P06DA00 Mercedes-Benz / AMG Vehicles FIX

Подписаться 1,8 тыс.

Просмотров 72 тыс.

50% 1

P06DA00 fix on Mercedes AMG CLA45. A45
Known issue for the pins in the wiring harness to come out the plug at the oil pump control valve. Replacement harness part no A270 150 29 00
This is on the M133 AMG engines. Engine sump removal required. New modified loom required.
Hope you enjoyed the video, let me know in the comments below if you have experienced the same issue.
Please don’t forget to like and subscribe to our channel, thank you.
#amg #wiring #cla45amg

Авто/Мото

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 78

@heebeejeebeez436 Год назад

This code just popped up on my GLA45 Glad you made a video addressing the issue

@allmon3yislegal514 17 дней назад

Thank you so much for this video

@toyotoe3732 6 месяцев назад

Thank you.

@inch169 11 месяцев назад

Wow great video, but how did you move the lower coolant pipe.. ive spilt it under the dpf/ cat..and unbolted at the oil filter but i cant free it from filter housing.

@garyhoward9592 Год назад

Many thanks for the video as this makes me understand the problem, I’ve just had remapping done on my GLA 45 AMG which I was very frightened to do as I’ve never done anything like this to any of my cars before & I’m still paying it off & they highlighted this fault code before mapping , what does this sensor do & could it course problems if not sorted sooner rather than later ?

@necattinkaraman5636 10 дней назад

Hiii Thanks for the vid, I have this isseu with my 2015 cla 180 i just spoke with the dealer and they have the wiring on stock but do you have a part number for the pump ?

@BollerRory Месяц назад

What year is this cla I have a 2018 would it be in the same location to replace ? And same part

@ewolmullac6706 7 месяцев назад

If you leave this what kind of damage will it do? Like what is its job ?

@user-mu5tm1rn9x 6 дней назад

How much to roughly fix this issue on w205?

@heebeejeebeez436 Год назад

So you did not have to evacuate the Freon from the a/c line prior to removing the a/c compressor? I’m doing this repair now and wanted to make sure

@godfreysautomotiveservices Год назад

no mate I just unbolted and moved over to one side 👍

@heebeejeebeez436 Год назад

It’s me again!! So it looks like you’re the only one on the Internet I can find that’s done this job. Do you have any tips for getting that oil pan broken free? I’ve tried heating it, but I’m afraid that I’m going to mar the mated surfaces as I wedge in between the pan and the block. How did you get the pan to break free?

@godfreysautomotiveservices Год назад

I use a heel bar and there’s a couple of locations it will fit in between the sump and the block. Try to avoid any wedges etc that will go onto the face of the sump or block. Once it’s split it will come of easy enough 👍

@heebeejeebeez436 Год назад

@@godfreysautomotiveservices hey I appreciate your help

@karl-johankarlsson5057 Год назад

Really awesome video! I assume that it is simular job on the Mercedes C350e. The engine is alomst the same. (I think)

@hugemoose101 11 месяцев назад

Also just had this on my C350e. Mechanic claims it's common on mercs. Driven 1000 miles recently with it, it turns out... but going to get it done anyway. labour time is 10 hours, apparently. £1.1k eek! Did you get yours done?

@Opticar 9 месяцев назад

@@hugemoose101 Hello guys, did you get it done or did you do it by yourself? Just have mine pop up on my C350e too! Thanks for sharing!

@4TCUFC Год назад

I’m due to get this issue fixed on my CLA180 and I have been quoted around £480inc vat from a Mercedes’ specialist garage, does this sound about right?

@godfreysautomotiveservices Год назад

Hi there, yes prices will vary depending on location but this sounds about right 👍

@coldx2 Год назад

got this code as well on my 2016 C300, is the part you listed applicable for my model? I got this code as well as the P05E271 and needing a fix for that aswell.

