times but I keep using factory batteries they seem to be the best, unless I’ve over looked some batteries. I grown attached to the drill and should of just bought new stuff but I will run my old Dewalt until I die.
@heheboi17
@heheboi17 3 года назад
13:05 After fitting again all the parts- Gear Show: Everything is looking OK. If I do the same thing- Me: Where these extra two screws came from? 😂
@Kamidashi77
@Kamidashi77 3 года назад
So, you don't need them. 😂
@heheboi17
@heheboi17 3 года назад
@@Kamidashi77 😂😂
@SOOONJE
@SOOONJE 3 года назад
It is unbelievable how much patience you have,I am interested in purchasing refurbished tools from you
@ThreenaddiesRexMegistus
@ThreenaddiesRexMegistus 3 года назад
The old Hitachi gear was the best money could buy. Then they went on to make some over complicated stuff. I’ve still got Hitachi going back 30+ years. Their airless nail gun was a fail. They really didn’t look at what working carpenters needed. I had one for a few days then went back to Paslode.
@CatalystRestorations
@CatalystRestorations 3 года назад
Awesome job as always! I noticed this vid was mostly at 'normal' speed, which is outside the norm for your vids, but I actually really enjoyed it that way! Very methodical and relaxing.
@sureshghimire2740
@sureshghimire2740 3 года назад
Watching at 4k was so awesome 👌
@ronalmeida2536
@ronalmeida2536 3 года назад
Another good video, I always look forward to them.
@sta-prest
@sta-prest 3 года назад
バターナイフの当たる音がすごい好き
@DANYMITERESTORATION
@DANYMITERESTORATION 3 года назад
Lear plus practice is knowledge indeed - I often watch these instructive videos - I subscribed!
@FerSniper
@FerSniper 3 года назад
Красава!!! Спасибо за видео!!!
@toolreviewsandrestorations
@toolreviewsandrestorations 3 года назад
Great restoration!
@kahlid-ataya
@kahlid-ataya 3 года назад
4:14 this container looks like the top cover of a phonograph
@E-hab
@E-hab 3 года назад
Because it is.
@welshdave5263
@welshdave5263 3 года назад
Always thought this was the dust cover of a record player.
@davidepiccini9254
@davidepiccini9254 3 года назад
So a very restoration drill cutter and angle glider
@user-kt2hb8xr3p
@user-kt2hb8xr3p 3 года назад
عمل رائع شكرا لك اخي Thanks 👍👍
@Masso1973
@Masso1973 3 года назад
Mechanically still new, only very dirty from use. The plastic fantastic retains oil stains very easily.
@felipekrt
@felipekrt 3 года назад
Amazing work! 😍
@real4everh
@real4everh 3 года назад
its obviously working tool nice cosmetic job but the was working without that
@Duc_Giang.
@Duc_Giang. 3 года назад
In Vietnam, the model hitachi priced at 35$ is very expensive.
@slawek12935
@slawek12935 3 года назад
In Poland this model cost 100$, all set with battery and charger cost 490$ is it very expensive
@theaviator8046
@theaviator8046 3 года назад
@@slawek12935 The same Price in Germany. Really Expensive.
@chris_hertford
@chris_hertford 3 года назад
When the lock nut spun off I knew he had the motor spinning the wrong way! I've done the same on a grinder rebuild lol
@sc1petrol
@sc1petrol 2 года назад
Onboard BMS from the battery kit has no cell balance function, so a separate balance module should be installed. It costs about 1 dollar but makes a long and happy battery life.
@cobe3156
@cobe3156 3 года назад
Excellent video my big support
@gear_show
@gear_show 3 года назад
Big thanks
@Marcelo-56
@Marcelo-56 3 года назад
Neat, clear, didactic, quality, I like that 👏⭐
@gear_show
@gear_show 3 года назад
Glad you like it!
@tomharp9325
@tomharp9325 3 года назад
love the continuity check, bark bark, LOL.
@davidasdasd4666
@davidasdasd4666 3 года назад
The sound of the angle grinder... you can here it in the suburbs anywhere in Hungary... Every single day maybe except for Christmas
@asu-5748
@asu-5748 Год назад
Why?
@davidasdasd4666
@davidasdasd4666 Год назад
@@asu-5748 the fuck do I know. They are always cutting or grinding some crap
@michaelfairchild
@michaelfairchild 3 года назад
First electro-meter that barks instead of beeps on connection.
