Тёмный

Painting my Garage Floor with 1 Part Epoxy 

Laser Engraving with Matt
Подписаться 21 тыс.
Просмотров 151 тыс.
50% 1

Today I'm showing you How to apply 1 Part Epoxy on my Garage floor.
Hi, I'm Matt along with my wife, Sara and our 4 kids we are fulfilling our dreams of becoming more self-reliant. We support our dream by working from home running our laser engraving business.
Join our Private Group for
1 On 1 Phone calls with Matt & a Monthly Group Chat:
/ laserengravingwithmatt
Etsy shop with SVG & PDF files for sale, EngravingwithMatt: www.etsy.com/shop/Engravingwi...
Join us Fridays for new videos!🌻
Check out our vlog channel, @Matt & Sara (New videos weekly): / @mattsara2802
Don't forget to LIKE, COMMENT & SUBSCRIBE!
Click that 🔔 to be notified when our next video comes out!
Matt & Sara
Shop our favorites:
Laser Dark: www.laserdark.com/order
Transfer Tape: amzn.to/3TjUHKo
Brilliance Spray: amzn.to/3LVTp84
Ruler: amzn.to/443IkIN
Caliper: amzn.to/436a3ap
Business Cards: amzn.to/3pgtuzr
JDS Patches: shop.jdsindustries.com
Item #PTHSET3A
Awesome Hats: amzn.to/3qLluGX
Cermark Black Spray: amzn.to/3qqndkM
Blue Tape: amzn.to/3qASP7z
Mactron Laser: mactron.aliexpress.us/store/g...
Desk: Use my code【YTB15】for an extra 15% OFF over $500!
For CAN buyers, use my code to get $50 OFF over $500!
US site: bit.ly/3LhfYUC
CAN site: bit.ly/3JA6BOQ
Keyboard: amzn.to/3FB1MCm
Etsy Search Engine tool: salesamurai.io/.
Use Coupon Code: MATT20 for 20% off
Sanding Disks for glass: amzn.to/2JCm9W4
Laser Clamp Pins: www.etsy.com/listing/13720156...
New Laser: www.thunderlaserusa.com/machines
xTool (Diode Starter Laser): www.xtool.com/?ref=w86Oew0Jk4...
Best book for beginning your business (Hard copy or audio): amzn.to/3ehpGZ1
3D Printer: s.zbanx.com/r/bjgWdKwKDDxY
ref=w86Oew0Jk4nD&
Powder Paint: amzn.to/3Nhq5qS
Gasket Making Material: amzn.to/3ls4C2h
Blue Tape: amzn.to/3FNzS3a
My favorite LA's Totally Awesome Degreaser: amzn.to/3tGhmaT
Super Clean Degreaser: amzn.to/3oIvBt5
M8 Fan: amzn.to/2Z08qQr
External Hard Drive: amzn.to/32OVoqy
Cermark: amzn.to/3EKxbAj
Bottle Openers: amzn.to/3i1xsoS
Dusting Spray: amzn.to/3znltIM
Rubbing Alcohol: amzn.to/3Bv3OQb
Q-tips: amzn.to/3BihFZK
💡 Lightbox : amzn.to/31h1GLC
Corel Draw Software: amzn.to/3pG3wzW
Sandpaper Blocks: amzn.to/3pVQVrV
Clear Coat: amzn.to/2LOM3qr
🖨️ Our favorite label printer the Rollo: amzn.to/2IVCVyV
🏷️ Flat 4x6 labels compatible with the Rollo printer: amzn.to/3pMawvO
📸 Camera: amzn.to/3iuYsLE
🔺 Tripod: amzn.to/2QgipJM
Scale: amzn.to/37IE2L7
Drop us a line ...
Matt & Sara
PO Box 9
Carver, MN 55315
Send Business Inquiries to: homesteadingyt@gmail.com
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that we provide we may receive a small commission. There is no additional charge to you! Thank you for supporting us so we can continue to provide you with free content each week!
Music: Courtesy of Epidemic Sound
#laserengravingbusiness #laserengraving #laserengravingforbeginners

Хобби

Опубликовано:

 

9 окт 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 159   
@whitestone4401
@whitestone4401 8 месяцев назад
Well done. We did this for my Dad for Father's Day years ago. He loved it.
