One issue with the Beretta A300 Ultima Patrol (That's easily resolved)...

Подписаться 57 тыс.

Просмотров 34 тыс.

50% 1

Thanks for watching my update video on the Beretta A300 Patrol
Email me: thecalibercorner@gmail.com
Follow me at... Guntube.org: travisp11
Gunstreamer: travisp11
UGEtube: travisp11
Facebook: travisp11
Twitter: @travisp11onyt
Instagram: travisp11onyt
Support me on Patreon...www.patreon.com/travisp11
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including RU-vid) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above. Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including RU-vid) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately.
By viewing or flagging this video you are acknowledging the above and finally, you are watching these podcasts with views/opinions and/or language that you may find offensive and/or may disagree with. You are watching this podcast and/or video of your own consent and at your own risk.

Развлечения

Опубликовано:

7 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 248

@mcgush8427 Год назад

Does no one know you can take a 6mm Allen key and back the QD cup out a few threads? One and a half turns and all QD swivels work.

@travisp11 Год назад

Ahh. I honestly didn’t know that as this is the first firearm that I have run into a situation where the QD mount was not above the mounting surface. I just assumed the mount was molded into the stock and was part of it.

@TheGoshzilla Год назад

Or you can use a T40 hex bit. Unscrew it add blue locite reinstall and adjust.

@JackedLobster 3 месяца назад

I figured I’d better check the comments before I left a similar one. Simple fix if you like the orientation of that socket, but I put one on the right side of the stock because I didn’t like how that bottom mounted one made the shotgun hang.

@f34dave Месяц назад

Yup. Another method is to grind down the tip of the swivel, reducing the length by a fraction, so it sets deeper in the "cup" and it worked great too.

@kevinjung5539 Год назад

Come on Beretta... That's an easy thing to work out in the factory. Valid complaint brother! Glad you were able to fix it without having to carve on your new tool.

@travisp11 Год назад

Thanks for watching!!

@timothyg.4719 Год назад

Same issue with my A300 ULTIMA. The exact same shotgun you have there. The QD receiver unscrews. Just back it out or unscrew the receiver a little and any QD will go in and stay in just fine. DO NOT FILE OR DRIMMEL YOUR EXPENSIVE SHOT GUN PEOPLE!! 😎👍🏾

@travisp11 Год назад

Yup, a few others have made that suggestion. It’s crazy that Beretta told Pew Pew Tactical to dremel the excess plastic off!

@evotunedscc Год назад

@@travisp11 Who at Beretta told them this?

@travisp11 Год назад

@@evotunedscc They reached out to them with whatever connection they have. If you watch their review of the gun they mention it, or it was on their eval online, I saw it on one of two sources.

@ChrisFromThe740 Год назад

That is unfortunate but I'm glad you didn't have to cut into the stock. This is some great info for people who are buying this shotgun

@travisp11 Год назад

Thanks man! It’s not an issue just limited to me so I just thought others should keep an eye out.

@stronglikebull2994 Год назад

Thanks man! It's nice to have people post these videos to save the rest of us some grief. Bought a set of the Blue Force and then bought 3 more. Great stuff! Sweet gun. Got mine in Tiger too!🐯

@travisp11 Год назад

Right on man! It is a great shotgun and the BFG sling swivels are awesome!

@stronglikebull2994 Год назад

@travisp11 Burris Fastfire IV with the shroud is great on this too!

@travisp11 Год назад

@@stronglikebull2994 I need to get an optic on this one! I will check it out!

@Isleofchocolope0U812 Год назад

I have this gun as well. Hadn’t gotten to the point of putting a sling on it yet. Thanks so much for finding a solution to this issue.

@travisp11 Год назад

Looks like you can also use an Allen key to back out the rear mount point.

@thewisehortsman2837 Год назад

Thanks for sharing! Just picked up my gun yesterday. I’ll order a set now 🙏

@travisp11 Год назад

Sounds good!

