Part 1, How to make a silicone caulking mold 

@jazzyj2182 This is a tutorial for how to make a diy silicone mold. 🧐 I’ve no idea what your comment has to do with that. I needed a replacement part for my suitcase, unless you’re going to buy me a new suitcase, keep your unhinged and uncalled for comments to yourself.

If that's what you wanna call it yes, just make sure it's cured gòðd no bad smells comment from it.

Go to GEO Sustainable channel; he has a ton of useful information and tutorials on homemade silicone molds, including food safe.

Don't kno if this is to late because u asked 6 months ago but you can get food safe silicone and use cornstarch for casting fondant decorations

yes

the soap prevents the silicone from sticking to your hands, wether or not your using latex gloves to process

@@hopibreton2124 Nope, it is to catalyze the silicone, the soap you use must contain glycerine in order for it to catalyze the silicone

make a mold by another materials like clays, divided into two pieces, and let it harden separated without the hand in the mold? Its not possible to stay with no movements and shaking for so long time of hardaning... But you have to test the material for a mold, if it does not shrink or change the shape in corners.

you can coat the item with separator like to spray with silicone oil. Then place the item inside some box or so like form area and cover the 5 sides with oil separator too. Best to fix the item by two wooden pieces or so. Fill the first half (bottom) of item in the form area with resin epoxy, let it harden. After a day, coat the hardened epoxy with silicone oil spray too, make sure the item is well coated too. And finally fill the box or form area with resin epoxy - the replicated item should be completely submerged, the resin should make a layer a little more above item. Let it harden again. Now you could easily remove the new form from boxed area and divide it into two pieces, halves. Remove the item. Now you can fill the form with silicone to make infinity number of copies. Through one of the two canals created by wooden supports of item you can press more silicone, the air bubbles will leave same way during hardening. With wax or similar materials this works well too.

@MilanWolfl I'm trying to make fake silicone body parts using my friends. So this won't work unfortunately 😕 I'm looking for a way to make the end product silicone like a life cast of the persons hand or foot or arm so it looks and feels somewhat real when it comes out the mold. I need the end result to be silicone. I live in an apartment so I was hoping I could do it safely and without spending a lot maybe using home found products that aren't too pricy. Needs to be skin safe and not put off any bad smells.

@jazzyj2182 what makes you think my intentions are sexual? Think before you post please.

She said no in the video 😊

Someone else def recommended wearing a good mask.

Silicone is hazard to health!!!! IDIOT

Vaseline or petroleum jelly. Just my guess... I have no idea and didn't even watch the video. Hope I helped! 🤞

@@misteryudonnome Thank you 🫶

Is it streachy?

If it's not 100% silicone, it will never "harden" Putting it in the water causes it to release the acetic acid and start the "hardening" process.

I have used this method with plastic model parts with no problems.

@@yrunaked4 ok thank you very much. I do really appreciate your response!😊

@jazzyj2182 you know preaching to people who dont ask, really turns people off from what youre spouting. How well do you know the rwligion that you are spouting? For instance- how many of each animal did Noah take on the ark?

SURE

yes

You need to spray first, something that is oily

Besides it getting stuck on your hand it could take 24hrs to dry up...care to put your hand through that statue phase

@@myjourneytotruth I want make mold from my foot, it's easy or not brother??

@@dr.dahshan you cant do this on real body parts. however, you can cast a body part in Alginate first, get a plaster positive, then do the silicone over that plaster cast.

⁠​⁠​⁠​⁠@jazzyj2182so a custom hand mold is “sexual immortality”? 😅

I recommend just watching a few different videos, practice makes perfect

Not really 😂

Problem is Type 2 has additives like latex to keep flexible and resin will react badly if doing resin casting.

Thanks for that tip because I was going to use resin. Your method is so simple and easy and I was trying to make a box to put the mold into with hot glue and it just didn't work too good for a two-part mold you have to use clay on one side but this is the best tutorial I've seen yet thank you save me a lot of money and time and headaches

Did you use type 1 or type 2?

:) I did make another video showing the use of the mold for a beeswax casting (I was making a candle). It would work the same with resin. I dont use resin much, sorry. but I can say that resin leaks out of silicone molds very easily. My recommendation for that is: follow my other demo for casting into silicone mold, but after you wrap the string around it, then you can dip the seam of the mold into molten wax. the string helps hold it there. the wax makes a cool seal that helps prevent leakage.

@@hopibreton2124 pro tip right here

They're not cheap those kits.... This is actually a money-saving hack and works great with the right technique

​@@quazimodo1973I'm new i wanna learn how to make it 😢can you teach me