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Thanks. That’s awesome
@Thwompcrew
@Thwompcrew Месяц назад
Would love to see a 6month, 1 year update on this. My biggest deterrent for doing it myself is all the flack that pros give on how weak the DIY system is.
@laserengravingwithmatt
@laserengravingwithmatt Месяц назад
I will so far it has been great.
@n00bstacle
@n00bstacle 2 месяца назад
You made it look easy. I may have to do this at some point with my garage
@milleniumann28
@milleniumann28 4 месяца назад
You should be proud of that outcome! Looks amazing.
@laserengravingwithmatt
@laserengravingwithmatt 4 месяца назад
Is definitely am 😃 thanks.
@bbrown5887
@bbrown5887 20 дней назад
Great Job. Tons of bad reviews out there about this and similar one part epoxy paints. The products work but most of the failures are die to bad prep. Any stains need a degreaser product and solid cleaning. Then when dry a good etching. Then make sure it is very dry before bonding coat and then make sure that’s dry. Most people skip, cheat or are impatient causing the failures.
@laserengravingwithmatt
@laserengravingwithmatt 9 дней назад
AMEN BROTHER
@davidcatuna2965
@davidcatuna2965 2 месяца назад
Perfect 👍! Thank you Matt .
@Pwpapa.7
@Pwpapa.7 2 месяца назад
Looks good thanks for sharing it with us
@watercop5115
@watercop5115 6 месяцев назад
Absolutely awesome. NOW, I have a mission. Great job brother Thanks for sharing...
@laserengravingwithmatt
@laserengravingwithmatt 6 месяцев назад
👍😃
@dumhic
@dumhic 2 месяца назад
I used this coating twice, my biggest complaint is over time (3-6 months) the epoxy breaks down from warm tires and that section peels up. My next plan is industrial epoxy 2 part system this summer. I am glad this one benefited you 👍
@user-qr1sn3hf6e
@user-qr1sn3hf6e 2 месяца назад
Matt you ROCK!!! Your garage looks awesome. I plan to do my basement/walkout and this video was very helpful!!
@laserengravingwithmatt
@laserengravingwithmatt 2 месяца назад
Thanks 😊
@thesplinteredfinger
@thesplinteredfinger 8 месяцев назад
Looks great! And you are correct, the prep is the key. When I did mine I did not intend on putting the cars back in so I went with a rubber floor. Keeps the cold of the concrete out. You may want to make sure your garage doors are insulated.
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Thanks 😃. Yup did that 13 years ago. All good
@vilikarac6776
@vilikarac6776 3 месяца назад
Sorry but i find most of the home depot guys are clueless
@charlesholliday1013
@charlesholliday1013 3 месяца назад
Dude. Thank you so much. I'm building an elevated home and will have about 1500 sqft of area in the garage. I was looking at some professiobal options and they were between $7 and $9 per sqft. I just didn't want to spend 15K on the floor. This seems to be a great option and I thank you for your step by step tutorial. Your finished product looks great!
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
Thanks. It still looks good as of today.
@thePersonGuise
@thePersonGuise 2 месяца назад
Flakes are good for hiding that shiny star washer that drops under the car from the bolt you can barely reach.
@rockymountainvalues4273
@rockymountainvalues4273 8 месяцев назад
That look's really nice Good Job love the grey and white
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Thanks 😃
@billsaflarski824
@billsaflarski824 8 месяцев назад
Looks real nice Matt !! congrats
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Thanks
@nannyi6166
@nannyi6166 День назад
Looks pretty good🙏
@minnesotamaker1846
@minnesotamaker1846 8 месяцев назад
Turned out really nice
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Thanks 😃
@northstarprepsteader
@northstarprepsteader 8 месяцев назад
That looks so great!!
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Thanks 😊
@kylegustaveson5345
@kylegustaveson5345 8 месяцев назад
Beautiful job Matt, you’re rockin. Can’t wait to see how it progresses. I’m stuck in a zoning and building dept loop for my shop build and looking like it’s not be done and up before snow comes 🤦‍♂️
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Thanks. That stinks
@bustermv
@bustermv 22 дня назад
Have an “Open Garage” party to celebrate. Gifts ok.
