ONKYO TX-SR606 WONT STAY ON POWERS OFF AFTER A FEW SECONDS - PART 2 REPAIRS

Подписаться 57 тыс.

Просмотров 31 тыс.

50% 1

Here is Part 1, diagnosis • ONKYO TX-SR606 WONT ST...
My customer brought in an Onkyo TX-SR606 AV receiver with the complaint that it shuts off, it wont stay on for more than a few seconds. This is part 2, the extensive (way more than I had planned for) repair
If you would like to support my video efforts please consider making a donation at www.paypal.me/NORCAL715 Remember with your help we can keep these things out of the landfill, out of the recycle bin, and out of the E-waste facility! Thanks for watching.
Thank you to these people that have supported my channel by making a donation or by having me repair your unit.
Tyler Bridge Dena Hamilton Paul Agbuya Samuel & Nancy Guich Dot Morgan Timothy Ritchel William Holloman Cynthia Adams Andrew Oros George Savage Graham Foral Paul Agbuya Scott Kullen (Thank you for monthly support) Philip Brown (Thank you for monthly support) Scott DuVall Christian Brenzel Russell Houtz Philip Brown Michael King Erick Pastor Robert Ettinger Christopher Cicero Heath Lasswell Timothy Ritchel Benjamin Rubio Michael Dukes Dot Morgan Casey Cane Teri DeLeo Kelly Knutson Howard Goble Diana Williams Reed Graham Christopher Wang David Ammerlaan John Johnson Shaheed Amirkhan Brett Sherry Joseph L Ozvold Sweidan Omar John Eggers Linda Kuo Daniel Pyles Melanie Branton Lisa Sklar Barry Marchant John Harper Larry Mcdonald Annette Lewis Howard Goble Hugo Tajimaroa M R Rajesh Dan Latorre Uri Cohen
Follow me on social media
Facebook
Instagram
Twitter
@NORCAL715
email me NORCAL715videos@gmail.com
00:00 Intro/parts have arrived
00:32 Disassembly
02:23 Schematic/parts to be replaced
02:58 Damaged parts
03:09 Testing/matching new parts
04:25 Installing new parts
08:53 Cleaning and ACETONE!
09:46 Bad solder connections
10:17 Resoldering other driver transistors
11:02 ESR capacitor tests
12:09 The gift that keeps on giving PT1
13:34 More parts received
15:23 Idling current adjustment
16:34 Bias test fixture
17:18 Adjusting bias
20:07 Powering without system control
20:41 The gift that keeps on giving PT2
21:48 Surround right channel audio test
23:32 Main channel tests and final thoughts

Наука

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 140

@mikeunivers 3 года назад

I don't know why but this is the kind of video that I enjoy the most

@davesiva4524 6 месяцев назад

Well done sir , i love watching your repairs

@nozynoz 3 года назад

Totally awsome, it kept on giving.

@zs1dfr 2 года назад

Very well done, and nicely described! Thank you for an excellent repair video. I have a tx-sr607, which had only the display resistor problem. I was able to fix it myself... I learned a lot from this video. Thanks again!

@clintdunn35 2 года назад

Great instructional video. Wow, it was a lot more work and know how than I thought.

@pagsubokisadalawatatlo1159 2 года назад

A big help! Thanks bro keep on sharing 🙌.

@priyophan 2 года назад

Excellent details , learnt a lot today .

@sonyajones 3 года назад

Great repair, my friend. I've got an Onkyo that just came in for repair. Really enjoy repairing vintage audio equipment. Awesome video!

@PurpleDreki 10 месяцев назад

Great work! Very educational!

@a.a.2677 3 года назад

Well it sure turned into a restoration job very quickly :) That must have taken a few working hours to complete ! Thanks for the video !

@JonnyFix 3 года назад

I've always just fixed the original fault. It's crazy how likely it is that so many caps can be bad. I'll have to be more proactive at testing them. While the unit might work without new caps it's good preventative maintenance. Definitely worth doing from a business standpoint to avoid comebacks.

