Plastic model # Maschinen Krieger # KowYokoyagama # PLAMODELDAYS
This is the 6th production video of Maschinen Krieger "Raccoon" 1/20 plastic model (WAVE).
We are in the process of painting.
・It supports multilingual subtitles. If you are overseas, please turn on the subtitle function. [CC] Mark ON
- 4K image quality. If the communication environment is good, you can view in 4K image quality.
↓ Please take a look at the previous production video.
① [Ma.K.] Raccoon! Unboxing review, temporary assembly, manipulator remodeling There was an accident, but this is a Maschinen Krieger plastic model production video! [Maschinen Krieger]
• 【Ma.K.】ラクーン!開封レビュー・仮組み...
(2) [Ma.K.] Raccoon screw mounting detail improvement work Erasing joints Maschinen Krieger WAVE plastic model production video! [Maschinen Krieger]
• 【Ma.K.】ラクーン ビス取り付けディテー...
③ [Ma.K.] Hatch Movable Work Great Difficulty Raccoon Maschinen Krieger WAVE plastic model production video! [Maschinen Krieger]
• 【Ma.K.】ハッチ可動工作大苦戦 ラクーン...
④ [Ma.K.] Completion of work and painting Chamfering bit review Raccoon Maschinen Krieger WAVE plastic model production video ④ [Maschinen Krieger]
• 【Ma.K.】工作完了そして塗装へ 面取りビ...
⑤ Paint the manipulator! Ma.K. Raccoon Plastic Model Production Video 5: Painting [Maschinen Krieger]
• マニピュレータを塗装せよ! Ma.K. ラク...
Please feel free to send us channel registration, evaluation button, comments, questions, etc.
Please see below for kits to use.
[Use kit]
S.A.F.S. type R Raccoon
■Plastic model kit
■ 1/20 scale
■ Snap-fit type that does not require adhesive
■ Marking decal included
■ Appearance work: Maschinen Krieger
■ Product code: MK-069
amzn.to/3QZJPAB
It's a good kit that's easy to make.
Drilling is required, so it is convenient to have a pin vise, or a drilling tool is almost essential.
Although it is a snap fit kit (no glue required), it is easier to glue it depending on the location.
Mr. Weathering Color Stain Brown 40ml
amzn.to/3g66Kgz
• Video
↑This is the video I used as a reference when making the hinge.
↓It is a material for making hinges.
Stainless wire 400×0.5mm SM400-05
amzn.to/3DAg3Pm
Wave NEW C・Pipe B Set
amzn.to/3eYY6jk
SAFS joint mods
amzn.to/3AO9hCJ
Pink Tank: Modified parts by PINKTANK.
This is what is said to be short in the video.
I often use it because I can create a silhouette that looks like a WAVE suit with a lower center of gravity.
[Tools and tools used]
Electric file Ultima 5
amzn.to/3Ahhv5U
If you don't have this, the work time and the degree of loss of concentration will be different.
it's recommended. It's a little pricey, but it's worth it.
God Yasu
amzn.to/3QZeG0m
Works well with the Altima 5.
When using other sponge files, the sponge often broke and did not work well.
Suitable for wet sanding
Nippers God Hand
amzn.to/3KiRhVy
Nippers are god hands.
I use nippers for beginners. The one with the Keroro Gunso logo looks like a pre-value, so it's good for beginners.
Higher is better, of course.
Tamiya Craft Tool Series No.94 Precision Saw
amzn.to/3KTxA6T
It is an etching saw that cut off the finger parts in the video.
It's just that I can't use it, but as a tool it's excellent and sharp.
It can also be used for resin streaks.
pin vise
It is convenient to have one large and one small.
Fierce men have a few millimeters of the tip
Gradually, the chuck (mounting part) became loose, so I bought a new one this time.
Tamiya Craft Tool Series No.50 Precision Pin Vise
amzn.to/3wY4NbE
Tamiya Craft Tool Series No.112 Precision Pin Vise D-R
amzn.to/3wWwf9s
Tamiya Craft Tool Extra Fine Drill Blade Set 74044
amzn.to/3QieCYN
Tamiya Craft Tool Series No.108 Precision Tweezers (Round Tip/Twin Neck Type)
amzn.to/3THTPkc
It is the tweezers that missed the code in the video.
The tweezers themselves are also very good.
It's just that I don't know how to use it. Near the end of life.
Adler's Nest Extra Fine Lead Wire Diameter 0.65mm (White) 2m
amzn.to/3QhaIzl
Very thin code.
I often use.
Tetra brass wire 0.5 x 250 mm 10 pieces
amzn.to/3TL6nra
It is easy to bend and creates a delicate atmosphere, so I use it a lot.
In the 1/20 world, is it 1 cm in diameter?
chamfer bit
shop.godhandto...
Direct sales limited to God Hand.
In the past, individual Haikyu parts cost a few hundred yen, but there are very few of them on the market, and even if they do, they are priced at a premium.
You can buy God Hand's chamfering bit set at a price that is about the premium price, so this is a better deal.
HiQ Parts Minus Mold 2
amzn.to/3cZhpIU
Detail up parts for the screws used in the video.
There are various sizes, so I'm not sure, but in the video, I used one with a head diameter of 1mm to 2mm.
29 авг 2024