@TIRestoration
@TIRestoration 3 года назад
Good job, specially the battery
@moconasan1976
@moconasan1976 3 года назад
すごいです😺
@moconasan1976
@moconasan1976 3 года назад
@Фанат Сяоми 我会报告
@zexron97
@zexron97 3 года назад
Hey bro nice video
@gear_show
@gear_show 3 года назад
Hey, thanks
@seanyang5925
@seanyang5925 3 года назад
At 18:30, the direction of rotation is reversed, it's dangerous cause of blade may fall off during operation. Glad to see you corrected it.
@inloveoftools2330
@inloveoftools2330 3 года назад
I think you put to much gear grease in gear housing and it will go out or your gear housing will get hot fast...
@jasonhull2163
@jasonhull2163 3 года назад
He packs the gear housing with a lot of grease which is a good thing. Most tools now are greased with grease you can barely feel but they say it works as good. I don’t really buy it as much because my older older tools have lasted a lot longer, I replace brushes yearly or sooner if need.
@NmC11
@NmC11 3 года назад
Great work! 👍👍
@gear_show
@gear_show 3 года назад
Thank you! 👍
@goodidea7086
@goodidea7086 3 года назад
잠이안올때 이영상을보면 잠이듭니다 백색소음👍🏻👍🏻
@kret63
@kret63 3 года назад
The same high quality as always! Keep up the good work!
@gear_show
@gear_show 3 года назад
Much appreciated!
@DerekHundik
@DerekHundik 2 года назад
@@gear_show what software you use to create those labels stickers ?
@user-tr7xs1ke8f
@user-tr7xs1ke8f 3 года назад
Good job! I like it!
@electrostar9949
@electrostar9949 3 года назад
WOW
@nelchan2421
@nelchan2421 Год назад
14:05 tips you dont need a insulator ring for negative side of li-ion battery cell only to positive side
@WELDEROFMASTER
@WELDEROFMASTER 3 года назад
Good videos tutorial next time boss ferfec the best videos you restoration
@goldentoolsbox3955
@goldentoolsbox3955 3 года назад
Wao amazing...
@jesusthemis2599
@jesusthemis2599 Год назад
Bravo belle restauration
@muhendismehmet6379
@muhendismehmet6379 3 года назад
best angle grinder!
@justarideout
@justarideout 3 года назад
What a pleasure to watch. Tont
@user-nl5xd2mq8x
@user-nl5xd2mq8x 3 года назад
Pure works👍
@POOR295NOOB
@POOR295NOOB 3 года назад
Naic work
@soomroim7417
@soomroim7417 3 года назад
Great work
@edilsoncastro4471
@edilsoncastro4471 Год назад
Nota 10 parabéns
@RestorationVS
@RestorationVS 3 года назад
Good Restoration brother 👍
@AnhLe-sl4gb
@AnhLe-sl4gb 3 года назад
Nice video !!
@gear_show
@gear_show 3 года назад
Thanks for the visit
@sharukhmatekuki5830
@sharukhmatekuki5830 2 года назад
Good job🇮🇳👍👍 Kuki
@prasadvn524
@prasadvn524 3 года назад
Nice job
@mohamedzulkifly8966
@mohamedzulkifly8966 3 года назад
1st time saw a power tools that is 'purple' in colour😂
@adamfaristarmizi1488
@adamfaristarmizi1488 3 года назад
Butuh
@sniper31013
@sniper31013 3 года назад
Good job mash'Allah
@im_gayazov
@im_gayazov 3 года назад
Много смазки положил в редуктор.
@user-be9xr5dn4m
@user-be9xr5dn4m 3 года назад
Как гаечку пафосно открутил. Просто дрожь по всему телу пробежала.
@electricalinfohub1543
@electricalinfohub1543 3 года назад
Amazing
@user-sl6be5le9s
@user-sl6be5le9s 3 года назад
Lee Man-Ki 🇫🇷
@DougAndersonisnotdougfunny
@DougAndersonisnotdougfunny 3 года назад
Gear show logo on the battery sticker! Nice touch.
@504ownerofficial
@504ownerofficial 3 года назад
nice work
@Konstantin557
@Konstantin557 3 года назад
Nice Work
@resEG
@resEG 3 года назад
Ericsson 1970 vintage rotary dial telephone restoration
@Rcustom1993
@Rcustom1993 3 года назад
Mantap
@fernandojosevillanuevavega8497
@fernandojosevillanuevavega8497 2 года назад
muy bien
@MuhammadDaudkhanTV100
@MuhammadDaudkhanTV100 3 года назад
Very interesting
@muhendismehmet6379
@muhendismehmet6379 3 года назад
I love it
@alexandres8846
@alexandres8846 3 года назад
Great job mr.gear and the next time mission find a impact wrench! Good luck👍.
