Hey, Thanks for the compliment. Hopefully it was kind of entertaining and helpful. I feel better and better with the buy everyday. I knew there would be trial and error expense on my end. I truly love the machine. I think for the most of us once we nail down the track tensioning for the machine, I think its just standard maintenance and we are gtg. I hope to have a few more helpful videos soon.
@@TheJBros520 Well i've only got 12 hours on my machine, but I'm definitely taking the tracks off to not only learn how to do it properly. But to grind down those rollers if need be. Thanks again..
You and me both! I'm hoping we will get something together soon! Trying to figure how much info to put in 1 video, we don't want it to overload anyone.
i have the same machine, my tracks keep coming off tho, and i can barely get the screw and nut that far up. there are two allen bolts holding the front idler frame and two holding the back are yours at the bottom or top of the adjustment?
Ok, best I can think. Those Allen bolts are not adjustments they are just holders for the entire Track system. Make sure those are not loose, mine came all tight. With that being said, When tightening the skid with track jacked off the ground. Second when tightening the track be sure your Idler Wheels are clean of packed dirt. I didn't clean mine after last use. I probably have 3/8 inch or more of packed dirt on my idlers making the track more loose. Before or after use Grease machine and Clean the Idlers. Let me know if this helps.
I will upload a pic. I tightened both sides today but the bolt does not go in that far. I do have the 2 1/8” space and the tracks are tight but the bolt on both sides seem to be exposed 3-3.5”.
I am thinking that you may not be getting the bolt in the thread of the spring shaft. There is a point the bolt is loose and it needs to have pressure to start it to thread back on. One thing that came to me talking with my dad and we were thinking for future track stretching. Is putting washers acting as spacers in the spring idler shaft. Now i have not done this as i have not needed to. Any info is great as we are all breaking these new machines in together. I might do an Updated Overview of the machine shortly as I am nearing 15 hours.
We have one that the tracks are coming off regularly and it is surging like there is a fuel problem or air flow issue. We have changed the fuel filter and it helped for a bit but started back. Any thoughts
Could you upload a photo of the tracks I am curious to your issue there. Far as Fuel and air flow issues. It's to difficult to give any guidance without the machine. The boys use the skid daily so, any progress good or bad we will keep you updated.
I'm thinking that the heat creates a "vapor lock" in the hose ... when I loosen the hose to the filter and retighten, the engine seems to run fine again, but as a back-up I bought a low pressure electric fuel pump and a water separator filter ...
Followed to the best of my ability ... Can't get that 1/4" clearance even w/o the bolt ... Still can't get track on ... btw, same model and I'm using ratchet straps for extra pressure ...