@jeffdannenbaum2159
@jeffdannenbaum2159 8 месяцев назад
LOOKS GREAT I need to redo my floors in my garage, weather has finally cooled down in Cypress, Tx
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Yeah it is worth it
@williamstauffer1542
@williamstauffer1542 8 месяцев назад
Phew!!! You wore me out watching this! I was able to polish off a cold one while I watched though, so all is not lost!😂
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
😂
@abdulraheemhasan6469
@abdulraheemhasan6469 Месяц назад
It looks hella good brother
@robertrohler3644
@robertrohler3644 3 месяца назад
Damn, that looks great - well done!
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
Thanks
@benjaminb3295
@benjaminb3295 2 дня назад
Great vid. I’m thinking about doing my basement workshop. Can I use paint in an are with little ventilation?
@dian3145
@dian3145 8 месяцев назад
A Wednesday bonus! Cool. It is looking sooo good. My muscles hurt for you 🤪
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Thanks 😄
@gilmaralvesdeoliveira420
@gilmaralvesdeoliveira420 2 месяца назад
Good job!
@laserengravingwithmatt
@laserengravingwithmatt 2 месяца назад
Thanks
@Hecvillanueva
@Hecvillanueva 3 месяца назад
Nice job👍
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
Thanks
@JusticFreedomFighter
@JusticFreedomFighter Месяц назад
Would love to know how it’s holding up today Matt. I just put it on my shop floor. I have my doubts but I still used it.
@laserengravingwithmatt
@laserengravingwithmatt Месяц назад
Still looks great
@ericacts238
@ericacts238 Месяц назад
Nice job
@laserengravingwithmatt
@laserengravingwithmatt Месяц назад
😃 thanks
@sajidrafique375
@sajidrafique375 12 дней назад
i saw another 1 part guy said that that the tires will destroy the 1 part paint
@davidelder5399
@davidelder5399 8 месяцев назад
Great job, Matt. I've just put down plyboard sheets with 5mm penny style rubber matting my space is much smaller than yours. I've just seen you have uploaded a video on ventilation. This is my next project for the Thunder. The outlet of the machine is 6" & the inlet on my purification cabinet is 4" the outlet from the purification cabinet is also 4" to then run outside. I'm not sure if 6" dropping to 4" would choke the system any advice would be greatly appreciated.
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Going from 6 to 4 I would think you won’t have enough pull
@davidelder5399
@davidelder5399 8 месяцев назад
@laserengravingwithmatt7833 That's what I thought. Back to the drawing board, at least I got an external air compressor sorted it showed up today. There's just not enough hours in a day. Thanks for the reply it's much appreciated. I know you guys have a bit on your plate it'll all be worth it in the end. Sending positive vibes from over the pond 🇬🇧
@victorsmalls
@victorsmalls 2 месяца назад
Great video. Enjoyed it. How has this been holing up to car tire wear? I have a 32x40 that I use as my wood shop but also park cars in there, thinking about doing this in my space.
@laserengravingwithmatt
@laserengravingwithmatt 2 месяца назад
It’s been holding up great. But I don’t park cars in it. It’s only used for my business so lots of foot traffic.
@MidwestMotor
@MidwestMotor 3 месяца назад
Great video!! Did you think about not using glitter? I'm trying to decide glitter or not. I like just the clean look - don't get me wrong it still looks awesome! Thanks for the video!
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
I did but I am so glade I did.
@marivera82
@marivera82 4 месяца назад
Looks really good 👍🏼 did you put a clear top coat?
@laserengravingwithmatt
@laserengravingwithmatt 4 месяца назад
Thanks. No I didn’t
@golfaddict75
@golfaddict75 3 месяца назад
Wondering just throwing the flakes on top, I’ve seen videos where they scrape off the loose flakes after and put clear coat over it. Are your flakes coming off when sweeping? Is the floor smooth or rough with flakes? Thanks this looks easier for sure!