@frankpitochelli6786 3 года назад

Very well said, I too would've just repaired the problem years back, but, nowadays with the Chinese electrolitics we can't take chances, especially now that I invested in an ESR meter several years ago and its worth its weight in gold.

@jamiestarr1022 2 года назад

I guess after that video, an ESR is a must on the bench.

@izzzzzz6 2 года назад

you don't need caps. lol

@giorgostexnikos6976 3 года назад

very nice job.thenks for the video

@rayofcreation3996 7 месяцев назад

Awesome! Thanks so much. 🎉

@walterdockins8475 3 года назад

Great video! Thanks so much for the details in your videos. I was a big Onkyo fan at one point and repaired a couple of the flagship models and I currently have a lower end model that I gave up on awhile back. I gave up because it has the same protect turn off issues as this one. I already know that the fix will be the same as you have shown here, a ton of bad parts and a lot of work. I still have it and may get back to it given your inspiration. I also need a decent ESR meter as I also have an Anthem unit with bad caps on the HDMI boards, well at least one is leaking. The HDMI boards works sometimes and sometimes not. I watch your videos for knowledge and inspiration to get to some of these project I have sitting around. Thanks again for the content.

@niwatuwayasaratne6246 3 месяца назад

A very good repair

@davidharmon8745 2 года назад

Great job

@ericl.winter3622 Год назад

Amazing work! I learned a lot. Now, if I can apply it to my old Onkyo. I definitely have a plan of attack now. Thanks so much!

@jamiestarr1022 2 года назад

WOW. Great video. That looks like a nightmare to disassemble.

@TheKuldeepsingh88 3 года назад

great job steve,exellent work on audio systemand love to see your blue ESR meter

@seanbittner7136 3 года назад

Bravo. I have TX-NR636 doing exactly the same. I hope one of your videos goes over testing the speaker/line integrity. This unit of mine has always been touchy. If HDMI couplers are used make sure they are high-quality. Those wall plate couplers are garbage and will give subtle maddening grief unending. Will edit updates.

@OldSkoolF 3 года назад

Cool... Great job!!! Subbed.

@NightSociety 5 месяцев назад

nice, very artistic

@xexpat6808 2 года назад

What a find!! My SR606 died this summer. As an old retired e tech I thought I'd pull it open and poke around. I've always run on the principle that, like a light bulb, it's the initial surge that stresses components. So, like my 1976 SAE 2900 Parametric Equalizer, still on and humming away 24/7 waiting for me to use it's phono input. So I would also leave my 606 ON in the garage where I use it to drive 2 big speakers. But, stupid me, for not thinking of my South facing garage in Phoenix that regularly climbs to 120 deg in the summer! And NO fan! My whole 606 pre-amp board is blacker than your 1 channel! Anyway, got my esr meter and ordered my caps. We'll see. Cracks me up that at my age, they're calling this nice 7.1 Onkyo "Vintage" hahaha! GREAT video!! Well done. Thanks!

@reginaldosilva2358 2 года назад

Muito bom técnico em eletrônico (professor) amo eletrônica só não tive oportunidade de estudar, admiro muito essa profissão! Tenho um onkio TX Sr 607 para concertar, aqui no Brasil não tem nada infelizmente! Barra do Piraí RJ abraço

@waltschannel7465 3 года назад

I was introduced to your channel from grants pass tv. He said that I would be taking place as I've never been before in troubleshooting electronics if I visited your channel. Boy, he wasn't kidding!! I had your channel bookmarked, but I don't recall if I ever watched any of the videos on it before. Really really interesting stuff! I'm looking forward to watching more. I didn't understand how the circuit works that changes the bias on the outputs based on their temperature.

@rohitbrowsing 2 года назад

excellent but very complicated for any random person to follow, but appreciate you efforts

@spacewalker3519 2 года назад

Thank you for this repair documentation. I have an HT-R570 here on the bench that I'd really love to have operational so I can have some tunes. Failure mode: Standby lamp on all the time. Power on. Lamp goes out, transformer hums, no display, 1-2 sec then shuts down. I checked a few things on the standby psu side. No joy. One of the first things you said was check the output transistors. I found 2 dead shorted output transistors. Q6064,Q6065. To see if any changes occurred, I cut those two guys out....result: first I forgot to plug in the heat sink sensor, and I got another fail mode, but once I hooked that back up, standby lamp full on, power on, display comes on, able to select inputs, unit stays on. Heck yeah. I'll get those parts replaced.

