OMC Cobra/Volvo Penta - Checking for a Bent Propeller Shaft

Подписаться 15 тыс.

Просмотров 13 тыс.

50% 1

This propeller took a major hit and the aluminum fins are bent for sure! In this video we go over the process for checking how-to determine if your propeller shaft is bent.
For OMC/Volvo Penta, run out needs to be no more than 0.002 or two thousandths. On the dial indicator it is the smallest ticks.
Here is the link to the dial indicator I used (Grizzly T10279 - Flex Arm Dial Indicator Set):
www.grizzly.co...

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@Bierdaddy1 5 месяцев назад

SS is a stronger metal and will transfer the impact forces to the shaft & gears. Aluminum prop will be dented & chewed up, but absorb the impact forces, protecting the shaft & gears. Thanks for showing how to use that tool. I probably need one if buying another used boat. 😆

@robormiston2841 3 года назад

We hit a small tree limb floating at 70 with a stainless outside exhaust Clever prop and it bent the shaft. I was passenger. This was in an old Glasspar. With a 1979 175 Evenrude. With a jack plate and stainless klever prop and chopped top windshield lol. That thing was a chine walker extraordinar. Before we made Hurricane Performance Tunnel Boats. The old days make me smile. Unlike the new days!

@shaneevans7504 4 года назад

Would love to see the video on removing the shaft. Can't seem to find it. Found the the assembly, and carrier removal, but no shaft removal. Thanks for these videos man.

@michaelromer2016 4 года назад

Search for this in my channel: Propeller Shaft Assembly Part 1 - OMC Cobra - Evinrude - Johnson - Volvo

@hershcreative9367 3 года назад

Agree, I can't seem to find any video on actual prop shaft removal? And what are your thoughts on "bending" them back on the boat with a jack like I've seen some do?

@mehagel65 4 года назад

I like that dial indicator, thanks Mike.

@michaelromer2016 4 года назад

Thanks! I got a new video on trailer wheel bearings, then we’ll get back into the fun stuff. I should have it posted today.

@LivetofishOutboardRepair 3 года назад

What is considered out of spec?

@UptownFights 20 дней назад

Mines not bent, but it has a tiny bit of play. What's wrong? The bearings is not tighting enough against the outershaft? My seal was pressured tested, but after picking up the drive by the shaft, a little mistake, I got a little gear oil seepage. Also if I pull the shaft It comes forward like 1/8th inch. Is this normal?

@UptownFights 20 дней назад

ru-vid.comiFtB7FJMQKs?si=0B4VbENNNB5qRVH8