@killjoyken Год назад

Just got mine a month ago and didn't have this issue so I'm pretty sure Beretta has addressed the problem. The placement is fine for a hunting shotgun, but not for a "tactical" shotgun. I added a flush mount QD on the side where it belongs.

@travisp11 Год назад

That is a solid idea.

@bobbyb7127 10 месяцев назад

Where on the side? Just ordered mine today on no tax weekend:) oh I'll figure it out lol

@ryanthelion408 Год назад

That stock design is awesome

@fredowen64 Год назад

Good commentary...I used a 90 deg. Countersink 1/2 dia. On a variable speed pistol drill. Low rpm. Just enough to take the ridge off.

@travisp11 Год назад

I just about used this as an excuse to get a new dremel but decided on the new swivels instead. If I would have bought the all back version I would have probably just ground down the excess.

@Greg-or7wy 10 дней назад

The Magpul sling swivel works just fine on the buttstock

@j.dieason7527 7 месяцев назад

Appreciate the vid my man!!

@travisp11 7 месяцев назад

Thanks for watching!

@r.s.z.1151 Год назад

Yup . Blue force works on mine as well .

@kensai1968 Год назад

Thank you. Big help!!

@travisp11 Год назад

Glad to help!

@andrewbayuk4856 Год назад

Awesome I’ve been trying to figure out a solution for a long time!

@TheNewps Год назад

I run the Blue Force Gear slings as well. Slapped one on the A300 Patrol I picked up a few days ago and it worked fine. Didn't know this was an issue.

@travisp11 Год назад

Yeah. I read it on the Pew Pew Tactical article that they had issues with their swivels.

@bobtrautz5554 Год назад

Thanks, I am having the same issue with my A300 😊

@wizard7206 8 месяцев назад

Thanks 🙏🏻

@travisp11 8 месяцев назад

Thanks for watching!

@FirstLineDefense Год назад

I just picked one up. Honestly I plan on attaching a QD to the side of the stock like I did my 1301.

@DVLDOC8404 Год назад

Thanks for this video! Subscribed.

@travisp11 Год назад

Welcome to the channel!

@Arshin53 Год назад

mine was popping out from stock and c clamp. My fix was pretty easy lol just worked in in and out with a little extra force and they work as intended now :D

@fluffy10mmjeepguy92 Год назад

Thank You sir I will be ordering these for mine.

@travisp11 Год назад

Right on! You should be good to go! They are well made sling swivels!

@RobertCandito-sy6uq Год назад

Good information, I would have to go with the locking QDs as a twisted sling each time it’s taken on and off would drive me crazy.

@travisp11 Год назад

I agree!

@davyjones674 Год назад

Sorry for your troubles Travis. Still Mossberg 940 pro tactical gang here.

@travisp11 Год назад

Hey man, she also had my attention.

@tedmixos3370 Год назад

FWIW the mounts that came with my s&w 15-22 work great in the rear with no issues they are a tiny bit longer

@timr3191 Год назад

Just bought one today …ty brother …

@travisp11 Год назад

Right on! If you haven’t seen it yet, check out my cleaning video on it

@blackflag_fishing Год назад

I had the same issue, I tried 3 different qd loops and 1 of them worked. It didn’t seem to be the plastic, it actually seemed to be the quality of the qd port on the stock.

@travisp11 Год назад

Try the ones that I got and you should be set. For me it was all about the swivels diameter

@caution_xray Год назад

👊🏽 thanks

@travisp11 Год назад

No problem 👍

@bolseg1 15 дней назад

thank you, that solve mine..

@travisp11 14 дней назад

Glad to help!

@DownRange556 Год назад

I think the a300 is sexier than the 1301. Also that tiger stripe finish is just 🔥

@travisp11 Год назад

I love it!

@inurfaceson9722 2 дня назад

Thankyou

@travisp11 2 дня назад

@@inurfaceson9722 thanks for watching!

@smoothoperator137 Год назад

I too have this shotgun. And I also run the blue force with it with no issues. Unfortunate about the other slings. But I really like my blue force slings.

