I bought mine from Amazon as well but it was a different brand. Mine didn't come with instructions or the connection to go online to the blinkers. I hate linking into my jeep wires. But have no other options.
They appear to no longer be on the website. It’s a shame. Quadratec has a DRL harness but it does not have turn signals, you would have to tap/modify it to get the switchbacks working.
It’s an LED. In theory they run thousands of hours, close to the life of the vehicle. To directly answer your question the housing is sealed so nothing serviceable.
So I have a rather simple/silly question! When you turn the vehicle on and the DRLs are on/running, is there an option to change the color of the little red arrow accents? On one of the sites selling these lights they were blue instead..had it like you could choose red or blue!? Just curious!
If you’re in a Sport you need to turn headlights on to get the DRL. OVS contacted me and asked if I would do a video for a color changing version, I declined, only because I have no interest for my rig. I’m still running these btw.
There are two wires off back of the headlight outside of the factory connector, one is power for DRL and the other is the turn signal. Check the install paper for wire colors.
If you didn’t buy an adapter harness kit go to the 3:10 mark to find the connector inside your wheel well. You can tap into the factory wires there. I believe white/green wire is turn signal on both sides.
So i bought the wire harness you recommended and watched the video about a dozen times. You hook the red to the white as shown for drl but where does the black and yello connect to? Plus i have the blue wire remainingon the harness supplied with the headlights. Thank you so much
I installed them and now have a flicker on the passenger headlight. When i turn on low beams it flickers like crazy and the drl turns off and wint come back on even when low beams are turned back off. I have tonturn the jeep off then back on for the drl to work again and they work just fine as long as i dont turn low or highs on. Going to have to return these i think@@myjeepadventure
What does the blue wire connect too on the headlight harness? I’m having issues getting the halos to run while headlamp is on and turn signal on halos aren’t activating