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
The first time you sweep, there is loose flakes, but only a little bit and I feel like the flakes give it a grip. I never did a clearcoat after I was done because I don’t want it slippery.
@Don-ul6rx
@Don-ul6rx 3 месяца назад
You should have rented a floor buffing machine with red or brown Scotch Brite pads to scuff the floor. That's what I did in my basement in 1996 and the paint is still on the floor to this day.
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
Wow that’s awesome. So far it’s been great 👍
@theratgamer
@theratgamer 2 месяца назад
Looks great. Did the epoxy have strong fumes?
@laserengravingwithmatt
@laserengravingwithmatt 2 месяца назад
Thanks. No they didn’t but I had lots of fans going also
@joann5157
@joann5157 Месяц назад
Amazing job! Questions: Do you have to apply the epoxy paint within a certain time period? Can you put the lid back on the can and use the paint later or is it once it's open you must apply all of it?
@laserengravingwithmatt
@laserengravingwithmatt Месяц назад
Good question. I don’t know. I would think you can use it again.
@vincent33195
@vincent33195 4 месяца назад
I just had two coats of one part epoxy applied to my garage floor after the typical prepping, etc. it came out great but it is cold by me, and I’d like to add one or two more coats so I can add the flakes (that wasn’t done the first time). In a few months, can I simply go right over the epoxy we just applied? Second- did you apply the primer to the concrete walls or just the paint? Thanks and great video!
@laserengravingwithmatt
@laserengravingwithmatt 4 месяца назад
You need to read the back of the can I don’t think you can wait that long and yes I primed the side walls
@vincent33195
@vincent33195 4 месяца назад
@@laserengravingwithmatt Thanks brother!!!
@devontespencer5898
@devontespencer5898 6 месяцев назад
Hey Matt! Getting ready to do this in my garage. Hows it holding up?
@laserengravingwithmatt
@laserengravingwithmatt 6 месяцев назад
It’s been great so far. I love it. Make sure to clean the floor really good.
@inputflounder5322
@inputflounder5322 4 месяца назад
Hey, Matt What do you think about using this in a basement with a concrete floor. I'm a first time homeowner. Thanks!
@laserengravingwithmatt
@laserengravingwithmatt 4 месяца назад
It would be great. It’s still doing great in my shop.
@remikus
@remikus 3 месяца назад
can you do update 4 mon later? I did mine with behr and few weeks later looked like shit. soon I start parking cars (after week of waiting ) - all paint underneath the tires was gone. Its good for basement maybe...
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
I will do a one year. So far nothing is wrong with it. It has been great
@pirate_Z
@pirate_Z 3 месяца назад
Hey! How is it holding up? Any peeling or damage after a couple of months? Thanks !
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
It’s been great! No peeling and or damage. 😃
@abdulraheemhasan6469
@abdulraheemhasan6469 Месяц назад
I really want to see what this area looks like after you have updated it
@laserengravingwithmatt
@laserengravingwithmatt Месяц назад
I plan on doing a one year
@tanktexas
@tanktexas 3 месяца назад
I need to do this to. Thanks. How's it holding up
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
It’s doing great
@PatrickFischl
@PatrickFischl 5 месяцев назад
How’s it holding up 2 months later? Any damage from cars being parked on it?
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
It’s doing great. I don’t park in it because I run my business out of it.
@kunfusedassviet
@kunfusedassviet 4 месяца назад
Great job!! You have a list of materials?
@laserengravingwithmatt
@laserengravingwithmatt 4 месяца назад
I thought I put it all in the description
@kunfusedassviet
@kunfusedassviet 4 месяца назад
@@laserengravingwithmatt sorry, oversight, was at work and was not paying attention!! Thanks
@azizayahya5008
@azizayahya5008 Месяц назад
what is the ideal mix for acid to water? Also should I bite the bullet and get a rental grinder or will the acid do the trick?
@laserengravingwithmatt
@laserengravingwithmatt 9 дней назад
That’s what the directions say
@user-yh7ip1yh8i
@user-yh7ip1yh8i Месяц назад
Thanks for posting my man. Quick question: Could I put down some clear coat for more of a shine?
