Тёмный

Omni ESK8 GEAR DRIVE! Convert To Gear Drive, With Tons Of Versatility! 

Vapor Trail Channel
Подписаться 159 тыс.
Просмотров 3,9 тыс.
50% 1

Gear Drives are showing up more and more in the ESK8 world, and Omni has one that is super versatile...able to swap wheel types easily, easy enough to install, and robust to use. Let's check em out!
Here's a link to the official install video on RU-vid: bit.ly/3Xs64lM
Interested in Omni ESK8 parts, and this gear drive? Use the link below, and my code: "VAPORTRAIL" for an extra 5% off:
bit.ly/40TFxkg
Don't forget you can hit that THANKS button below the video to support the channel!
For the Le Knight ESK8 gloves (check out the video on my channel), use code XTONY for an extra 5% off on the site: bit.ly/3iHiCYd
Interested in the NYX Z1 or the other Acedeck boards? Use code TonyB for $30 off on the site:
bit.ly/3fCW88U
If you're interested in the helmet or the leg protection I wear, you can click the link below. Code TonyB will get you and extra 5% off:
bit.ly/3GAMco6
If you're in the market for killer lights for your bike, or other activities (estate, helmet, backpack...anything!), check out ShredLights here (Use my code for 10% off: TONYB10):
shredlights.com?aff=273
RiderBag is a great backpack for high visibility and functionality for riders! Code "TonyB" will get you a 12% discount (should show up automatically if you use my link below, or use the code if it doesn't). You can find more info here:
bit.ly/3JUoBkn
If you're interested in airless rubber AT wheels, or the other cool stuff Shaboardz has in store for you, check em out here: bit.ly/ShabWheelsAT
Check out the Meepo Hurricane, and the other boards / accessories they offer. It is an affiliate link, and a small percentage of purchases will go to support this channel, but you won't pay any extra, plus code: TB10 will get you a little discount:
Meepo Hurricane
bit.ly/3FhsRr8
Interested in the Exway Atlas Carbon 4wd? Find out more, and use code TonyBP for a discount on any Exway product on the site here: bit.ly/3xovrtu
Check out the MAXFIND FF Belt and their other boards here, and use code: TONYB for a small discount on the site: www.maxfind.com?sca_ref=2335303.5CR2D7Wioa
If you'd like to send a tip to help support the costs associated with this channel, please use my PayPal link: www.PayPal.Me/tonybrittan
Many thanks for watching the channel! I'm very humbled by your support over the years, and I hope you enjoy the addition of this content to the channel. Growth is always good!
Social Media Links:
/ vaportrailchannel
/ vaportrailchannel
/ vaportrailch

Опубликовано:

 

