Painting the Frame and a SURPRISE DELIVERY!! | 1993 Chevrolet DUALLY PACE TRUCK 

I've done 2 frames with the Eastwood paint with a brush. One was a 1970 C-10, so I pulled the bed off at least. 2nd was my 94 Blazer with everything in place. But I had a 4 post lift to work from, so it wasn't too bad. You do what you have to do to get stuff done.

Absolutely not a waste of time as it’ll help prevent rust plus makes it look cleaner. It also shows you give a crap and took your time making it look that much better

I did mine two years ago. Took me 9 hours to do one side! I did the other side the next day....took the same amount of time. I just had some surface rust, that's what took the most time. Looks way better than it did before. 😊

Gotta do what you gotta do! I recently rattle can blacked my wheel wells, inner fenders and front suspension with leftover black engine paint for now just because they looked embarrassing behind my milled Alcoa 22s. I still need to do the frame rails, at least the visible outside part! If you are going. A 5/7. Static you will tuck the upper edge of the tires slightly in the rear, and there is some clearance for that. but if you are going air you will probably need a chassis cab rear or extended fenders. In the front there isn’t a lot of tire to fender clearance, mine have effectively self rolled the Denali fenders over bumps but no issue with turning radius. It’s still only about as tight as the Nimitz. And there isn’t a lot of clearance to top of the inner fenders/ wheel wells. The occasional pot hole or whoopty-whoop means the bottoms of the inner fenders hit the tires enough to make terrible Noises and take the paint off. Just be aware of it and try not to bottom out on the tires! Best of luck and enjoying following along.

my favorite truck, been wanting to get an old OBS dually myself. Got a NBS Sierra, bout to do this myself with por 15

Looks wayyy better. I hate rusted frames lol. I did all my trucks with POR15 and a paint brush. Less mess imo but yours came out amazing.

Where did you get that cluster?

It always rains when I want to paint something lol.

Oh this is cool. May be stealing the pace truck idea with mine. I've got a 1994 (wrong year I know.... lol) but I also have a 1979 Mustang Pacecar. Would be pretty cool visually towing a Pacecar with a Pace Truck

bout to do my truck but noticed you didnt use primer, any issues showing without using it? i will be rolling/brushing eastwood on

I love your unedited content. I’m pretty sure we are brothers, because I do the same crap all the time lol.

i love this truck so much

I wouldve prolly removed the bed if at all possible. Im going to be doing something very similar on my 91 extended cab soon. Its not a frame off but id like to detail up the chassis some and make look nicer for sure

Definitely would've TRIED with the bed off but at least you're doing it. Little by little, however you can get it done, right?