Hi mike Thanks to this video. I made a cloud ceiling with a 60 meter ws 2812b led using the sp511e and sp901e. İt worked smoothly at one time. Thank you so much.🙏
Hi - the 901 will only reproduce what you input, so if your controller is outputting 100 pixels the each output of the 901 will produce 100 pixels, so if you use all 4 outputs then you will get 4 x 100 pixels, or 400 LED's but they will only show the sames 100 thats inputted
Congratulations for your videos, they are really interesting. However, I wanted to know if it is possible, with a single wifi controller, to manage two outputs of the sp901e independently, for example, one output turns on a red strip and the other a green strip, or on one output fixed light and on the other some games light, etc... Is it possible?
If your using the 4 wire LED lights, where all the light change at the same time then this will not work as each colour is controlled by each wire (with a common ground) this splitter works with the single signal wire LED's
Hi there Mike! Thanks for share your knowledge. Roght now I am doing my own DMX web but I don´t know how to connect the SP901E Splitter / Amplifier to my PC. Can you give me a hand please?
Yes it can - but the longer you have the signal cable the more data loss you might have, also if your getting flicker check your grounds, or add a couple more
Hi I have an urgent question. In the meantime, thanks for the great video! Connected everything as explained and it works. I use LED Music Controller SP107E and in the application you can't set more than 150 pixels (I have the 300 strip) so it works halfway. how do we proceed?
the SP107E can control up to 960 LED's, you can set the number in the app you can download here is the manual www.ledbe.com/image/catalog/Sperll/sp107e-manual.pdf