Part 2: Install Alpine W940 navigation into 2000 maxima, with TR7 bypass? 

Thanks brother, I apreciate it

You dont, if i remember correctly there are two output wires and you only need one, one is for alpine units and one is for pioneer i think. One output is latched and the other is pulsed so just make sure you use the correct wire. Alpine needs to see pulses in a specific sequence.

Jill Morrison if i wanna have dvd.back camera and bluetooth and steering controls what do i need for parts it does't have blue tooth or onstar right now

Jill Morrison How can I help

did you ever get your stereo figured out?

Gamil Sayed are you trying to plug an apple or android device into it?

It sounds like the tr7 isn't working properly...can you watch a DVD? If not your deck may not think it's in park, that will limit your settings and not allow some functions of the Alpine head unit

@@SouthdownGarage no image on dvd just audio, i tried to program the tr7 in case it wasnt done properly but cant get the ledlight to turn on when pulsing the brown wire into ground

@@mrhoya14 have you tried these steps? 1. Connect the black wire to chassis ground and connect the red wire to 12v accessory. 2. Slide the TR-7 switch to the ON position and turn the ignition on. 3. ‘Pulse’ the brown wire 2 times and wait 3 seconds. The LED will flash 2 times for confirmation. The LED will rapidly flash for 3 seconds. 4. Slide the switch to the OFF position. 5. Connect the green wire to the Alpine’s blue/wht wire, the blue wire to the Alpine’s footbrake input and the white wire to the Alpine’s handbrake input. 6. The TR-7 will automatically bypass the video safety when the radio is turned on.

@@mrhoya14 try this pdf...its what I used to set it up originally. www.google.com/url?sa=t&source=web&rct=j&url=www.carid.com/images/pac/items/pdf/tr7-installation-instructions.pdf&ved=2ahUKEwjznP-L2IPiAhXF31QKHQhnCnoQFjAAegQIAhAB&usg=AOvVaw07OuQMnWzV6yRQCkkMgu-D

the ground wire right? Couldnt get the light to turn on when i did those steps