@travisp11 Год назад

They do look pretty good. I probably would have bought the Blue Force sling if I hadn’t bought my Magpul sling first.

@smoothoperator137 Год назад

@@travisp11 I had already had a magpul first and liked it on an AR. But I think blue force is a lot more user friendly ergonomic wise.

@travisp11 Год назад

@@smoothoperator137 it definitely won’t accidentally pop out. The smaller diameter helps, too.

@AgentZero0982 9 месяцев назад

which blue force sling are you running and did you buy the separate mounts or no?

@sworks7124 Год назад

Just unscrew the QD mount from the stock 1/4 turn with a allen wrench and it will connect fine.

@travisp11 Год назад

This is good to know! I looked down into the socket but didn't notice that there may be an allen head screw keeping it in place.

@bobroberts7661 Год назад

Best answer. Life doesn't have to be complicated.

@evotunedscc Год назад

EASY FIX: The QD cup has an allen wrench socket because of the way it installs into the stock -- use a hex key / allen key wrench to unscrew the QD cup by one turn. The QD cup will back out from the stock and the QD slings will engage. The QD cup installed to this original depth allows the cover to fit flush with the stock and mitigate snagging. There is definitely no need to remove stock material using a rotary cutter/grinder -- please don't suggest this.

@CrimtideStreams Год назад

Tried this.. doesn't work with Magpul QD mounts. New ones with side buttons or the old ones with a center press button. Also nothing fits in the front QD mounts at all. All 3 mounting points the swivels come right out.

@travisp11 Год назад

Try the Blue Force Gear swivels. They have a narrower diameter case so they rest right on top of the QD mount. That’s what I needed.

@evotunedscc Год назад

@@CrimtideStreams Try to back the QD cup out 2 or 3 turns. There's plenty of thread engagement.

@btomayko82 Год назад

I did this and it worked with UTG QD sling swivels perfectly.

@travisp11 Год назад

@@btomayko82 This is good to know!

@squiblift2019 Год назад

Your complaint as a customer is valid in my opinion.

@travisp11 Год назад

Thanks! I wasn’t trying to be click batey I just figured for a gun with some sort of “duty” title applied to it that it would accept something as simple as a sling with no complaints, especially considering the swivels that I chose which were made to fit QD dimensions.

@motorcitymadman146 2 месяца назад

So also heard the plastic QD mount up front move when the gun barrel gets hot. Probably end up with Mlock mouth on the forend.

@wtffrank Год назад

GroveTec invented the QD and they're also in spec

@tobization Год назад

I had the exact same issue on my A300 Patrol as well. I carefully shaved a hair off in front of and behind the mount with a razor knife and a regular QD mount works perfectly. That said, I also installed a Grovtec QD mount on the side of the stock, up high on the right side so that it will hang right when using a 2 point sling. It was simple to drill the stock and put the fitting in place. Beretta should be on top of this...pronto.

@travisp11 Год назад

I agree. A few peopel suggested using an Allen key to back the mount out a tiny bit. I haven't tried it yet but that may work.

@evotunedscc Год назад

@@travisp11 it will work. Customers shouldn't be shaving their stocks.

@bthemedia Год назад

How did you reveal the stock QD mount… drill out the plastic cap?

@evotunedscc Год назад

@bwvids there is a rubber cover. Use your fingers or a pair of pliers to remove it.

@travisp11 Год назад

@@evotunedscc I know. Like an ape I sat there thinking, did they make it without mounts? I don't get the point. Would would think that a product marketed to the LEO market it would have all tactical mounting points at the ready right out of the box.

@slimdog7088 Год назад

The Patrol I just bought takes my QD (magpul), and it appears that maybe they fixed the issue now. Good info nonetheless.

@travisp11 Год назад

Good deal! Hopefully they got enough calls to customer service to get it right!

@DLR2234 Год назад

You can just take an Allen key and stick it into the socket to loosen it up and they will all fit.