@frankpitochelli6786 3 года назад

Wow, these electrolytic s are just not getting any better, it reminds me of the older Mitsubishi widescreens that would have 100s of bad elec.caps. Another enjoyable video and great job Steve.

@ThePreyMantas 3 года назад

You earned your pay on that one. Most complex unit you've worked on since I've been watching. Looks like that unit could use some ventilation help keeping it cool. Those boards were definitely baked crispy! Please pass the butter and knife, thanks!

@zs1dfr 2 года назад

In fact I added a 5v horizontal laptop cooler fan above the power transistor heatsink, to improve venting the hot air upwards and outwards through the vents!

@ThePreyMantas 2 года назад

@@zs1dfr That's was a smart pro-active thing you invested it. If it seems like it can can get to warn, what a few extra $$ more to be certain. Good job

@twins924 Год назад

Mine is doing the same thing I watched both parts of your video afterwards me and mine took a short walk to the dumpster

@norcal715 Год назад

Sorry.

@0rangeyOrb 10 дней назад

I have this machine with same On0ff issue; this was helpful - but our speaker thingys are all copper with no burned looking spots, guess we have a diff problem.

@2coolbaby4u 2 года назад

Thanks for sharing. Now i know what's wrong with my Onkyo. I wanted to get it repaired but thinking about it probably cost more to repair than the actual receiver cost. 😞

@norcal715 2 года назад

This 606 repair was $200 USD, although I really didn't make much of a profit. I didn't expect all of those caps to be bad. Oh well, customer is happy.

@Lowkey_nxthxn 3 года назад

Love these videos I wish you could be able to have a look at my Denon amp

@norcal715 3 года назад

send me an email norcal715videos@gmail.com

@Lowkey_nxthxn 3 года назад

@@norcal715 thank you very much for reaching out to me..

@PeterMilanovski 3 года назад

Excellent repair! I'm happy to see that you choose to replace all the Capacitors across all the channels even though 1 or 2 were showing up okay... I have to ask, do you check for size comparability with the new Capacitors? Or do you just order the same voltage and capacity value? And also... Have you ever considered going up in voltage rating on the Capacitor when it's located next to or close to a heat source? Because by going up in voltage capacity, the capacitor will have better heat tolerance... I have been looking into the Panasonic Capacitor datasheet and it shows how by going up in voltage extends the life of the Capacitor... It's just a thought that I wanted to put out there.... It's just a preventative measure... Keeps that device from retuning to you bench and leaves the door open for new devices and customers that got referred to you...

@izzzzzz6 2 года назад

you can buy high temp caps. if you go up in capacitance you should also go up in voltage, not all applications allow variation in capacitance, only voltage, changing the values, either voltage or capacitance will change the ESR the in series resistance of the capacitor.

@lewiskhan9825 3 года назад

Grate video on a side note what would cause a teac av receiver to vary the volume on its own

@arindamdas936 9 месяцев назад

Great video mate. The only thing that's probably not been changed is the Power Transformer and the outer metal casing 😂😂 We see so so many Onkyo receivers failing due to overheating. Makes me wonder if there are some serious design issues with these. Ideally ABRs should go to protect mode if heat is detected more than the defined threshold. Probably the design engineers were not up to the mark.

@VishnuKumar-np2vv 2 года назад

Mn130s and mp130s are available in online stores

@rollinsrussell4818 4 месяца назад

I have one need some work . But I am in the Bahamas

@izzzzzz6 2 года назад

often the bias potentiometers become oxidised or even blown open from the damaged power transistors. Either way it needs to be checked and pots cleaned with a deoxidiser or replaced usually 100ohms

@antoniocuautle7742 9 месяцев назад

You're an absolute professional My questions are, how much did you spend on parts for this repair? And how much does a professional like you charge for the whole repair?