30 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 40   
@omniesk8
@omniesk8 Год назад
Thanks for the impressive review, bro! Omni will spare no effort to offer more and more new product in near future, like esc and battery, to diversify our product line. In regards to the pulley you mentioned in 13:16, its for CNC hub, which can be used for belt-driven board. No matter belt drive or gear drive, our hub will make it compatible.
@VaporTrailChannel
@VaporTrailChannel Год назад
OH! That makes complete sense. I’ll add that in the description. Thank you for the kind words, and information 💯 Keep the great products coming.
@eBoard3R
@eBoard3R Год назад
⚡🤙🏼 *The year of Gear Drive* 🤙🏼⚡ Nice to see them goin a bit more mainstream
@VaporTrailChannel
@VaporTrailChannel Год назад
Yea, I'm so stoked to see where it's already gotten, and where it will all go in the future! Thanks for watching! 😃👍🏻
@puluzusa467
@puluzusa467 Год назад
finally there is a youtuber showing how to instal. looks not hard. very cool video!
@VaporTrailChannel
@VaporTrailChannel Год назад
Thank you! Yea, it wasn’t hard after I figured out the motor pulley thing. It was funny though…I had to kinda figure out how I was going to film and edit that, so it was a good challenge all around. Thanks for watching! 😃👍🏻
@ALTRON3
@ALTRON3 Год назад
Ive been looking at this gear drive for my hadean for a while now very informative video.
@VaporTrailChannel
@VaporTrailChannel Год назад
Awesome! Thanks for watching 💯
@FC87
@FC87 Год назад
Congratulations you nailed with this example. The first board i thought to install this gear drive kit was trx the second verreal rs of course the most affordable ones. I guess if i have the budget i would go straight with eovan silo but as you mentioned even with that in mind i wouldnt get the flexiblity street wheeels. I love st. Thanks for the video keep it coming!!
@VaporTrailChannel
@VaporTrailChannel Год назад
Awesome! Thank you so much for watching and the feedback 💯⚡️🛹⚡️
@jetman258
@jetman258 Год назад
That direct drive is Nice, cool build.
@VaporTrailChannel
@VaporTrailChannel Год назад
Thank you! Love this stuff. Thanks for watching! 😃👍🏻
@Rays-jk2yn
@Rays-jk2yn Год назад
13:22 Those are 55T pulleys for converting to belt drive with these hubs. 😉 It'll be great to see you put those on with pneumatic wheels. Cool stuff, cool video!
@VaporTrailChannel
@VaporTrailChannel Год назад
That makes complete sense! Yea, I’m gonna play around with the hubs / wheels and do some follow up. Thank you for watching! 💯
@one_point21_gigawatts
@one_point21_gigawatts Год назад
I have a Hurricane with meepo gear drive and now, I can never go back to belts. I'm getting an Omni drive for my Mboard....Great video!
@VaporTrailChannel
@VaporTrailChannel Год назад
Thank you so much! Yea, gear drive is super nice, and with these, you can swap to a lot of different wheels. Thanks for watching! 😃👍🏻
@alejandroWar23
@alejandroWar23 9 месяцев назад
Omni didnt send me a puller. It was the biggest pain in the ass to biy diffrent ones and try to get it off. YOU NEED THE PULLER
@VaporTrailChannel
@VaporTrailChannel 9 месяцев назад
Oh man! I would’ve definitely told them they needed to send you one. Although this one isn’t the best quality, and you probably found a better option to buy? Thanks for watching! 😃👍🏻
@shonuff4962
@shonuff4962 Год назад
Ive got those 145mm airless rubber wheels from omni. First of all they are fantastic! Ive tried a few other brands airless at wheels 150mm and they all are pretty terrible. These omni ones are almost like riding pneumies. They grip the road and even light off road. Ive got them on my emtb with matrix 2"s, and hearo deck. There is one catch though, they do not fit mbs hubs. It says it does in the description but these wheels are lowish profile and wide. The hubs wont close. However, they will fit regular evolve hubs. Overall these are absolutely badass and well worth the low price omni is selling them for
@VaporTrailChannel
@VaporTrailChannel Год назад
Yea, I’m gonna get those wheels
@braidens.4402
@braidens.4402 7 месяцев назад
i like my belt driven zealot but im thinking of upgrading more of the parts like my hubs motors
@VaporTrailChannel
@VaporTrailChannel 7 месяцев назад
Nice! Yea, it's fun to get deep into it. Thanks for watching! 😃👍🏻
@UnchartedWorlds
@UnchartedWorlds 5 дней назад
Hi what was the original board? Was it belt drive? It's no problem to pop in gear drive and it will just work? No problems with esc and existing battery? Or is this approach more for someone doing everything from scratch?? Thanks in advance 🥰
@VaporTrailChannel
@VaporTrailChannel 5 дней назад
