PARKSIDE Problem Solved for The Smart Battery 8Ah 4Ah

Подписаться 90 тыс.

Просмотров 41 тыс.

50% 1

Here you can see the products which i used in this video
BMS for PAP 20 A1, PAP 20 A3 for Parkside 20V Team Power Tool Battery
s.click.aliexp...
Battery Capacity Test Power Level
s.click.aliexp...
Heatsink Plaster
s.click.aliexp...
- Nickel tape
AliExpress s.click.aliexp...
In this video I will show how to repair an 8 Ah Smart Battery from Parkside.
All the cells show an equal voltage and are charged, so this is not the reason why the battery does not work.
The problem is the BMS which is blocked and no longer gives a signal to the charger or drill
Thanks for watching . And do not forget, Like and Subscribe
Due to factors beyond the control of CMC DIY, it can not guarantee against unauthorized modifications of this information or improper use of this information. CMC DIY assumes no liability for property damage or damage incurred as a result of any of the information contained in this video. CMC DIY recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of CMC DIY, no information contained in this video will create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from the improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not CMC DIY.

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@CMCdiy 9 дней назад

Here you can see the products which i used in this video BMS for PAP 20 A1, PAP 20 A3 for Parkside 20V Team Power Tool Battery s.click.aliexpress.com/e/_DFi... Battery Capacity Test Power Level s.click.aliexpress.com/e/_DeD... Heatsink Plaster s.click.aliexpress.com/e/_Dcw... - Nickel tape s.click.aliexpress.com/e/_DEh...

@aritani2883 Год назад

wow cool!!!! 🥰 thank you my friend 🙏your youtube channel good contents 👍 happy day 💓

@CMCdiy Год назад

Thanks my friend

@alyvproduction Год назад

Really interresting video CMC great job 👍

@CMCdiy Год назад

Thank you

@ZENYOFFICIALCHANNEL Год назад

Wow nice tutorial host I wish I know how about battery and electric thing hehehe

@CMCdiy Год назад

Thank you 😉🙃

@orlatris96 Год назад

Olá amigo. Por favor diga-me se esta troca de bms, tem resultado bem? A bateria continua a funcionar bem? Obrigado

@CMCdiy Год назад

Hi my friend . It works perfectly, just like a classic 2-4Ah battery, only this one is 8Ah with a classic BMS plate, No SMART, and I think it is more durable. As the difference, the classic ones use 18650 cells and the Smart uses 21700 cells

@londoncity1 Год назад

Good tip. Thank you 🙏

@CMCdiy Год назад

Glad it was helpful!🤗

@Headcase0570 3 месяца назад

I've recently purchased two 8Ah smart batteries but I keep running into an issue with them. I use both of them on the battery-powered grass mower (Parkside PRMA 40-Li C1 IAN420347). Intermittently, the mower will stop being powered by them. You can actually hear the mower blade speed ramping down a step before cut-off. Trying to start the mower again, it'll cut off within 3 seconds. Looking at the Parkside app, the batteries have 0 minutes runtime (despite having been used), aren't overheated (can confirm by touching?) and have a percentage remaining above 80%. Leaving the mower and batteries alone for some time will result in a longer period before cut-off again. I suspect either a thermal issue or bad cells.

@greenseamussel8018 Год назад

Hi, this green-red LED is on problem I have found after refreshing the firmware. The blue line runs till the end during refreshing the firmware, but after it the app wrote: mistake during the refreshing. I do not want to replace the BMS to the 4 Ah old BMS, I want to reset the BMS somehow to use the battery as it was earlier. Can I do anything to reset it? Or how can I solve this problem without changing the BMS to an old 4 Ah battery BMS?

@CMCdiy Год назад

Hi I think the only solution is a new software, the battery if it is under warranty or not go to the authorized Parkside service for resetting

@supriyo3610 Год назад

WONDERFUL Thank you 🙏

@nikolaydodev Год назад

Did you try to just reconnect the original BMS to the battery stack? Maybe disconnecting and reconnecting it will force to restart.

@CMCdiy Год назад

Hi, I tried this too, but without results, the same problem, the red and yellow leds are permanently on

@orlatris96 9 месяцев назад

Excelente, obrigado

@06akif-bhv 5 месяцев назад

Gibt es eine Möglichkeit eine Spannungsanzeige zu installieren statt einer LED Anzeige. Ich würde gern wissen wieviel Volt der Akku noch hat.

@amerikanoss1 10 месяцев назад

WHERE DID YOU GET THE MEASURING INSTRUMENT I WANT TO GET A TEST METER

@NoRoads2AllRoads Год назад

Nice where can you get one of those 8Ah?

@olidevil6666 Год назад

Salut tu as pris exemple sur ma vidéo ou tu l.avais déjà fait avant ?

@CMCdiy Год назад

Hi Oli I started this project a long time ago but I didn't have time to edit it. Then when I searched for a title I also found you. You did a wonderful job and you are very dedicated in what you do.

@olidevil6666 Год назад

@@CMCdiy j ai fais exactement la même chose avec le même affichage de niveau 🙂

@CMCdiy Год назад

I also saw the method with the burnt resistance. If I get another smart battery, I will study this solution. 🤗😉👍

@MrKopko2 Год назад

Smart batt Smart move Lidl make more money

@marianslovak856 8 месяцев назад

How about unblocking that BMS instead of just using those batteries? You lost smart functions with this "repair" Here is the fix: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Gx253hTSvsI.html