@norcal715 9 месяцев назад

I think the part cost was in the $50-75, and the total repair was only $200

@GreenSpeedo 4 месяца назад

Hi i wanted to ask did you turn the idle current screws to the lowest possible before turning on ?

@sudhanil 3 года назад

wow.

@laurentromero9453 5 месяцев назад

Oui merci de me repondre, j'entends en effet le clic du relai l'ampli reste allumé mais je n'ai aucun son

@izzzzzz6 2 года назад

Dismantling is not that bad. You keep the back panel attached and just disconnect a few cables from the front, then the entire internal structure lifts out as one. There is just enough cable to stand it on it's side over the transformer. Watch the last cable doesn't fold over as it wraps over the transformer while you lay the assembly down on it's side. I'm going to have to watch part 2 now to see if he works it out.

@izzzzzz6 2 года назад

I'm thinking the reason some transistor suppliers seems so cheap is because they have all of the transistors that don't match well. All of the expensive suppliers have the average ones that match well.

@sudhanil 3 года назад

Can you please advise where can I get ONKYO HT-R395 repair manual/schematic?

@Gouthamhegde 9 месяцев назад

Excellent ! Was wondering you can help with a query regarding identical AV receiver (TX SR606 ). I want to take out signal before amplification stage (basically I need pre out ). What I intended to do is , have a linkwitz Riley 24dB/ Octave 2 way active crossover for each channel and have separate amp powering high and low frequency in each of the channel . sounds crazy but I love those crossovers .It would be great help if you can tell me how to take pre out from this particular model of AV receiver.

@windcare 2 года назад

I have a 507 with the same problem, after viewing this video I'm scare to try the same repair 😱

@Electrolab28Ag 3 года назад

Great Repair. Where did you get the .22 ohm Emitter resistors to buy? I have been lookin for them and cannot find them.

@norcal715 3 года назад

from ebay

@edithboozy1000 3 года назад

1:50 What is that tool you are using does that melt the solder and then suck it up afterwards all-in-one device?

@myszkaagresorka3506 3 года назад

3:10 - refreshed used scrap or fakes? For example 2SC5171/2SA1930 should have DC current gain at least 100 (at low Ic)

@mickblackmore290 3 года назад

I have a Blue ESR meter and in watching this you are saying for instance @21:39 you say a 220uf @ 25v should be less than 1/2ohm but the meter contradicts that I noticed this a few times am I reading the meter wrong or are you just going from memory and your old analog meter and not looking at the Blue ESR meter scale. Thanks love your videos. also found you from Grants Pass

@laurentromero9453 7 месяцев назад

Bonjour, Je suis en train de réparer cet ampli, pouvez vous me donner la référence des plus petits composants s'il vous plait? Merci et bravo pour votre tuto👍

@gatorgotme 3 года назад

Is there a listing somewhere for the capacitor values and what they should measure?

@mariushmedias 3 года назад

Datasheets will have a column which says Impedance at 100kHz ... at high frequencies Impedance is pretty much same as ESR, so you can use that value. As you repair things, you'll get an idea and you'll tend to remember what a capacitor of a specific capacitance and voltage rating (and volume, because that matters as well) should measure... Also keep in mind that capacitors can have different properties and in some circuits the ESR matters. A capacitor could have 0.1 ohm ESR and another capacitor of same capacitance and voltage rating could have 0.5 ohm esr ... they're both good, just different electrolyte formulas, different properties, maybe one is optimized for small diameter... and in some circuits the slightly higher ESR may be preferred.

@harvey66616 2 года назад

I'm curious if the customer followed your request and brought the speakers in for inspection, and if so whether anything probative came out of that. Would be great if you could comment on whether you found any new information about what actually lead to the failure in the first place.

@norcal715 2 года назад

They said there are not even any speakers attached the that output. I attribute to bad capacitors 100%

@benkabrit509 3 года назад

Hi, tank you for sharing your repair. It is very usefull and detailed. Where do you find the repair manual in general? Good sites to share please ? Sorry for my english, i am french.

