paint a mtb bike with wrap foil 

Hi! Erstmal vorab, dein channel ist echt toll, danke dafür! Ich hätte mal eine frage: wenn du mehrere klarlackschichten aufträgst mig zwischenschleifen um ein perfektes finish zu bekommen, wie lange lässt du den klarlack vor dem schleifen durchhärten? Ps:hab mein bike in anlehnung an dein gulf bike lackiert letzen winter, leider alles mit spraydose mangels lackierpistole, ist aber trotzdem toll geworden :) die idee hier lässt meine fingee aber schon wieder jucken ;)

@Hayes Otis This has nothing to do with the painting techniques in this video. Go somewhere else with your SCAMS!

@Stetson Lewis nice second account

we call it Cling Film, not foil or wrap , in UK. Great vid )

Forged Carbon oO?

ya i got yelled at.... nothing new lol....

Meh,.... They're all using little automatic preset cheap chinese torque wrenches ....

I only know Wayne Manor.

Yes please check the footage of the paint booth with the frame on the table. You can see the masking tape inside the head tube.

The airbrush he uses is definitely better. A spray can is really just a portable airbrush. The real thing is always better.

Yes.

Always better than a french speaking in english ^^

In diesem Video zeige ich wie die Dekore gemacht werden: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VvVZoGp8OeA.html

William when using scotch brite (the scouring pad type abrasives) you can apply a small amount of pressure. Maybe a couple of pounds. (Get a rough idea by pressing on some scales). When using sandpaper it’s important to avoid clogging as the small consolidations of sanded paint that gather on the paper can leave scratches in the preped surface that will show in the new paint. The best way is to use very little pressure and dust the paper off every few seconds of rubbing. If you’re pressing too hard the dust will clog. To check you haven’t missed any areas give the sanded area a wipe with a cloth and look for areas that are still shiny. Also try to avoid running you’re hand lengthways as this can leave finger shaped low areas . A diagonal movement in 2 directions to form an x shape is best. Have a look at automotive paint prep videos. Hope that helps.

@William please check my video for all information I can give you about sanding: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IiqWy-JXB74.html

just imagine yer old lady is rubing it up and down on the ole pogo schtick....

Did you sand in between ?

@@marcelopajueloarteaga814 Of coarse, and also sanded the gold also to reduce the stepped effect of the clear coats. This also softened the gold effect so that it didn’t jump out that strongly. I was going for subtlety.

​@@frankkiss3701hello dear need a help could you guide me for some problems

I’ll try to help.

@@frankkiss3701 i have problem with stencils some time it lift the base coat. It is necessary to spray a clear coat over base before spraying stencils or can directly paste stencils and spray them over base coat ?

Ja ich arbeite an Kundenrahmen. Bitte schreibe mich dafür über meine Webseite an. www.etoe.de

Paint away from the tape

Paint away from the tape, if you paint towards the masking tape then it will leave a raised edge

No..what i mean is after removing the masking tape over the letters..( There's now no masking tape on th bike)... You are ready to clearcoat...there is sometimes a raised edge from the last colour on top of the letters ..you can see it when he removes the "R" it's this edge that either sticks up due to removal of tape or has a very slight raised edge due to thickness..if the letters masked are small i can't see how it's possible to paint away from tape in all directions..thanks for reply

Wet sand 1500 and use real clear coat not rattle can it lays out thicker you don’t need to get it all the way smooth before clear you just want to break the edge

Patrick Caresosa hydro dipping a frame would take for ever, the masking tape will come off, where will you hold the frame once it out of the water. THINK BRO

@@davidshelly5116 instead of masking tape, you could use plugs. Have an anchor on one plug which you can use to hang the frame for drying. That said, this custom paint job is still better.

I'm not able to save for retirement so I have to die young. No need for googles.

At a local shop 19 kilometer from my studio.

Yes.

Hes used green loctite now so good luck to the next person trying to undo it 😄

@@mark675 not a drama ... same as above just heat the area and the loctite will deteriorate.