Yea, it was a belt drive. Took those off, installed these, and was ready to roll! It was my first time doing anything like this, but I watched their install video and worked it out. I do offer tips in here in some things that were tough. No adjusting the ESC and battery was good too. Hope that helps. Thanks for watching! 😃👍🏻
@ikuona
@ikuona Год назад
No constant backlash adjustment like Trampa gears?!
@VaporTrailChannel
@VaporTrailChannel Год назад
None at all with these! Sorry for the delayed response. Just seeing these comments. Thanks for watching! 😃👍🏻
@stephanpieterse6960
@stephanpieterse6960 6 месяцев назад
Will these fit the Tynee Mini 3 Pro?
@VaporTrailChannel
@VaporTrailChannel 6 месяцев назад
That's a good question, and one I can't answer, because I don't have the Tynee Mini 3 Pro mostly. Do those motors sit under the board or behind it? If behind it, I'm sure they would. If under, I'm not quite sure. You might contact them through their site and ask...they're very responsive. Thanks for watching! 😃👍🏻
@stephanpieterse6960
@stephanpieterse6960 6 месяцев назад
@@VaporTrailChannel We may see a gear drive conversion kit from Omni compatible with the Tynee Mini 3 Pro in June 2024 (For the record: The motors sit under the board)
@VaporTrailChannel
@VaporTrailChannel 5 месяцев назад
@@stephanpieterse6960 That would be quite cool! Thanks for watching! 😃👍🏻
@donnapershall2673
@donnapershall2673 Год назад
Would you be willing to make separate channels for this and vaportrail?
@VaporTrailChannel
@VaporTrailChannel Год назад
Vapor Trail Channel is where I share my passions. There are do differentiations for me. It’s simple…if you don’t like a particular video I publish, just watch what you want to watch. There’s so little coming out in the v@p3 world these days, and I’ve spent a lot of time, money, and dedication to my channel, so I don’t want to watch all of that fade away. I decided when I launched the channel that I would name it after the Rush album, Vapor Trails, so that it’s not specific to one genre and I could share everything here. The latter was so pervasive at one time that there wasn’t time for other content. Now there is, and I’m stoked to expand it. I very much appreciate your support here! And hope that you’ll understand and continue to do so. Thanks for watching! 😃👍🏻
@syluxv2398
@syluxv2398 Год назад
I'd pay some pretty good coin if we can get a variation that matches the anodization of the Zeus Pro
@VaporTrailChannel
@VaporTrailChannel Год назад
That would be cool
@KudaBear-gj9br
@KudaBear-gj9br 8 месяцев назад
No reason to buy their overpriced crap when you get a similar or better board from Acedeck for much less, already assembled.
@VaporTrailChannel
@VaporTrailChannel 7 месяцев назад
I will say that Acedeck makes some really nice products! That's for sure. I bought the NYX Z1 and absolutely love it. These gear drives came out when nobody had them available for purchase...well, aside from a few expensive boutique drives. I can tell you that Omni makes very nice and great quality DIY parts, and they've just released a section where you can spec out and order a custom board to be built by them. And the price is very competitive with Acedeck. I get it man...there are some really nice production boards out there these days and Acedeck is at the top of that game IMHO. But, there are many who choose to DIY...or just want to change up their current board without spending over $1k for a new board. I'm happy that there are choices out there for everyone, and I'm here to show you what they look and perform like IRL. That way you can others can decide for yourselves if the items I show are for you. I'm sorta sad to see negativity in this community, as it's what brings me joy. Kinda like therapy. But I do appreciate your feedback! Thanks for watching! 😃👍🏻
@KudaBear-gj9br
@KudaBear-gj9br 7 месяцев назад
Please name one DIY place that can make the entire board as nice as an Ares X1 2023 for 1600 dollars. If that exists, I'll DIY lol. As far as I've seen, DIY always costs more, and you end up with an inferior product. I get doing it for the joy of it though. That makes sense. @@VaporTrailChannel
@jaceycraig
@jaceycraig 11 месяцев назад
They didn't send me a gear puller. I was wondering why the gear didn't come off after drilling out the set screw🥲
@VaporTrailChannel
@VaporTrailChannel 11 месяцев назад
Yea, that’s a pretty important part
Далее
PULLY TALK
11:00
Просмотров 8 тыс.
Как выжить на 1000 рублей?
13:01
Просмотров 698 тыс.
Meepo Hurricane | Gear drive installation
18:56
OMNI GEAR DRIVE REVIEW
8:27
Просмотров 5 тыс.
Gearless Magnet Bike
17:57
Просмотров 6 млн
INSANE torque, INSANE speed - 4WD Esk8!
15:40
Просмотров 30 тыс.
If your electric skateboard uses belt drive...
11:06
Просмотров 88 тыс.
Future of Esk8 Won't Be The Same After THIS!!
10:09
Просмотров 4 тыс.
Как выжить на 1000 рублей?
13:01
Просмотров 698 тыс.