Painting German camouflage - Great airbrush set - NEOECO NCT-SJ83 Gravity Feed Dual Action Airbrush 

I always love when creators actually give an honest review on products,although getting the product for a trybut for free!I also love the camouflage you painted on your halftrack.This might inspire me for a project I was planning from a while.Thanks Stu!

NEOECO also has a set with a small compressor. The whole package was around 100€. On Amazon there's usually a similar package with Fengda or so on. I've been mulling this and that set over for a long time and I'm sort of leaning towards this.

Well done and genuine review! Very close to what a random user might experience. Good work. I’m actually thinking of getting this one, I have a H&S, too. A small side note: if you want a thin layer of Dunkelgelb, don’t spray it over black. Use red oxide primer color instead. Than the real in real colors will be on a whole different level!

Perfect timing, I've been attempting a come back to modeling for quite some time. The learning curve has been steeper than anticipated getting to know the volume if supplies available. . I should have checked my air brushes first. I'm ready to starting painting and have discovered my air brushes and compressor were probably used by Michael Angelo . Its probably going to be best to invest in something new like this airbrush and pressure controlled compressor than search for new parts and hoses on my old equipment. I organized my old stash and discovered lots of paint mules.so I'm almost there. So thanks for this video its definitely going to help. CHEERS from the colonies.

Waiting for mine to arrive to complement my Sparmax 0.2 and Iwata. Every review I've seen thus far has been very positive. Can't wait to try it out!

Love mine! No problems so far, been a year now. Does what i need it to do.

Thank you for this review.🖌

Thank you for this Video. Great review of a product I've been seeing lately . I want a second airbrush for detail work, so it's good seeing a honest review

Hi Stu great video, I got one these out in Saudi as a back up it comes with a hose as well, super value, cheers Liam

Looks good!

Great demonstration Stu, I have never bought a leading brand airbrush, I'm currently using an airbrush from Border Model, it does a great job and is just under $80-00 AUD, might have to try these out and save some money, more towards the stash...

I did the same thing when I changed to the .2mm needle and nozzle. It took a bit to figure out that I didn"t have the capp tight enough.

I got one of these airbrushes in a set with a usb compressor. Both are surprisingly good for £50 total spent. Two issues I've had with the airbrush: 1: the thread stripped in the black part for the needle backstop. I fixed this by wrapping some foil tape around the backstop screw, which gave it just enough bite to work again. 2: using acrylics, I've found the nozzle a bit difficult to fully clean, because of its depth.

Thanks for the review MN! Does the airbrush conform to the Iwata brand compressor?

I an looking to get a new airbrush, I bought my first and current one on the recommendation of someone on youtube ironically and results have been sporadic from the start, I certainly would not recommend it. I have done a few models with it but sometimes it refuses to work as it should, so at the price of the Neoeco and others such as Fengda Ishall be looking to change very soon, thanks for your review.

Putting needle in backwards - great tip! (Pardon the pun)

That's a very good review and I think for the money that is a bloody good airbrush kit. One minor criticism for me is that it appears a little chunky, especially with that bell end nozzle. Having used airbrushes for many years I would say there are four things in the acid test with dual action airbrushes. The first is a really progressive flow of paint as the trigger is pulled back, the worst case scenario is pulling back on the trigger and getting no flow of paint and then suddenly a lot of paint. An airbrush that does this is rubbish. The second fault is spatter when doing small spots or fine lines. An airbrush that does this is no good for fine detail work. The third is the paint drying in the nozzle when doing fine work with very little paint flow, like small spots, so you are getting the air flowing and pulling back very slowly for paint and nothing comes out or initially paint flows then stops. Usually if you take the airbrush off the work and pull right back for paint it usually will start flowing again but if you are using the trigger limiter this problem is a real pain. The fourth issue is when an airbrush gives a little spot or short flow of paint when the trigger is just pressed for air. Alternatively the paint is not fully shutting off. This again is a real pain for detail work. You could say some of these faults like spattering or the nozzle drying off is down to paint preparation but I would say that if an airbrush is very sensitive to paint thinning then it is a bit of a pain. If the paint has to be very thin then it can easily run or fail to cover well.

Are those seals lacquer proof?..

I bought one of these a few weeks ago off Amazon and truthfully their not that good it just doesn't lay paint down smooth

Great kit. The price is amazing for what you get. Really good quality and many options, unlike a lot of higher end kits. Also, so many I see complain airbrushing is expensive, usually due to the 85-160.00 Air brush kits. Compressors are easy to get, some already with regulators. Just picked up one from Amazon today, it also comes in RED.. Cheers!

Looks like a decent product for the money Bit of a play on words with the name isn't it Iwata Neo & Neoeco

Beginner airbrush???

Hi I am very intrigued by this airbrush ,, as a guy who follows you, I was looking for a decent price air brush.. I am ordering it from Amazon tonight

👁👁

72 quid on amazon rip off

Hi Stu, the features offered look like a good value. Maybe a follow up after some hours of use to see how it still performs. Ease of cleaning, needle damage etc. Thanks for the product review.