@travisp11 Год назад

Yup yet so many other channels that reviewed this gun before me never mentioned that. I’m gonna whine and complain here but I honestly feel like it should have been set to the proper depth from the factory instead of resting under the plastic mold.

@ctrusfive5268 Год назад

P.S I paid $535 for the Mossberg 930 JM Pro tactical with Kryptec Typhoon 10 plus 1 capacity, $49 for SBE precision modified gas piston, and another $60 for Or3gun multi use spacer tube. Well under the $1200 plus maroon initially asked for the Jm pro 940.

@ctrusfive5268 Год назад

Maroon= MSRP auto fill Lol😂

@stewartwhite3165 7 месяцев назад

Great fix tho the QD can be backed out without filing, shaving the stock. Allen head wrench will fix the problem. Also, $1100 too much to pay for the a300 patrol. Exile Armory in Weaver, AL sells them for $855. Score!

@travisp11 7 месяцев назад

The tiger stripe model has a higher MSRP and was a limited run but yeah, these are way cheaper now and I expected that to happen. Good call on the Allen key use.

@theroadhound Год назад

The BUTTSTOCK qd mount is screwed into the stock, just grab a hex wrench stick it inside the qd slot and give it a quarter to half turn counterclockwise and the whole "PROBLEM" is solved

@travisp11 Год назад

That is one option. Funny that Beretta didn’t tell the larger RU-vid channels it’s all that was necessary.

@OldVetUSN72 Год назад

This is a minor issue ! For the money it’s one of the better tactical/home defense shotguns out there, and I own Benelli’s also! The 300 patrol eats up anything I feed it. New Benelli M4’s in $2400 range now !

@travisp11 Год назад

I love my A300 Patrol and my video was more of a heads up for new owners of the gun as I saw several larger gun channels that had the same issue as me.

@OldVetUSN72 Год назад

@@travisp11 👍

@boss350z5 Год назад

File the swing swivel to remove a few thousands of material, dont mar up the stock it's self if you aren't using the Blue Force swivels...

@dantheman1396 Год назад

I was considering the blue force or the magpul qd points, I guess I know what my decision will be.

@travisp11 Год назад

There ya go.

@georgewilliams385 Год назад

I am having the opposite problem. The rear QD attachment is solid. The front QD attachment is not secure. I bought a OD mount for MLOK from GG&G to attach to the fore end.

@travisp11 Год назад

It’s a pain these weren’t built to a consistent standard or at a minimum include the swivels or recommend a brand we should buy that would fit.

@HardEarnedBacon Год назад

Agreed, ridiculous issue for this gun to have. Guess I'm buying brand new Blue Force swivels to replace my brand new QDM swivels 🙄

@travisp11 Год назад

Try what you have (or return them if you haven't opened them.) You can use whatever you want on the front one. And don't forget, this problem may not be present on all of em but I would love to hear if yours has the same issus as mine.

@HardEarnedBacon Год назад

@@travisp11 mine is actually the opposite, the sling works in the buttstock but not the front.

@travisp11 Год назад

@@HardEarnedBacon Dang!

@pacifist_productions Год назад

For $40 they should offer a Tiger stripe option as well. Do they make a Tiger stripe sling I wonder 🤔

@travisp11 Год назад

I may be able to find one but with this being a limited run, it’s hard to say

@gbennett2889 Год назад

The three QD sockets on my A300 are non functional with Magpul or Grovtech QD swivels. I’ll have to get some blueforce gear swivels.

@travisp11 Год назад

Some people recommend backing out the stock QD mount with an Allen key so that may help but if the mag tube QD mag doesn’t work with the swivels the BlueForce ones may work.

@jameshovey8301 Год назад

There has actually also been issues with the front swivel mount. The clamp seems cheap for a $1000 gun and seems to want to move around and Mar the finish, despite being tightened down before use.

@travisp11 Год назад

I’m gonna try mine with loctite. We need a nice aftermarket locking/steel version.