@specialagentkappa6048 7 месяцев назад

hey did you find a fix for this i just got my error code this morning

@JesusHernandez-fz4cg 2 месяца назад

Thank you for this video. My GLB 250 picked up this code. Vehicle runs smoothly but will still address it. Two questions, did you use a gasket when you put the pan back on? And secondly, after you put back the oil pan. Did you put oil inside right away or did you wait for seal to dry? Thanks brother!

@godfreysautomotiveservices 2 месяца назад

No pan gasket on these, just sealant. It’s fine to put oil in while sealant goes of 👍

@finabeach1 Год назад

Hello, I need help. I have the same code on my 2016 Mercedes Benz CLA 250. I can switch on the car the cannot move to D, N or R. The problem come to me after changing the main batterie.

@godfreysautomotiveservices Год назад

Hi there, I’ve seen this before. The gearbox sometimes needs to relearn itself after a battery change, this normally takes a minute or two where you will need to keep the ignition on and foot on the brake pedal. It should show on your instrument cluster what to do. Hope this helps 🤞

@user-oc9mj4vv9s 11 месяцев назад

hey great video, P06da00 warning light has come up on my Mercedes-Benz C-Class Estate C200 Sport 5d Auto. the mercedes garage said part A270 150 29 00 was compatiable with my car. would you be able to advise what part number i would need for my car? thanks in advance

@godfreysautomotiveservices 11 месяцев назад

Hi, feel free to email me your vin number and I’ll look into this for you 👍

@Padd99 2 года назад

Hi, thanks for the explanation! A question... I have an A45 2016 W176, is the part reference the same? Thanks!

@godfreysautomotiveservices 2 года назад

Hi Paulo, glad it helped 👍. Yes same M133 engine in the A45’s.

@akramzakaria898 2 года назад

my 2017 E300 is giving me the same code. Should I change oil pump or this can be fixed Thanks

@godfreysautomotiveservices 2 года назад

I’m not sure on the set-up on the E300 but if it has a separate wiring loom to the pump I would check that first 👍

@joshanthony101 Год назад

My e 300 just popped up the same. How much was it to replace and where?

@bobbyshmurda649 Год назад

I have this code on my c200 2018 2L petrol is this the same part number bro?

@godfreysautomotiveservices Год назад

Hi, I don’t think it will be the same part number as this one. If you want to email your vin number over I can check the number you require tho 👍

@kurticmuzik_ 6 месяцев назад

Hello mate quick question is the proceds the same on a cla250 as well?

@godfreysautomotiveservices 6 месяцев назад

I believe so 👍

@richardblankers9628 2 года назад

Hi my a45 amg 2016 has this problem and this fault code. Is it possible that the engine gives less power when this code is active? Thankyou

@godfreysautomotiveservices 2 года назад

Hi Richard, I’m not aware of it affecting the engine performance from my past experience’s.

@sab0785 Год назад

Hey buddy, my GLA45 has this only code active and I do feel some power loss when in Sport+, there is no other error message. I just ordered the part and see if this makes any difference, I know that you askd this a year ago, but did you manage to replace yours and notice any difference?

@bigboundsy 9 месяцев назад

@@godfreysautomotiveserviceshi mate, thanks for this video, will this affect the engine in anyway we’re still driving the car up and down the motorway daily! Will get it booked in asap but is it dangerous?

@godfreysautomotiveservices 9 месяцев назад

@@bigboundsy i've not come across any issues where it would be dangerous to drive.

@tigerali7 2 года назад

2017 Mercedes’ E 300 code P06DA00 (The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open Circuit). Someone told me it’s oil pump solenoid need to be replaced, the question can I do it from the bottom or I have to remove the motor and flip it in order to replace it, can you please guys help!!!

