part 4 guide to tuning a nitro engine signs engine is to lean and to rich

Подписаться 6 тыс.

Просмотров 16 тыс.

50% 1

u can hear the low is way to lean when it cuts out this is what i wanted it to do so u new guys can see what happens when your to lean or to rich on the low #losi #driveTLR #proline #gojconcepts #infractionspeedrun #limitless #felony #alpha #novarossi #redsracing #traxxas #arrma #picco #fasteddy #protekrc #TNR�� #bonesbrew #maxycinco2.0 #adamdrake�� #8ightxelite #mugen #osspeed #ad2engine #futaba #nitroenginebreakin #senditrc #o.s.speed #tnrfuels #goarmy #veterans #soldiers #woundedwarriors #nitrofreak #rondadrake #arrmatyphon #fasteddy #proline #tekno #aka #alphadragon #ryanlutz #trinityrc #lunsford #spectrumrc

Опубликовано:

28 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 161

@GURU_RCs 3 года назад

Great tuning series 🔥🔥🔥 keep up the good work

@NitroFreak 3 года назад

tnx bro more awsome vids coming

@blameusa7082 10 месяцев назад

Your keeping Nitro alive! i just got one, and this has helped alot. spent 2 days spinning needles and not running... kinda got it just about right now, idels forever, bit smokey down low and bit screamy up top, but it runs. now i can rich high and lean low

@NitroFreak 10 месяцев назад

nice good to hesar u got it

@Pittbullmomma67 Год назад

Omg love the jumps... that's sweet.. nice video very good lesson 👍🏼

@NitroFreak Год назад

Glad you liked it!!

@VintageCR Год назад

Subbed cuz i love nitro, you take care of your RC(s) i can tell lol and you give proper tips and all together makes your content enjoyable. Keep up!

@NitroFreak Год назад

ty sir i try to host a fun channel and help new people in the hobby and yes always take good care of my stuff

@kevinnel9275 11 месяцев назад

Nitro freak,my Dude!!! This video, has me hooked, and listening to your advice, and knowledge, is getting me ready to rebuild my old Nanda Swift 1/8. 👊🏻🙏🏻 Hearing the rich/lean settings as you change them. This has to be the best tuning video for learning!

@NitroFreak 11 месяцев назад

its a good base line vid for beginners to learn no doubt

@coreytarducci36 Год назад

These tutorials are the best thanks

@NitroFreak Год назад

Tnx for watching

@DetoursRC 2 года назад

just built my first nitro buggy. kyosho mp10 tki2 with and os .21 xz-b v2. I have other nitros and im getting to where I can get a decent tune but always tryna learn. thanks 4 the tips.

@NitroFreak 2 года назад

ur welcome im live if u wanna pop in talk nitro your always welcome

@RCscottyZ Год назад

Amen on the over revving !!!!! Absolutely 2000% right brother !!!

@NitroFreak Год назад

tnx for watching ill be doing updated vids to this stuff very soon be sure to like and sub the channel for more great nitro content

@KevinMyers88 Год назад

Awesome video brother and stay blessed my friend 😊 🙏

@NitroFreak Год назад

Ty buddy

@AJYZF1R2010 5 месяцев назад

Nice

@NitroFreak 5 месяцев назад

@jasonedlund7282 3 года назад

Wow the abuse on this engine is outrageous! Very helpful to see it so outrageous helps us newbies like me from going to far! I felt I had decent understanding before but being able to see it so aggressively over lean helps me fine tuning my truggy! Very nice to see someone to abuse it for us!

@NitroFreak 3 года назад

id rather abuse my stuff the the new guys do it lol love it that i can help u

@RollinMyOwn 8 месяцев назад

1974? Only square backb window I can remember of that generation.... ty for the videos... I believe once I buy a new tank I'll be able to get mine to go...and I had no idea about warming the motor... that is one of the best things that I needed to know...