@jf7393 Год назад

@travisp11 the issue I had was not solvable with loctite unfortunately. Seems it's about the amount of clamping force that you can exert with the small screws. Just can't get enough bite on mine. Some people don't have this issue.

@travisp11 Год назад

@@jf7393 possibly put a thin piece of foam around the tube and then clamp it on? It’s a crappy design that needs some sort of positive locking on the barrel or mag tube.

@jf7393 Год назад

@@travisp11 yeah I mickey moused it already. I put a good amount of some high temp paint on the clamp itself and then cranked it on there while it was still wet. It's essentially painted together which is bogus but so far that seems to have done the trick. I didn't want to put anything in there that could get scorched or break down. Not my favorite way to fix an expensive shotgun even though it's mostly thought of as a "cheap" 1301. It's annoying to me how hyped the beretta autos are because it seems like they're establishing wide variation in QC if you dig a little deeper. The gun is starting to feel overpriced to me in some ways

@travisp11 Год назад

@@jf7393 it is and a bit of the premium you are paying is that LEO/Military intention that this shotgun is marketed towards where all things “tactical” demand a premium. I also have a Daniel Defense DDM4A1 that I paid $1600 for. Now they go for over $2K. Is it 3 times better than my PSA carbine with the FN CHF barrel…maybe not but the military pedigree of the DD keeps that price high.

@weablewabble Год назад

Wanted: Heat Shield for Beretta A300

@neiljonielunas5069 9 месяцев назад

Using Magpul sling swivels. I had to turn the rear socket out about a 1/8” turn to get the swivel to lock. The front was worse. I had to grind about 15 thousand of the face to get it secure. Shouldn’t have to do this.

@travisp11 9 месяцев назад

I ended up changing out my mag tube and clamp with an aftermarket part from GG & G. I added an MLOK sling mount of the front and she is good. The blue force gear sling worked just fine on the back and the front the front plastic stock mag tube and clamp kept moving.

@Ceej3 Год назад

Blue force gear qds work fine

@travisp11 Год назад

Yup!

@floydblack7115 Год назад

Love it

@kylewallace4318 9 месяцев назад

Just bought a Patrol without this issue. Beretta must’ve fixed it.

@travisp11 9 месяцев назад

Good!

@Nuck-Fo0bZz 4 месяца назад

I have the reverse problem. My front qd doesn't work but my rear does. Unfortunately there's nothing to really adjust or back out. Also none of the qd points on the ultima are captive. They're all 360 free swivel. Guess I'll have to spend another $100 on the GG&G replacement for the front qd mounts.

@travisp11 4 месяца назад

Have you tried a Magpul M Lok QD mount yet? You could put that on the handguard.

@pward5499 Год назад

What sling do you like? If you buy a Blue Force Vickers Sling, will the QD swivels it comes with work without the issue you solved?

@travisp11 Год назад

I honestly don’t know what swivels come with it. If the online listing doesn’t say you will need to call BlueForce to ask. I bought a basic Magpul sling.

@Subdood04 3 месяца назад

I was lucky. Didn’t have that issue with mine.

@travisp11 3 месяца назад

Good!

@ronin11624 Год назад

I did buy the blue force gear QD sling swivel, but it kept popping out like all the others. I have the tiger stripe finish and I really didn’t want to grind up that pretty paint job. So I got to thinking is there a way to push the QD socket out more? I took a closer look and there was, if you take an Allen wrench you unscrew it a little bit so it will seat in there. It also seem to work best using a magpul QD sling swivel.

@travisp11 Год назад

This is good to know. They must really be seating these mounts deep into the stock. I didn’t wanna back mine out because I wasn’t sure if it would loosen it.

@ronin11624 Год назад

There’s plenty of threading so you don’t have to worry about backing it out too much. Next time you have it out of your safe pop at the swing swivel and have a look.

@travisp11 Год назад

@@ronin11624 will do! The Blue Force Gear swivels will stay but a lot of people love their Magpul. I do know some folks have had issues with the front mount and certain swivels not staying.

