Oral-B Precision Electric Toothbrush Battery Replacement | Braun Professional Care Smart Series

Подписаться 24 тыс.

Просмотров 61 тыс.

50% 1

Replacing the dead batteries in two of my Braun Oral-B electric toothbrushes. This is for the Precision 4000 and Smart Series 5000 which are the new versions of the old Triumph 9400 and 9900. These were the more expensive "professional" series which were $80 to $120 new so its worth the $18 for replacement battery after 5 years. I used "OEM" FDK brand (Sanyo) Japanese cells from an Amazon toothbrush repair seller.
OEM FDK 42mm 2,150 Cells - amzn.to/3b08baa
OEM FDK 49mm 2,700 mah Cells - amzn.to/3qgpwCd
Air/SMD Soldering Station - amzn.to/3jM99Li
Solder Sucker Pump - amzn.to/3rUFFh7
This soldering kits comes with solder, twizzers, and everything you need to do the job. amzn.to/3zxXuGD
----------
Support the Patreon: / tunerwithkids
Merch Available: teespring.com/stores/tuner-wi...
Follow Me on IG: / tuner_with_kids
For questions and inquiries: tunerwithkids@gmail.com
-------------------------
#electrictoothbrush #oralb #brauntoothbrush
Disclaimer: "Tuner with Kids", the alias for the human content creator for this RU-vid channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any elses, vehicle/property whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle/property. Please note that some of the links provided are affiliate links and I may earn a commission if you purchase through the links. I use all of the products shown and recommend them because they are from companies I have found to be helpful and trustworthy. Please let me know via email if you have questions regarding any of the products/tools used.

Опубликовано:

12 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@yuvegotmale 3 года назад

Typical German over engineerd , tecnology run amuk. this could have been designed to replace a battery easily.....but the Germans?? nooooooooooooo lets make so complicated hardly anyone can fix it.... my 3 month old toothbrush is garbage....

@stephaniew6324 Год назад

This is beyond my capabilities. I did stage one. It’s pretty gross! But I will try the next steps. I wish it wasn’t so difficult to replace a battery !!

@IThinkICare

Like water suppose to get in there ?! Defective design or production if you ask me.

@paulm5443 Год назад

You make this look a lot easier than it actually is. Most of the time it's not worth trying to get them apart as it's a lot harder than shown here. Mine last for about 4 to 5 years so they go in recycling and I buy a new one.

@PushyPawn 2 года назад

Someone should tell this guy about the existence of desoldering braid.

@urpoche

I broke my charger when I tried the 1/4 turn :(

@brianrichmond3777 Год назад

Kudos to you for repairing instead of replacing and cleaning up that corrosion instead of giving up on that one.

@BuddyBoy68 2 года назад

I found your video very useful. Unfortunately, it seems I wasn't careful enough on my very first solder attempt and it didn't work. Or maybe I needed to invest in better tools, instead of a cheap kit. The most surprising thing about your video was how you say the word "solder". I thought it was just you, but it isn't. I found other soldering videos and it seems all Americans pronounce the word the same, which is bizarre to us. The way we say it in the UK is just as it looks. It's the word "Sold" with "er" at the end. Great video though. Æ 👍

@dmitrytitkov8686

Cool! The most difficult thing was to remove the cap, the coil came off, but everything can be fixed! Thanks to the author, everything became very clear

@ruizlivingplantgifts8485 Год назад

We need more people like you! I'm not sure if i can perform the changr from just the video, but the thought of throwing mine out or even ship back to "recyle" grosses me out!

@michaelmadsen4923

Thank you for the guide! It helped me repair my Braun Triumph Professional Care toothbrush. The hardest part was to get the bottom piece off. Other than that, the process was pretty straight forward.

@BenjaminGuiam Год назад

Thank you for the DIY video to change the battery. A bit difficult because 1st time to open. Placed an order for the battery and hope I get it soon. Did not had those rust because it was still sealed tight and plastic frame. Mine had capacitors on the motor.

@noelelnolo9642 Год назад

Excellent video, very detailed!! Thank u

@girardhull6781 Год назад

Thank you so much for this!

@garyrendano4717 2 года назад

awesome video.. thank you for posting it.

@cool79hd 2 года назад

excellent video and just like that I fixed it.

@alannguyen5050 3 года назад

Do you think you can make a video about permanently stopping the TPMS warning on the IS250? Mine has a super annoying warning that blocks the middle display

@N9CQX

Nice job with the video. I tried the 1/4 turn but the base piece got stuck into the opening that did not turn. Do you think soaking in hot water would help to loosen it that piece that is supposed to turn? The bottom of my charger says it is type 3757. Harry

@TocyBlox 2 года назад

Thanks for this great video! However, I would not use lithium grease on plastic! Silicone is the way to go.

@SteveN-bh3wv 2 года назад

Looked at the link for the 42x17 battery and it looks like the solder tabs are offset in opposite directions. Is this an accurate pic? The battery I extracted, both tabs are offset slightly to the same side.