@NitroFreak 8 месяцев назад

my camaro is a 1970 split bumper 74 was similar but many different body lines and tail lights

@RollinMyOwn 8 месяцев назад

@NitroFreak yeah I was looking squarely at the back window and taillights... lol beautiful car in everyway.. I miss the ones that I had. 78, 79, and 82/89 (82 front to just behind the doors then 89 from there back) I worked in a body shop and we had the 2 cars so my boss and I put them together ... beautiful teal blue and teal green flaked with purple pearl over.. she was a beautiful! I still regret letting her go...1964 small journal 327 built and borg Warner t5 with all hardened gears... scarey fast... loved it... my dream is a 67 rs/ss...

@NitroFreak 8 месяцев назад

im live if u wanna pop in and talk@@RollinMyOwn

@ramos.nitrorc Год назад

love the sound note of this engine!!.... I am thinking of putting one in my serpent SRX8

@NitroFreak Год назад

Hell ya its a great engine

@ramos.nitrorc Год назад

@@NitroFreak have you any experience with the serpent .21? rtr buggy

@NitroFreak Год назад

@@ramos.nitrorc not personaly i know people that had them there a good nitro to have

@ChesterThegamer 7 месяцев назад

Good video

@NitroFreak 7 месяцев назад

@rcnitroguy9317 2 года назад

This here video git me bk into nitro after destroying my t max that I had when I was a kid n now I know how to tune

@NitroFreak 2 года назад

ty appreciate ya watching if u ever need any help feel free to reach out to me

@shermanrc4723 3 года назад

Great video brother love the content 🏎💨👈👍👍

@NitroFreak 3 года назад

tnx bro i been getting allot of new blood in the channel asking me to make vids like this so its been fun doijng it tnx for stopping by look forward to ur next vid bro happy new year hope u doing well

@shermanrc4723 3 года назад

@@NitroFreak Happy New Year to you brother 👍👍

@NitroFreak 3 года назад

@@shermanrc4723 tnx bro hope u enjoy yours

@adamrodgers2377 Год назад

Awesome tips and that is one badass Camaro. I am from Eastern North Carolina, have a great day. 🤙🏼

@NitroFreak Год назад

same here im in fort bragg fayetteville

@adamrodgers2377 Год назад

@@NitroFreak Been checking out your videos and I subscribed also, but World of RC is the Hobby Shop I go to all the time. Now I also only live about 15 minutes from there, not a hour and a half like you do. They are good people and have a very nice facility there. I'm into the Rock Crawling/Trail Trucks and flying RC Airplanes, they are now adding a wicked Rock Crawling Course for 1/10th Scale on the outside and they are planning on building a 1/18th Scale Indoor Crawling Course. I'm stoked to have found your Channel, have a great day 🤙🏼

@NitroFreak Год назад

@@adamrodgers2377 awsome i go to world of rc in wilson mayb one day we meet up im live on my channel right now

@adamrodgers2377 Год назад

@@NitroFreak That would be awesome! Be on in 2 minutes and check it out. Thanks!

@mrpickles5942 Год назад

Wow unbelieveable

@NitroFreak Год назад

tnx

@pain_inthe_bass 2 года назад

That thing is tuff

@NitroFreak 2 года назад

yes it is i love it

@jesselott8881 Год назад

Just picked up a truggy, engine runs exactly like your example of too lean on the low speed side. Kind of "stutters" on take off and rpms are high at idle after i run it for a bit. Cannot wait to try and tune it tomorrow! thank you

@NitroFreak Год назад

hit me up if u need any help id be happy to help ya get it dialed in

@jesselott8881 Год назад

@@NitroFreak just tuned it up, finally got rid of the high idle. She’s running like a champ. Whoever I got it from had it running rich as could be on the high and low speed needle. We’re good thanks for the video!

@NitroFreak Год назад

@@jesselott8881 glad ya got it nice job

@joshchatwin8179 3 года назад

How meny cars and pick ups dose a man need great video bro keep it up Iv been looking for a video on this engine think of buying one

@NitroFreak 3 года назад

the trucks n car is mine suv is the wifes can never have enough transportation lol

@scaccobol 2 года назад

wow👍👍great video friend👍👍

@NitroFreak 2 года назад

tnx bro i got allot fo running vid be sure to hit the thumbs up on them tnx

@scaccobol 2 года назад

@@NitroFreak 👍sure friend!!👍

@NitroFreak 2 года назад

Tnx bro

@speedgears1236 Год назад

Hello Watched the first three tuning video's. Great advice. 👍 I liked how you mentioned low speed adjustments effect the idle. I wasn't told that back when I started out. And was like what F@*$. I really like how through you were. Many people try to cram everything at once. Looking forward to more of your videos. You know you need to sell your 70 Camero. And get a 70 Cuda right? Just kidding I'm a Mopar nut.