@godfreysautomotiveservices 2 года назад

Hi Alex, if you send over the VIN number I will look it up for you 🙂

@tigerali7 2 года назад

@@godfreysautomotiveservices WDDZF4JB3HA016427 Thank you in advance!🙏

@godfreysautomotiveservices 2 года назад

@@tigerali7 You can replace it from the bottom with the engine in. You will have to lower the front axle and both sumps, time given for this job is just 5.8 hours to give you an idea, hope this helps 👍

@tigerali7 2 года назад

@@godfreysautomotiveservices perfect, in your experience, do you think with this code it’s the Solenoid or the harness, and do you recommend if it’s the solenoid to change the oil pump as well, not to mention the vehicle has 210 miles on it?

@godfreysautomotiveservices 2 года назад

@@tigerali7 In my experience it will just require the loom as this is a issue with some Mercedes petrol models. If it was just the solenoid I wouldn’t recommend replacing the oil pump.

@erikperez2911 6 месяцев назад

Is it just plug and play?? Or does it require some kind of coding??

@godfreysautomotiveservices 6 месяцев назад

Plug & Play 👍

@eddpower 2 месяца назад

F**king hell - I thought that amount on the whiteboard was £970 until you read it out!! Phew!!

@begd17 10 месяцев назад

What did he say about 10 minutes? Couldn’t understand. Was he talking about the sealant?

@godfreysautomotiveservices 10 месяцев назад

Yes, 10minutes to apply the sealant 👍

@bigt18cross Год назад

I have this code on my c350e along with P1D02-12 and P052E-71 crankcase ventilation valve 😩 I have zero luck with cars think I might start taking the bus

@godfreysautomotiveservices Год назад

Sorry to hear that Tony, crankcase vent valve is another common issue I’m afraid

@bigt18cross Год назад

@@godfreysautomotiveservices thanks for the reply mate any idea what sort of Labour time Iam looking at for these two jobs combined trying to get a quote for this is proving difficult everyone wants to charge me £120 to plug it in again first 😒

@godfreysautomotiveservices Год назад

@@bigt18cross I’m actually away on holiday at the moment, I’m back on the 6th and can have a look at the book times for you 🙂

@dlertahir1156 2 года назад

Hi and thanks for the video. I have A class W176, 2013. is this the same hardness ? where do you find this part ? mercedes benz dealer says that you must buy sett of hardness for the whole motor which is very expensive. can you please provide a dealer or website we can purchase it.

@godfreysautomotiveservices 2 года назад

Hi, is it the A45 W176 you have please?

@alistairgreenfield7246 Год назад

Where can I get the sealing plan from please

@godfreysautomotiveservices Год назад

Hi, sealing plan is from Mercedes WIS, it requires a subscription to use. If you email me I will dig it out and send you it 👍

@stevelawrence1287 Год назад

@GAS Automotive hi would there be any chance you could email me a copy of the sealing plan thanks

@user-lt4mq5vp6e Год назад

Wat heppent if you dont Cheng in time

@godfreysautomotiveservices Год назад

I’m not sure on that one, I’ve seen this fault stored in vehicles for years with no short term issues

@user-mu1rw1qr2u 3 месяца назад

Is that an Mercedes part number, Regards

@godfreysautomotiveservices 3 месяца назад

It is , yes

@user-mu1rw1qr2u 3 месяца назад

Hi, I have the same code P06DA00 I’ve just been to Mercedes for the same part, but my part number is different, 👍

@mannix1983uk Год назад

What happens if you dont fix it?

@godfreysautomotiveservices Год назад

Hi there, I’m afraid I can’t answer that one! The pump valve is there to adjust the oil pressure depending on the engines demand for it. I have seen many vehicles ignore this fault and still found to be ok but what long term effects it may have, I can’t be sure. My view is that, Mercedes used this system for a reason so would highly recommend the repair to be done 👍

@mannix1983uk Год назад

@@godfreysautomotiveservices Thank you for the reply. I have car booked in for the repair. Just wondering as I have no error lights on the dash and the car drives fab. This error came up on a diagnostic tool after I had a problem after a tune.

@godfreysautomotiveservices Год назад

@@mannix1983uk no problem. The fault code itself will never flag up on the dash but will stay as a current fault in the system so unable to clear until repair carried out.