@wanderfwd Год назад

One of the threads on the barrel clamp came out, contacted Beretta and they couldn't help me due to not having the part since its a new shotgun. The barrel clamp is pretty trash not going to lie..but it sucks that it failed before I even shot it.

@travisp11 Год назад

Im waiting for a steel aftermarket replacement.

@tonybroussard1080 22 дня назад

Just back it out with an Allen key holy shit lol

@travisp11 21 день назад

What’s funny is at the time I never thought to do that and two of the huge RU-vid channels that features this gun also saw that they had the same problem as me

@VNXTY Год назад

I got mine yesterday. I noticed on the stock near the butt pad that the material has a bit of give to it. It seems like the fit could be a bit better right in the middle near the butt pad. Is it the same on your gun would you say?

@travisp11 Год назад

Try tightening the butt pad screws. Mine needs a bit of adhesive towards the bottom of the butt pad

@bthemedia Год назад

How do you get the plastic plug out for the QD mount on the stock? Pry it out or drill it out?

@bobbyb7127 5 месяцев назад

I had the same problem. Screwed up the mount some before I decovered it's just a rubber plug. Stick knife in the middle and it'll come straight out. Lol

@TheLoneRanger745 6 месяцев назад

Use the correct Allen wrench and backout the QD socket about 1/4 of a turn , check for proper function.

@travisp11 6 месяцев назад

Yup. Didn’t know that at the time

@martinsimandl2814 11 месяцев назад

Back out with allen wrench, no carving

@travisp11 11 месяцев назад

Yup. Didn't realize that at the time.

@ronniepayne378 Год назад

Hey Travis, I bought this shotgun. My question to you is, did you remove the rubber plug in the stock and put in the QD mount? Beretta told me to leave the plug in, with that there is no way to us a QD. Thanks in advance for your input.

@travisp11 Год назад

Pop the plug out and you will have QD mount access.

@jamesmac4447 Год назад

For 1100 it should come with it ! Period

@travisp11 Год назад

I agree.

@mike-le2xp 10 месяцев назад

Don't cut it! There's an Allen inside. Just give it a half turn to the left

@travisp11 10 месяцев назад

Yup. Something I didn’t discover till after I made this video.

@vktravellog1242 7 месяцев назад

I agree its idiotic for berreta to have the QD on the front and not in the back. I just talked to the store I bought this today and we were both like this is so freaking lame! Everyone should file a complaint. Either do it all the way or dont do it at all 🤬🤬🤬🤬🤬. Italians must have had too much wine when they decided on this stupidity

@travisp11 7 месяцев назад

I agree but look at the ergos of their cars, same idea.

@ctrusfive5268 Год назад

How many rounds can you go in between cleanings before you have issues? I thought I heard one reviewer mention the owners manual say 200. Is that true? Because after I 940ed my Mossberg 930 with legit the exact aftermarket parts from SBE Precision and ORG3gun mine can go 2000 plus rounds as opposed to original 350 rounds in between cleaning. Please let me know because I was on the fence on the A300 ultima or the 1301

@travisp11 Год назад

James Reeves over on TFB TV did 500 rounds with no problems. The manual says if you shoot all lead you should clean it after 200, I only did about 50 in my range test and it wasnt very dirty when I took it apart to clean it.

@normrubio Год назад

Premium shotgun, premium accessories.

@travisp11 Год назад

Yeah but you would expect a QD mount to be built to a common standard.

@BigSway22 Год назад

I grabbed one as recent as 2 weeks ago and didn’t have this problem

@nickprague1481 4 месяца назад

An $1100.00 should also come with a printed manual.

@travisp11 4 месяца назад

I agree. The manual is a generic A300 manual, too with a section dedicated to the Patrol which makes it a bit confusing.

@transition0071-mx2me 4 месяца назад

Hi, What sling do you recommend for this shotgun?