@norcal715 3 года назад

Usually hifiengine.com or elektrotanya.com Between these sites you can find 80-90% of manuals.

@benkabrit509 3 года назад

@@norcal715 🤗

@laurentromero9453 7 месяцев назад

Hello, Can you give me the reference of the driver temperature regulator transistor please? I don’t see it on the diagram. Thank you

@SeanBZA 3 года назад

Had one similar Onkyo come to me, but it was scrapped, digital logic board was also faulty, losing channels and not responding to the system controls. Not worth repair, as it was not capable of video better than standard definition either, so was replaced with a new one that could handle HDMI input and output. It had spent the last decade acting as a radio amplifier.

@jamesdavies686 3 года назад

Steve, what was the part number on the little transistor glued in between the two taller ones? I have a similar Onyko with the two NPN and PNP power transistors blown. All other components are testing fine but that little one in the middle is visibly blown so I can't go by markings. @ 5:48 Also, can you tell us the part number for those emitter resistors?

@norcal715 3 года назад

The emitter resistors are .22ohm 5w x2 ( eBay is the only place I have been able to find them) the little transistor between the driver transistors is a 2sc1740s seen at 2:24 in the video

@lildog1s 2 года назад

How much does something like this run I have the same unit same issue with a non working display

@norcal715 2 года назад

Its hard to say depending on what the failure is. email me Norcal715videos@gmail.com for details.

@KamiakHD 4 месяца назад

So my takeaway from this is that it runs warm, and I dont see enough cooling in the system, would it be better to 'undervolt' the system? Im not familiar with repairs so I can only go off of my knowledge of pc solutions. If you want the system to run cooler you undervolt the cpu slightly (edit: this is something that can help the longevity of gaming laptops). Im curious if that would help a system like this?

@nilolee2426 3 года назад

Hello, I have Samsung tv and I’m trying to fix the power supply board BN44-00264A, the secondary fuse(fm802S) blew. I found out that 2 mosfets (Q1820,1821)failed, someone on line posted that I should also check the smd transistors around this mosfets. They are like tiny black rectangular shape with one pin on top and 2 pins on bottom,labeled as Q1802,1803,1805,1806. I used multimeter on diode setting and I poked everyone of them on the circuit board and I’m getting readings even the black and red leads vise versa in all of them, I just want to know if they are bad too? Because I thought when Im getting a reading on positive lead on a pin, I should not get anything on the negative lead,is this right? Thanks in advanced

@norcal715 3 года назад

Its been too long since I worked on these units. Without having it on my bench there is not much I can do. Sorry.

@dylanstone2313 14 дней назад

Hi there I have a onkyo tx-nr 757 my onkyo has no dts chip

@SherinPuzhakkal Год назад

Sur' Which liquid is used to clean....???

@norcal715 Год назад

Usually ACETONE! The magical solution.

@izzzzzz6 2 года назад

Do you know what caused the parts to fail in the 1st place?

@norcal715 2 года назад

Most likely the bad capacitors causing a oscillation.

@wildiron4795 Год назад

So, I have a tx-nr828 that needs repair. Wouldn't it be cheaper just to replace it?

@norcal715 Год назад

Hard to say until it is diagnosed.

@VishnuKumar-np2vv 2 года назад

Well done Any equivalent for mn130 and mp 130 please help

@norcal715 2 года назад

What brand/model is it in?

@VishnuKumar-np2vv 2 года назад

Onkyo txsr 605 please help

@VishnuKumar-np2vv 2 года назад

Any suggestions??

@Chiefkamanga Год назад

I HAVE SAME PROBLEM ON MY AMPLIFIER IT WILL BE VERY HELPFULL FOR ME IF YOU CAN TELL ME THE PART NUMBER FOR THE DRIVER TRANSISTOR THEY ARE THE ONES THAT LOOKING BURNEND INSIDE

@tiotito9777 2 года назад

Mine does that same problem but no bad resisters no bad caps no bad wiring I Evan tried to reset it and it still won't stay on plz help me

@norcal715 2 года назад

The microprocessor looks for several defects, missing power supply voltages as well as amplifier DC offset. If you don't see a DC offset on the power amp it probably has a power supply issue.

