OLT Default IP address : 192.168.8.100
Default User name - admin
Default Password - Xpon@Olt9417#
For configuration and support call and whatsapp me - 7982145245
OLT configuration step by step on default mode:
Configuring an Optical Line Terminal (OLT) involves several steps to enable it to manage communication with Optical Network Units (ONUs) in a Passive Optical Network (PON). Below are the general steps for configuring an OLT:
Physical Connection Setup:
Connect the OLT to the backbone network via an uplink port.
Connect fiber optic cables from the OLT to the passive optical splitters.
Access the OLT Management Interface:
Access the OLT's management interface using a web browser or command-line interface (CLI).
Enter the appropriate login credentials (usually provided by the manufacturer).
Basic Configuration:
Set the management IP address and subnet mask for the OLT.
Configure system time and time zone settings.
Configure SNMP settings for network monitoring if necessary.
Create VLANs (Virtual Local Area Networks):
Define VLANs for different services or user groups.
Assign VLAN IDs and names.
Create Service Profiles:
Define service profiles for different types of subscribers (residential, business, etc.).
Specify bandwidth limits, QoS parameters, and other service-specific settings.
Configure PON Ports:
Enable PON ports and specify their operational parameters (e.g., upstream and downstream bandwidth, encryption settings).
Assign VLANs to PON ports.
ONU Registration:
Discover and register ONUs connected to the PON ports.
Assign ONUs to appropriate service profiles.
Security Configuration:
Implement security measures such as MAC address filtering, port security, and encryption.
Set up authentication mechanisms (e.g., 802.1X) for ONU access.
Quality of Service (QoS) Configuration:
Define QoS policies to prioritize traffic based on service type or subscriber.
Configure traffic shaping and policing.
Monitoring and Management:
Set up logging and monitoring features to track network performance and troubleshoot issues.
Configure alarms and notifications for critical events.
Implement remote management protocols (e.g., SSH, Telnet) for accessing the OLT.
Save Configuration:
Once all configurations are complete, save the configuration changes to the OLT's non-volatile memory to ensure persistence across reboots.
Testing and Verification:
Conduct testing to ensure that the OLT is properly configured and communicating with ONUs.
Verify service provisioning and quality by testing connectivity and performance for subscribed services.
It's important to note that the specific steps and commands may vary depending on the manufacturer and model of the OLT, as well as the network requirements and protocols being used. Always refer to the manufacturer's documentation for detailed instructions tailored to your OLT model.
17 сен 2024