@travisp11 4 месяца назад

Blue force gear or Magpul

@z33guru 9 месяцев назад

Well mine in the stock works great but neither of the ones on that front clamp will hold properly. Annoying. Gonna see if I can get Beretta to send me a new clamp.

@travisp11 9 месяцев назад

I definitely would too!

@desmurphy1431 Год назад

Can the a300 patrol handguard/forearm grip be switched over to fit on the 1301

@travisp11 Год назад

I believe so and vice versa. If you can try to get one from somebody before you buy it but I believe that James Reeves over at TFB TV confirmed it.

@86keen Год назад

Just picked up the a300 patrol. Are the iron sights adjustable

@travisp11 Год назад

Nope. They are fixed.

@chiward Год назад

I was having the same issue but for some reason I was able to just rotate the mounts & they locked in place. 🤷🏾‍♂️ maybe I just got lucky

@travisp11 Год назад

It’s because the plastic is higher on the front and back than the sides. So that may explain why rotation works for you

@beamerboy9510 Год назад

Recently purchased this fire arm when trying to load the firearms I can only get 6 2.75 slugs in the 7th won’t go in all the way any advice

@travisp11 Год назад

It may be the crimping on the shotshells that is causing the issue. Have you tried loading 7 rounds of regular shot to see if they will go? I've heard that some european shotshells have a different type of fold/crimp on the shotshell that takes up extra space that USA sourced shotshells dont and when you multiply that extra amount of space x rounds, that eats up space for round #7

@beamerboy9510 Год назад

@@travisp11 thanks for the info they are fiocchi slugs and there is some extra material on the end

@DISABLED12-7 10 месяцев назад

I have a really dumb question I can't find an answer to. Can I get a longer 28" barrel for an Ultima Patrol for skeet/trap? I'd like to be able to swap barrels for different roles.

@travisp11 10 месяцев назад

I’m gonna say “no” and my guess is that the gas system is technically different between the patrol and non patrol Ultima shotguns. The gas ports and how the Patrol is tuned is different from non Patrol models. Maybe try a different choke tube like “modified” and see if you can’t hit skeet with it. It may work for recreational play and not serious competition.

@DISABLED12-7 10 месяцев назад

@@travisp11 thank you!

@travisp11 10 месяцев назад

@@DISABLED12-7 you are welcome!

@TheCenturion8404 Год назад

No excess material bro, get an hex wrench and back out the mount

@TheCenturion8404 Год назад

The mount is or swivel cup is adjustable

@travisp11 Год назад

Yup, we know now.

@travisp11 Год назад

@@TheCenturion8404 my recommendation for buying swivels came from other channels that got the shotgun before me. They mentioned having swivel problems and one channel said Beretta told them to remove excess plastic and the other channel recommend the BlueForce gear swivels.

@thefatgymgod2633 3 месяца назад

What size qd mount is it the 1.00 or the 1.25

@travisp11 3 месяца назад

I went 1.25”. That is the width of my sling that I am using.

@Salieri47 Год назад

You said $1,100 for the Beretta shotgun? I'd be on Beretta's a$$ to send me mounts that worked. In this case refund my purchase price for the mounts, or at least send me some freebie useful accessories. In the big picture it's a small oversight; OTOH having your sling actually stay attached to the gun *like it is supposed* is a big deal.

@travisp11 Год назад

I agree.

@coffeeandgunsandammoastron4137 Год назад

Hey. Can you test the rapid fire. I’ve heard the trigger hangs when you rapid fire, where you can outrun the trigger.

@travisp11 Год назад

When I go to the range soon with it I will.

@travisp11 Год назад

I do know that the gun is slower to cycle than the A1301 and have read about trigger issues on Ultima models made in the past.

@coffeeandgunsandammoastron4137 Год назад

@@travisp11 thank you. Looking forward to it.

@travisp11 Год назад

@@coffeeandgunsandammoastron4137 same here!

@Nanster-gv8nf 8 месяцев назад

...or you can back it out a thread or two...