@MWorsa 11 месяцев назад

How much does a repair like this cost (the customer)?

@montygore 2 года назад

I love the analog meter. It might be but analog meters register my brain faster.

@faisalmalik9922 Год назад

Hello sir I need 2 transister mn100s

@mobilered2776 3 года назад

Hi can u share me details from where u have sourced the parts please..

@ggsumner1947 2 года назад

Mouser Electronics

@dennislittle3181 2 года назад

What’s your location I’ve got one that needs work

@norcal715 2 года назад

I am in Chico, CA. Email me norcal715videos@gmail.com

@quincyharrisonsr5293 2 года назад

Yeah I got all to you and it's got a problem of not wanting to turn down and I things with my Bluetooth can you give me a comment back or how much would it cost me thank you I'm dying to send it

@Mots-mot 9 месяцев назад

I am having similar amp and its display is very dim. Almost all the caps in the board which is under the HDMI board where two heatsinks are installed (chapter from your video The Gift that keeps on giving PT2) are bulged and about to explode. Probably that will solve the problem but before I start to fix My Amp keeps on switching On and Off in every second and Relay click sound is coming from the board which is stopping main transformer to power on. Do you suggest how to debug this and rectify the fault?

@Mots-mot 9 месяцев назад

Post changing the Cap C9001 (470/63v) unit is started and display is back to normal. But now there is no sound on any channel. When I connect speaker there is small crack noise comes which is true sign of AMP is working . Any idea how to debug for audio?

@GreenSpeedo 4 месяца назад

@@Mots-mot i know this is late and i aint no technician but check the driver board or just the resistors near the transmitors and yh

@Mots-mot 4 месяца назад

Thanks for the reply. I have fixed the problem by replacing the caps . I am facing a weird problem , whenever I removed the Board and assemble it back it won’t sound. To resolve I need to reset the system and it worked again. Is this a normal behaviour that after every disassembly it needs to be reset . Once assembled back it never shows the problem and working fine for long hours without any prob .

@GreenSpeedo 4 месяца назад

@@Mots-mot I mean for new capacitors and that possibly

@nsubugamoses5972 Год назад

My onkyo receiver shut down immediately few seconds when powering on why sir

@JFisher-kl5fx 9 месяцев назад

Prolly short-circuit

@dylanstone2313 14 дней назад

I’m trying to find someone who can tell me what wrong with my onkyo tx-nr 757 it as no sound it still come on

@uneedabryant4860 11 месяцев назад

How much does a repair like this cost?

@norcal715 11 месяцев назад

this repair was around $250USD

@nsubugamoses5972 Год назад

Why my onkyo receiver tx-sr309 over heating sir

@JFisher-kl5fx 9 месяцев назад

Onkyo is notorious for hot HDMI boards. First make sure that yours is not powered on standby (depends on settings -- watch out for HDMI or Zone-2 pass-through). Then buy a quiet USB fan to put on top of the unit and set it to run at slow speed (will power-on whenever unit gives power to USB).

@lanae19731 2 года назад

I have onkyo ht-R397 and won't even power on.

@edithboozy1000 3 года назад

8:45 Can someone who understands how this works explain to me how when he makes those little pools of solder that are so close together, why is it that they do not leak into each other and cause each other to short out? I always wonder that as I watch these types of videos. It all seems so close together on circuit boards I dont understand how its even possible to keep solder from a nearby connection out of it's neighbors way

@sakisgri2165 3 года назад

Flux helps even solder flow. when soldering flux is your best friend. You may want to check out NorthridgeFix he does microsoldering and explains alot of what he does and why.

@seanbittner7136 3 года назад

Flux is this magical stuff that makes solder read your mind and follow your will. Don't be shy using it and you will be amazed. Also avoid lead free solder.

