Overlanding Diesel Heater In A Case | Detailed Build | Tested 1000 Hours | MIKE HUNTS 

Love it, so good to watch straight clever handy man type set ups like this. Human nature forces some critics to always say things about those making their own builds and ideas but you did well and great watching. About to do the same with a chilly bin for my roof tent here in New Zealand. 👍

Little Handydude!!! That is quite the little setup Handydude. I learn something new everytime you post a video.

Very cool project

I love your bandsaw setup, very creative.

HOOO BABY FINALLY A NEW VID ON THIS CHANNEL

Hole saw and plastic - run your drill in reverse, cuts much less chunks and scribes itself a start point without the biting jump

Just an FYI, you can use red diesel in that. Red diesel is sold without the highway taxes on regular diesel fuel, it's red because they add red dye to identify it so no one can put it in vehicle fuel tanks without it staining the rest of the fuel in the tank making it easy to verify by DOT by just dipping into the tank. If they find red dye in a vehicle tank the fine is pretty stiff. You can get it at most truck stops because it is used in reefer units. It's also used in farm equipment and any off road diesel vehicle.

LFG!!!!

Wow I forgot about that heater.

So what exactly should people do if they don’t know what a mass air flow sensor is? You “accidentally” cut that out. 😂

That 1" of dead space in the fuel tank could catch sediment and any stray water, so atleast there is some benefit.

💪💪

🇺🇸🤘 Heck Yeah Mike Hunts🤘🇺🇸 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸Bump🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

🎉🎉🎉🎉

Every RU-vid video I went and watched. Everyone copies everyone else. You wasted a lot of real estate. I made one with Ridgid medium size box and other with Apache 4800 case. The ridgid box has the heater, 20ah LFP battery, solar controller, voltage monitor, AC to DC charger, USB, 12v socket, and cooling fan. I also added a quick disconnect fuel tank. In the 4800 case, I placed the heater, 50ah LFP battery, voltage monitor, 12v socket, and AC to DC charger. I exited the case with exhaust and the intake without the use of the pipes. No need for the cooling fan. I just added two 3" vents on opposite sides. I also added a quick disconnect fuel tank.

Curious, what did the build cost you? Thanks for sharing the build..

No need for PPE. Yours eyes were safely out of view!

Mike, what's the bandsaw table for the Milwaukee?

Is that the 5KW or the 8KW version?

Why don't you just buy an all-in-one kit? These setups have everything you just built plus the fuel tank. About $100 plus tax etc. They even come with a handle.