@travisp11 8 месяцев назад

Yup, didn’t know it at the time and neither did anyone else that had the same issue on RU-vid.

@fullachit Год назад

You could just back out the insert about a 1/4 turn. No?

@travisp11 Год назад

Yup. Didn’t know that at that time.

@Kwhite2575 Год назад

Just back it out with an Allen wrench. Problem solved and you don’t have to spend a dime.🤣

@robertscherer6343 9 месяцев назад

I need the link to those QD mounts

@travisp11 9 месяцев назад

Check out BlueForce gear.com

@garylofgren Год назад

Great catch and good advice but why not add the Blue Force Link for all to make it easy to order them …all I say is maybe next time.

@travisp11 Год назад

RU-vid does funny things to your video if you post links to certain manufacturers. I may be able post it as a comment and not in the description box.

@angrychivafan Год назад

Send Beretta this video

@travisp11 Год назад

Im sure they know. Others have called them.

@Asidebar 9 месяцев назад

I bought the A300 for $860

@travisp11 9 месяцев назад

Nice!!

@l.s.451 Год назад

For a $1k you think they would get this right.

@travisp11 Год назад

I agree.

@SHUB281 Год назад

No. You have to spend $1400. 1301. Made in Italy

@evotunedscc Год назад

@@SHUB281 same stock.

@MattH-wg7ou Год назад

You can find a 1301 Tactical for $1400?

@travisp11 Год назад

@@MattH-wg7ou check gun.deals

@chiward Год назад

Anyone here have both an A300 patrol & a 1301 w/ a briley handguard? I wanna know if it will fit on the Patrol since the factory 1301 handguard fits the patrol.

@travisp11 Год назад

It should fit if it’s compatible with the 1301.

@jeffredfearn8276 Год назад

Just purchased the A300 Patrol and the dealer had the briley hand guard mounted on the front. Fit and looks great!

@chiward Год назад

@@njrtech I want the Briley b/c it covers the barrel enough to get a better grip.

@OldVetUSN72 Год назад

That’s one reason I bought the patrol over the 1301! So far it’s great!

@danielbrady3684 2 месяца назад

At the price beretta is selling this gun ,they should do a recall on it .so te owners could get it fixed for free .case closed😂😂😂😂😂😂 in Québec canada the price for this item is $1650 + 15 % tax So baretta fix that problem ASAP !

@CrimtideStreams Год назад

Spending this kind of money on a firearm nobody in the world should have to spend an extra $40-50 on QD swivels because a Magpul swivel won't work..

@travisp11 Год назад

Sounds like I can back out the QD mount a quarter turn and the problem is solved but out of the box that should not be an oversight. They should be properly set.

@CrimtideStreams Год назад

@@travisp11 I had to back mine out about 1/4" before anything seated. Nothing I have will seat if it is in any deeper. I don't understand how Beretta missed this.. at all.. shame on them.

@conradaleshire4428 Год назад

Why not send it back and have them fix it?

@travisp11 Год назад

A few people suggested backing out the QD mount and that is an option but quite a few people have had the same issue as me so who knows is Beretta could fix it.

@bradymcdonald3591 Год назад

Modify the swivel not the gun

@travisp11 Год назад

Didn’t realize at the time you could do it.

@IZZYR23 Год назад

Actually you didn’t need 2 of them one was fine

@travisp11 Год назад

True but I wanted a matching set.

@pimptasticone Год назад

It's a non-issue but I guess you get more views/clicks if you're controversial. 6mm allen wrench, one turn counterclockwise and the QD cup is barely proud to the plastic and works perfectly.

@travisp11 Год назад

When I made this video, one is the other videos that mentioned this issue was Pew Pew Tactical. They were told by Beretta to trim off the excess plastic and not to back out the socket. Over on TFB, James Reeves had mentioned the BlueForce gear swivels worked perfectly so going off those bits of info, I made this video. The other problem I had was several swivels wouldn’t work in the front QD mount so I had no choice but to try a different brand. Last thing, I try to stay away from click batey titles