Part 4 / 8th scale 3d printed supra with 2 cylinder engine project / Scale Addiction 

i hope u make it a Paul walker car👍👍💀💀

Thanks, I'm so excited for this one

Thanks for watching and supporting

Thanks

Hope you enjoy it!

Hope you enjoy it!

Yes it's wider really, that's how I like it too

Thanks

Thanks for the visit bro/, appreciate that

Appreciate it

Thanks 👍

Yes, I will change the engine cover when I'm done with the body, to make it look more like 2jz

Thanks, after finishing this one, I will make an electric version too, sure I will keep that in mind

Thanks

Thank you very much!, I can post the files, but still not fully finished

@@scaleaddiction There is still a lot of work to do? Also, could you please tell me if the full chassis is printable on a Ender 3?

it's not it is bearly printable on my Ender 3 max@@sebastiancojuharii5958

Yeah, I know. This should be present in the description before buying it, or at least scaled to fit.@@ajahniepemberton1860

he said it in his video and it was also said that he will also publish files printable for smaller printers @@sebastiancojuharii5958

jjst use epa adjust on the radio

@ThePerle1997 you don't get it do you? The calibrations are at the remote. It's susceptible to noise , since he's already running an engine inside it which will definitely cause signal noise on the receiver side of things 🙄 which is on the car. Unless you could set up epa on the receiver itself, it doesn't matter. I'm telling from experience since I also have a similar setup running on a bagged rc truck with a custom chassis. The remote and receiver are stuff I made and programmed on my own so the pwm calibrations are at the receiver themselves embedded into the code

@@orange_tweleve i ran so much shit Till today, and if you got an actually high quality Remote and a shielded Receiver with a shielded coax cable, it wont be affected by the ignition voltage. I can Tell you from my boats as well. My GPS loses Signal because of Electric Noise from my ESC (No Wonder with 760 Amps going through them) but my Receiver doesnt have any issues at all. And its Not Even properly shielded. Just use Quality Equipment and Place the Receiver on a good distance and you will be totally Fine. If Not, use some Aluminium Foil or other conducting material to prevent the Noise. (That works, Trust me- my boats Are from CFK, No Signals or Electric Noise going in or out, you Need to pull the Antenna wire outside of it.)

@ThePerle1997 will It's a realistic looking supra he's going for. He's not going to stick a big ass antenna in there I suppose. About the GPS losing signal , it's most likely your motors pulling a lot of power if everything is under the same battery , electricity always passes to thing that draws in more current, most gps modules pull less than 100ma, And lol do you really think your esc handles 760 amps !?? Jeez sorry but you lost any credibility about electronics with what you said. There's simply no way the copper terminals in a tiny pcb can handle 760 amps without burning out , that's provided your batteries can pushout 760 amps at once , you must be having a power station in there to push that much power. Just because the fancy rc company you buy from slaps big numbers doesn't mean electrically its correct. All these rc crap gives out fake current draws, buy a multimeter and measure the current draw , there's no way on earth an esc handles 760 amps at 7.4 lipo nominal voltage , thats around 6000 watts! LOL . And yeah about the shielding , I agree , aluminium foil should be grounded to your battery negative for it to be actually " grounded. " and I was wrong about the engine noise , he's using a 2 stroke rc engine, those don't have spark plugs so there's no electrical noise. But it's always safe to have some form of a controller inbettwen receiver and servos to stop them going to either 0 or 180 when you lose signal , whatever calibrations you set in the transmitter doesn't matter because the receiver don't know it once you lose signals , that's why every rc you buy allows the servos to actually move the entire 0 to 180 range without hitting on anything because it can always happen , either by mistake or just unlucky signal loss.

@@orange_tweleve i can provide Logs about what im saying. And its Not One but 2 esc. And 2 Motors. Each pulling around 380 Amps. And i have Data Logs to Prove. We actually pulled 650 amps from 1 Esc in a 2 motor car. And I can prove that with logs too. These are special Esc for high power application. Castle creation. And they can handle that. It’s not the RC car company telling me those numbers- it’s my own experience. Don’t talk shit about me if u don’t know me or what I’m doing. I’m building High Speed cars and boats. Actually the manufacturer of my motors tells less amps and power than it actually made. And my GPS has its own power source.