@harvey66616 2 года назад

Flux helps a lot (per other comments), but all it's doing is removing oxidation that gets in the way of a good connection. The main thing that keeps the solder together is surface tension. The solder essentially wants to "bead up", except where it touches other metal. The coated PCB area without traces acts as a barrier to the beading action and keeps the solder on its own side. Of course, you can put too much solder and wind up bridging the gap. But it takes a _lot_ of solder for that to happen. With a little practice, it's pretty easy on most PCBs to keep the solder amount well below what's needed for all the solder to stay on its own little island. :)

@edithboozy1000 2 года назад

@@harvey66616 This was the answer I was looking for. Thanks

@mikelborg4712 2 года назад

How much was the bill?

@norcal715 2 года назад

Approximately $200 USD

@khaledmansour1271 3 года назад

I have a unit with the same problem but it is SR607. How much is the repair?

@norcal715 3 года назад

This repair was $200 USD

@JFisher-kl5fx 9 месяцев назад

@@norcal715 After all of the testing, disassembly, desoldering, new parts, resoldering, replacing capacitors and clean-up? As soon as parts are available, I'm pulling cash from my ATM and driving your way with my blown Onkyo TX-NR838.

@KuntalGhosh Год назад

These sets are built so cheaply. I don't like sanken transistors they always feel low quality and i always see more of these fail.. Everytime a car class ab car amplifier or any receiver comes upto me with blown output transistors made by sanken. I replace them witj 2sc5200n and 2sa1943n. Those transistors are better speced and never had one comeback. Those are so much more robust that if they comeback next time it's generally the powersupply section blown because the transistors are so strong and punks driving their amps into hard clipping cause them to blow up. I buy genuine ttc5200 or 2sc5200n. When replacing anything that had lower specd transistors than 2sc5200. And if the amp comes with 2sc5200 or ttc5200 then i only replace it with the O grade 2sc5200 that are more expensive but they have 30% larger die size and made in japan.. There are lots of fakes of these audio output transistors so i only buy from authorised toshiba dealers..

@laurentromero9453 5 месяцев назад

j'ai reussi a ce que mon ampli reste allumé en changeant les transistors et resistances mais aucun son ne sort de cet ampli

@norcal715 5 месяцев назад

Entendez-vous le clic du relais du haut-parleur environ 5 secondes après la mise sous tension ? Vous pouvez toujours avoir un décalage DC élevé sur l'un des canaux.

@laurentromero9453 5 месяцев назад

et donc cela signifie quoi? que dois je regarder de plus?

@bruinarnold 2 года назад

Hi, I got your name from some other guy on yt. I am looking for the video eeprom of this onkyo receiver. It's q8085 on the hdmi board and I am looking for the bin file of this chi because mine is empty. Maybe you have a copy, it would be much appreciated

@norcal715 2 года назад

Sorry, I do not. Try heating, and cooling it to see if you can retrieve the data with a eeprom reader. Let me know how it goes.

@bruinarnold 2 года назад

@@norcal715 Thks for getting back to me. I don't think the flash chip is bad because i can read it without a problem. It's just empty. My guess is that when the dc converters on the hdmi start oscillating because of bad caps flash somehow gets wiped. I flashed it with a TX-SR605 bin and it started working. But the OSD menu is different between the models. Anyway, thks fy response

@izzzzzz6 2 года назад

I'm trying to uy a broken TX-DS 696 to repair but it turns out it weighs over 15kg and is going to cost a fortune to ship. lol

@norcal715 2 года назад

They are heavy!

@carl2755 Год назад

Why would there be so many bad components on these boards? Is Onkyo to blame for the number of problems? Do some manufacturers use "discount" components that are going to have a shorter life?

@norcal715 Год назад

I think yes "discount" components payed a small part. I think the owner had units stacked on top of it without adequate ventilation. That is what I think killed all of those capacitors.

@jjohnson3600 3 года назад

$$$$$

@wanglee21 3 года назад

wow this is not for the unexperienced. I wouldnt even know what too look for. there are over 10 thousand things to check. lol only those who have a few hours or days can even have a chance to fix something like this if they have no idea where to start.

@windcare 2 года назад

Great job