Part 1  

#conversionkit #gasgenerator #generator #lpggenerator #installpgkit #lpgcarburator
This is quick video which shows how to install the triple fuel carburator conversation kit. This conversation kit can run your generator in LPG mode, CNG mode and lastly gasoline (petrol).
To run it with LPG (cooking gas), securely connect the kit to the gas cylinder using the standard pressure hose. Ensure that the end clips are well fastened so as to avoid leakages.
check the LPG mark on the kit and turn the control nub to align, thereafter you can turn on the regulator and then start the Gen after pushing the purge or pressure release valve to prime the carburator.
Same process applies for CNG except that the CNG cylinder operates at a much more higher cylinder pressure. NB, the regulator and hose for CNG must be as prescribed in the safety standard. Do not assume that LPG cylinder, regulator and hose can be used for CNG. Please go for the standard CNG kits.
To run your generator using the gasoline (petrol) option, simply just plug in the petrol hose from the gen tank, secure it with the spring clip and then start the generator. Kindly note that the LPG/ CNG regulator must be shut off (closed) before running on petrol.