@appreendixdecostrix9209
@appreendixdecostrix9209 3 года назад
Cool, very Cool, Nice?
@gear_show
@gear_show 3 года назад
Thanks!
@johnb1121
@johnb1121 3 года назад
I guess this what people do to keep busy during covid 😏😏😏
@istanbulbeykoz4108
@istanbulbeykoz4108 3 года назад
spectacular
@jameshanoomansing1442
@jameshanoomansing1442 3 года назад
bro, where can i buy those battery packs? excellent as usual
@gandasturi7
@gandasturi7 3 года назад
Yesss uploading...
@debzsyarifudin5041
@debzsyarifudin5041 3 года назад
Mantabbb
@Aleksey-Norilsk
@Aleksey-Norilsk 3 года назад
Как говорит некто Евгений: мало смазки!
@mr.makson8050
@mr.makson8050 3 года назад
По лайкам вижу что и наши смотрят японца. Рад этому. Вы о Белгороде?
@Aleksey-Norilsk
@Aleksey-Norilsk 3 года назад
@@mr.makson8050 Да, фраза уже стала крылатой.
@mr.makson8050
@mr.makson8050 3 года назад
@@Aleksey-Norilsk недавно узнал о нем, смотрю, сам в свои 19 решил собирать на мастерскую но для этого надо ♂️Three hundred bucks ♂️ и как минимум болгарка, танк, паркетка, сварочный инвертор а также ударный шурик. Буду брать все на акуме (кроме сварки хотя таковая в продаже имеется 😄). А вы кстати как забрёли на этот канал? Я вот наверное из-за my mechanics или TysyTube restoration.
@Depytat96
@Depytat96 3 года назад
о ком это ?
@mr.makson8050
@mr.makson8050 3 года назад
@@Depytat96 Евгений Белгород. Забей в ютубе, в кругах DIYщиков весьма знаменитый дядька.
@francistaillandier8205
@francistaillandier8205 3 года назад
Hello. How do you manage to reproduce the technical labels of the devices you restore so perfectly? Thank you for your reply.
@yeagerxp
@yeagerxp 3 года назад
Once again Excellent work👍👍👍. Thanks for sharing
@aholesen
@aholesen 3 года назад
Great, but did you clear lacquer the black part of the grip???
@vikassm
@vikassm 3 года назад
"Old" model? Restoration? I still don't own a cordless grinder! That makes me ancient I guess? 😂😂😂
@asu-5748
@asu-5748 Год назад
In My Opinion Cordless Stuff Isn't That Great, They Have Maybe The Same Power But You Have To Recharge Them. If You Own More Of Them It Fast Will Get Expensive For More Chargers And Batteries
@calinsandor9518
@calinsandor9518 2 года назад
I have a very similar hitachi grinder but it's only 14,4 v. I've just repacked the batteries with new cells, but won't start anymore. Check almost everything : rotor good, start button good, brushes good, wires good. I think the aluminum module block could be the problem. What do you think?
@JaWek0
@JaWek0 3 года назад
Did you buy dedicated battery case with correct board? Ive noticed in your previous builds you usually use different boards and you cant use dedicated charger or this time you bought correct batteries. Can you explain us a difference between those builds. I was always wondering why you cant use standard charger. Nice work
@maharishi9111
@maharishi9111 3 года назад
A very good camera work. Need patience and determination to place camera at each sequence of work. Great video for a one man show. 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 🌻🌸💮🌼🏵️🌺🌾🌷🌹
@Robotics-9907
@Robotics-9907 3 года назад
Will you have many tools and old things to restore?
@Kaiser-donya.daikokuya
@Kaiser-donya.daikokuya 3 года назад
Wonderful work! The electric tools and grinding wheel have Japanese printings and others have simplified Chinese printings. Where do you live???
@kaster5339
@kaster5339 3 года назад
Как только гайка с шайбой уехали, сразу было понятно...
@MrLion-uh7ot
@MrLion-uh7ot 3 года назад
what substances you use ?
@kahlid-ataya
@kahlid-ataya 3 года назад
12:13 yummy mango paste 😋
@gear_show
@gear_show 3 года назад
😋
Далее
Antique Rusty Chisel Restoration
14:14
Просмотров 1,1 млн
12V Cordless Drill Refreshment | HITACHI FDS 12DVC
13:23
restored my drill and what a surprise
12:15
Просмотров 9 тыс.
телега - hahalivars
0:12
Просмотров 2,2 млн
😳Ooops 😳 #littos
0:29
Просмотров 6 млн