@laserengravingwithmatt
@laserengravingwithmatt Месяц назад
I don’t know 🤷‍♂️
@marcomendoza7502
@marcomendoza7502 2 дня назад
You can add a clear coat and also I would add slip resistant additive so I won’t be too slick and slippery.
@thecomposedcanineclaiborne9591
@thecomposedcanineclaiborne9591 Месяц назад
Do the flakes add friction? Looking to do this at my dog training facility if there's enough traction
@laserengravingwithmatt
@laserengravingwithmatt Месяц назад
Yes not a ton but more than a painted floor
@g0chavez
@g0chavez 8 месяцев назад
🔥🔥🔥
@HatGuy2022
@HatGuy2022 2 месяца назад
Updates? Diamond blades or acid edger?
@laserengravingwithmatt
@laserengravingwithmatt 2 месяца назад
Still looks great and acid edger
@HatGuy2022
@HatGuy2022 2 месяца назад
Did you use the one that comes with the kit?​@@laserengravingwithmatt
@davidcatuna2965
@davidcatuna2965 2 месяца назад
Can you list the Materials I need ( cleaning supplies and paint Epoxy etc. ) please.
@laserengravingwithmatt
@laserengravingwithmatt 2 месяца назад
It should all be in the description
@gordonmacwan1739
@gordonmacwan1739 3 месяца назад
Could you share the products you used.
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
Everything was in the video and in the description 😃
@SlotDropMarc
@SlotDropMarc 4 месяца назад
Any peeling now thats its been a few months? There are some bad reviews on Home Depots site. Maybe the bad reviews are from people that cut corners. Thanks
@laserengravingwithmatt
@laserengravingwithmatt 4 месяца назад
It’s is awesome so far. I will do a one year review this summer. I think you are absolutely right. I don’t think they did it right. I have lots of heavy stuff moving around in here and it still looks amazing
@user-nc5ee7el8r
@user-nc5ee7el8r 2 месяца назад
What primer did you use?
@blastsprinter
@blastsprinter 2 месяца назад
BEHR PREMIUM® CONCRETE & MASONRY BONDING PRIMER
@jerryebanks4677
@jerryebanks4677 Месяц назад
what are the name of the items you used in this video. Sites i can get them
@laserengravingwithmatt
@laserengravingwithmatt Месяц назад
They are in the description
@johnyoderarvada
@johnyoderarvada 25 дней назад
Don’t see materials (primer, type of epoxy, etch, etc. in the description
@joekloiber887
@joekloiber887 3 месяца назад
Can you clear coat the floor? I see people doing that after the chips. Looks great though
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
I am sure you can. I just don’t want it slippery.
@marcomendoza7502
@marcomendoza7502 2 дня назад
You can also add the non slip additive, there is a cheaper 50$ buck clear gallon one or the 160$ clear coat one … I’ve read better reviews on the more expensive one but I don’t think you can mix the single epoxy paint with then the 2 part epoxy clear coat
@bobb8423
@bobb8423 3 месяца назад
What was total cost I apologize if I missed it.
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
I am sorry if memory serves me right it was a little over 300
@jasonmacdonald27
@jasonmacdonald27 Месяц назад
I didn't even mix it with water for my floors
@CastleHives
@CastleHives 8 месяцев назад
That looks great Matt. . So now when I have a project similar, you can just come to Ohio? LOL
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Thanks. 😆 that would be fun
@williamprezioso2742
@williamprezioso2742 3 месяца назад
How about a four month review? Does it still look good?
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
I plan on doing a one year review. But so far nothing wrong yet 😃
@williamprezioso2742
@williamprezioso2742 3 месяца назад
Thanks I put recoat on today epoxyshield tomorrow then rock solid clearcoat
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
Nice 😃
@waynebeck7801
@waynebeck7801 2 месяца назад
What is the square footage of your floor?
@laserengravingwithmatt
@laserengravingwithmatt 2 месяца назад
27’x27’
@rafaelrodriguez442
@rafaelrodriguez442 8 месяцев назад
Nice job. So how much money would you say you spent to get it done?
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
It was 275
@Miketheconservative
@Miketheconservative 3 месяца назад
The “cracks” in the floor are there for a reason. Probably should have never filled them in. Other than that it looks pretty good.