The shocks sprint at lowest point, I can adjust it when the car gets heavy or I can change the springs, but we will see

@@scaleaddiction You're right, this could be enough of a change. Great, keep on going!

Thanks

🙏🙏

I'm using pla now, after all testing completed, I will resin print it or abs print it

hello, sure you will be able to download the files as im adding or chaining for free once you purchase the file

This is not the complete file, i have to add other as im test fitting and showing on my videos Yes the links in the file description, only the ones was fit correctly, others I will add with the files soon STL File: cults3d.com/en/3d-model/game/8th-scale-supra-with-2-cylinder-engine-project

Thanks, I had to tighten on bering and take out a price of stuck filament between nozzle and tube, now it works better, This is not the complete file, i have to add other as im test fitting and showing on my videos STL File: cults3d.com/en/3d-model/game/8th-scale-supra-with-2-cylinder-engine-project

I ordered new set of wheels, I will design on that one

🙏🙏

I'm using creality cr10 max, but there are better now, bambu looks like the king for now

@@scaleaddiction Thank You.

I would need that acually, bc I have to reverse 2 servos too, bc I think with coding, you can solve that problem too right? Dm me on my Facebook page scale addiction

@scaleaddiction sadly I only use instagram , and I will need some values like your servo angle limits ( servos are meant to work 0 to 180 degrees of rotation , and within this I need to know what your servo angles limits are to write the code. ) the other issue is its a software endstop , servos with signal jams will most likely happen even with software end stops. I will have to look at the power draw / voltage for the servos too , to choose a transistor/ mosfet or a relay to cut off power incase the servo goes beyond the limit angles and hit the end stop. Inverting servo movement to two servos isn't an issue. Will you be using 4 individual rc channels to control the car height or just one single channel ? Regardless I assume , my arduino based servo controller with end stops will be a device that's in-between your servos and your rc receiver. I can write you a code and easy to follow circuit diagram so you can directly connect your servos to one end and plug in your rc signal ( 1 or 4 depending on whether you want individual servo control). For parts of the project you will need an arduino nano or pro mini, 8 end stop switches, 4 relay modules. Don't worry I will give you the exact names of the parts you will need. Hope you can solder your components according to my diagram.

Not really I have 4 rc cars and 3 are them are 3d printed averaging about 40mph and only broke one with repairable but I would consider it being totaled because it was the entire frame breaking into about five pieces but because it was 3-D printed I had the RC car back out on the road the next day the crash was it a ballpark of I would guess but because the GPS flew it said 70 into a parking block

sure im planning for that and cold air intake too

It should be part 4 😅

@@scaleaddiction 😁😉

I was thinking to make the r34 electronic 🤔

Yes, I will design them, but I was thinking to change the tires

I think that it is because of all the industry around the car industry, a lot of metal industry (material, not music) life because of automotive industry.

Because people don't want to buy plastic crap quality metal won't warp or lose strength if its outside due to weather the sun and so on

@@nlkmos7202 A lot our vehicles have a crap ton of plastic on the inside and outside that go through decades of abuse from the elements yet they seem to prevail. It would be cheaper and last longer because you won;t have acar that will rust to pieces right in front of you if u live in an area where it snows alot.

@@outlawflyer7868 you’re not wrong, but the plastic parts are to save on cost and they end up compromising on reliability, so like Teslas have plastic control arms and that is the main reason why Teslas end up in the shop to replace set control arms

Sure I will work on that soon too, but first is the steering and transmission thing to make it move first

That thing costs 3000 bruh you could buy a real car😂

It's one of my favourite, but I will do nissan gtr r34 after that

Why would u get sick of seeing supras. Don't sound like a bad thing

its my design cults3d.com/en/3d-model/game/8th-scale-supra-with-2-cylinder-engine-project

@@scaleaddiction That’s really dope!! $16 is worth it! Good shit!! Hey next one do an R34 GTR!!

@@DR.ELEKTRIK thats the plan, r34 is next