DIY Paano Gumawa ng Rodela gamit ang mga recycle materials
#diy #construction #skills #builder #rodela #palitada
If you're a DIY enthusiast, you know that having the right tools is essential to getting the job done right. One tool that is often used in home improvement projects is a plastering trowel. However, if you don't want to spend money on a new one or have difficulty finding one that meets your needs, you can make your own using scrap PVC.
Why Use PVC to Make a Plastering Trowel Tool?
PVC, or polyvinyl chloride, is a type of plastic that is lightweight, durable, and easy to work with. It's also readily available in many hardware and home improvement stores, as well as from construction sites as scrap material. By using scrap PVC to make your plastering trowel tool, you can save money and reduce waste.
Materials Needed
To make a plastering trowel tool from scrap PVC, you'll need the following materials:
Scrap PVC pipe or sheet
Heat gun or stove
Scissors or a saw
Sandpaper
Ruler or measuring tape
Steps to Make a DIY Plastering Trowel Tool
Follow these steps to make your own plastering trowel tool from scrap PVC:
Cut the PVC: Use scissors or a saw to cut a piece of scrap PVC to the size and shape you want for your trowel. The size will depend on the job you are doing, but a good starting point is around 12 inches long and 4 inches wide.
Heat the PVC: Heat the PVC with a heat gun or by holding it over a stove flame. Be careful not to overheat it, as this can cause it to melt or become brittle.
Shape the PVC: While the PVC is still warm and pliable, use your hands to bend and shape it into the desired trowel shape. Use a ruler or measuring tape to make sure the edges are straight and even.
Smooth the Edges: Use sandpaper to smooth the edges of the PVC trowel. This will ensure that it won't scratch or damage the surface you are plastering.
Test the Trowel: Test the trowel by using it to apply plaster to a small area. Make sure it feels comfortable in your hand and that it's the right size for the job.
Conclusion
In conclusion, making a plastering trowel tool from scrap PVC is a simple and cost-effective solution for DIY enthusiasts. With just a few basic tools and some scrap material, you can create a trowel that is the perfect size and shape for your project. Plus, by using PVC, you are reducing waste and helping the environment. So, next time you need a plastering trowel tool, consider making one yourself from scrap PVC.
Step by step kung paano gumawa ng rodela na may rubber pang palitada o plastering trowel rodela rubber. Ang rodela na may rubber ay pangunahing gamit ng mga mason sa pag papalitada ng pader at pagpapakinis nito or pagbubully. Ang mga pangunahing materyales ay ang mga sumusunod: scrap na pvc pipe (3" or 4" size), scrap na rubber float, contact cement (rugby), screws, stripping knife, lagaring bakal, screw driver, hand drill at fire. Makikita ang sa video ang proseso sa paggamit ng apoy upang palambutin ang pvc pipe para gawaing flat ito. Makikita din sa video ang ibat ibang technique o pamamaraan sa paggawa ng rodela na may rubber upang mas maging matibay at tumagal habang ginagamit ito sa pag papalitada. At sana ay nakatulong itong kaalaman na ito upang makagawa ng sariling gamit pang palitada at makatipid sa pag bili ng mga gamit sa pagmamason o pag sesemento. Please like, share, subscribe and ring the bell for upcoming video update! Maraming salamat mga KaDesign!
#palitada #diyconstruction #HomeDIY
Handmade DIY Tools - • DIY Tools: Tile Settin...
Paano Gumawa ng Rodela with Rubber - • Paano gumawa ng PVC Ro...
Paano Gumawa ng Concrete Hamba Moldura Pattern - • Paano Gumawa Concrete ...
Paano Magbato ng Halo ng Palitada (Techniques) - • How to Plaster Walls w...
Mga Gamit sa Palitada - • Palitada Tools: Iba't ...
Paano Magkabit ng Moldura ng Bintana - • Moldura Cement Precast...
Paano Gumawa ng Pattern ng Moldura (Yero) - • DIY Making Cement Moul...
Paano Mag Kanto ng Palitada sa Pader at Bintana - • Plastering Window Corn...
Paano Mag Palitada (Step by Step Tutorial) - • Paano mag PALITADA ng ...
Paano Gumawa ng Window Grills (Tubular) - • Welding Tutorial Windo...
Paano Gawin ang Moldura (Bintana) ng Mano Mano - • Paano Gumawa ng Moldur...
Paano Magpahid ng Skimcoat - • How to Apply Skim Coat...
Paano Magkabit ng Precast na Moldura (Step by Step) - • How to Make a Beautifu...
Paano Magkabit ng Tiles (Tiles Setting) - • How to Tile Settings D...
Paano Gumawa ng Precast na Moldura - • DIY Concrete Project |...
4 янв 2021