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
I know they are relief cracks is just fine to fill in with cock. You do not want to fill in with anything hard.
@XxMissingDataxX
@XxMissingDataxX 2 месяца назад
No gloss?
@laserengravingwithmatt
@laserengravingwithmatt 2 месяца назад
Nope
@aznycts
@aznycts Месяц назад
Great Job Man 👋👋💪👍 . Now you hot yourself a Man Cave. 75in Tv Fridge and Some 🍺🍺🍺 😆 but You Deserve it .
@laserengravingwithmatt
@laserengravingwithmatt Месяц назад
😃
@pnwoutdoors8873
@pnwoutdoors8873 3 месяца назад
You Canadian?
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
Nope Minnesota 😃
@williamprezioso2742
@williamprezioso2742 3 месяца назад
You we’re smart not to do the side walls with epoxy you need every drop you have for the floor in most cases, you can always do the side walls with a color matched porcelain and deck paint cause nobody’s gonna walk or drive on your walls (Pro tip)
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
😃
@ryanking4942
@ryanking4942 5 месяцев назад
You seem like a guy I could drink a beer with lol
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
😃
@oberschultz60
@oberschultz60 3 месяца назад
Look good, congrats.. but you need to use GOOD mask , because those chemical isn't good buddy .! 🤔🤪😵😎👏
@BLEEDBLUE222
@BLEEDBLUE222 2 месяца назад
Should I put the c*** in filled the cracks before you paint?But it still looks good
@laserengravingwithmatt
@laserengravingwithmatt 2 месяца назад
I didn’t because I think the paint will peel
@sparky5267
@sparky5267 Месяц назад
You have to grind that nasty concrete for good results otherwise it’s just a gamble
@laserengravingwithmatt
@laserengravingwithmatt 9 дней назад
It worked good on my end
@jasnapon
@jasnapon 3 месяца назад
You should have ground the surface slightly with a floor sander with a80 grit sanding pad 🤣
@laserengravingwithmatt
@laserengravingwithmatt 3 месяца назад
No need because I used an acid.
@user-gx1tu9yi2t
@user-gx1tu9yi2t 8 месяцев назад
Sweeet!
@josepalacios81
@josepalacios81 8 месяцев назад
My brother is a professional water proofer the stuff from Homedepot will not last. There’s better.
@laserengravingwithmatt
@laserengravingwithmatt 8 месяцев назад
Well it’s on there now no time to take it off. You should’ve said something sooner.
@MrHermangv
@MrHermangv 6 месяцев назад
lol
@genericusernaization
@genericusernaization 4 месяца назад
Pointless comment. What's better?
@HENSLEYDMB
@HENSLEYDMB 3 месяца назад
I have a business doing polyurea/polyaspartic one day floors in Indiana. From our experience acid just does not do enough of a prep to maintain a good bond. We grind, and use complete flake system and it will last 10-20 years with no issues. Proper prep is key and using good materials. Yes it costs more money to do it right, I think we all understand that.
@HENSLEYDMB
@HENSLEYDMB 3 месяца назад
Also, we would use about 130 pounds of flake on that size floor for comparison. There really is no way to do it cheap and make it last. As soon as you park a car in there that epoxy will pop off. I know you said you are not parking cars in so maybe it will last a bit. Good luck and thanks for the video.
@stephanieguthrie5547
@stephanieguthrie5547 27 дней назад
The accent is hell
@laserengravingwithmatt
@laserengravingwithmatt 9 дней назад
🤣🤙😂
Далее
New Garage Floors for $100 dollars Eagle Gloss Sealer
10:09
You are being MISLED about EPOXY GARAGE FLOORS...
7:16
Epoxy Garage Floor Install - Entire Process
7:51
Просмотров 311 тыс.
DIY Garage Floor Epoxy Coating
16:24
Просмотров 1,2 млн
How I upgraded my garage floor (HUGE Difference)
15:46
Туристы и шведский стол
0:31
Просмотров 7 млн
Тг канал: lorxxix🤩💓 #dance
0:11
Просмотров 1,2 млн