@NitroFreak Год назад

Tnx for watching

@MySonsRanimals Год назад

Question...having an issue after break-in. The engine stalls after warmed up when letting off quickly from full throttle. If I ease off the throttle, it stays running. It doesn't do it if the engine is cold. And it idles fine. It's a RTR Kyosho mp9 tki4 v2 with a ke2sp engine. I'm using 20% Sidewinder Race Blend Fuel. I tried adjusting the LSN…leaned to the point the idle was unsteady and richened to the point where the idle bogs and slowly dies. I also tried several points in between, but it still cuts out if I let off wide open throttle abruptly. I also tried adjusting the HSN…richening or leaning didn’t seem to make a difference. Other than this issue, the vehicle runs great through the RPM range…quick acceleration and no bogging or hesitation. I probably ran about 15-20 tanks through it so far counting the break-in. Thanks for any suggestions.

@NitroFreak Год назад

i would try a new glow plug usualy when an engine cuts off after warming up means the pinch is week time for a rebuild if its a newer engine i wouldnt think thats ur problem id set the carb back to factory settings and re tune from there there are a few things that could cause this reset carb try and retune and get back to me on the results and we can go from there i doent wanna have to write a book to explain lets try the simple stuff first and eliminate any easy issues sounds like tune possibly is way off if u say runs good in the rpm range tells me maybe to lean on the low needle possibly

@MySonsRanimals Год назад

@@NitroFreak I replaced the stock glow plug with a DYNP5604 Dynamite R4 medium. I'm guessing the stock plug is a 'hot' plug. It ran through almost an entire tank of gas before shutting off when transitioning from full throttle to no throttle quickly which seems like a slight improvement. This was with the leaner 'tuned' carb settings. I let it cool down and reset the carb to factory settings and it did the same. Are you supposed to let nitro engines cool down between tank refills? This is just used for bashing in the woods and parking lots. I was thinking of trying an OS #8 OSMG2691 plug or maybe a 'cold' plug next. I'm in PA, and it's 70 degrees today. I pinched the fuel line, and it took ~5-6 seconds for the engine to die...so I don't think it's running too lean with the factory carb settings.

@NitroFreak Год назад

@@MySonsRanimals sounds way to rich if ur doing pinch tests and takes that long to shut off sounds like a tuning issues and check the idle gap needs to be in the area of 0.05 on the carb slide

@thex_tazfast_x9842 3 года назад

NF brother. Quick question. When you rebuilt your diffs in your video did you reuse or replace the gasket in thier. Doing mine now. Ty for your time

@NitroFreak 3 года назад

no i re use them if there not torn just make sure put a light film of grease on them to help them not leak

@thex_tazfast_x9842 3 года назад

@@NitroFreak Thanks man. You bring new meaning to NFG. Nitro Freak Good😂😃😂

@NitroFreak 3 года назад

@@thex_tazfast_x9842 i try to do what i can for you all tnx for always viewing and promoting the channel many great things coming soon stay tuned

@nomi86cool Год назад

Sometimes your clutch is bad and you almost can’t judge it when tuning it makes similar sound

@NitroFreak Год назад

very true ive metioned that in other vids as well

@GrAYvTrAnE 2 года назад

this weekend i might finally dial down my nitro slash. I got it running "well enough" but it is probably a bit too rich to be honest. If leaning out the HSN and the HSN meters the fuel entering the carb would it be safe to say with a leaner meter on the carb the LSN might need to be richened?

@NitroFreak 2 года назад

U have to dial both needles equal them out u doent want one richer or leaner then the other

@tuberlive16k 3 года назад

WoW is exiting XD

@NitroFreak 3 года назад

tnx

@jimmygonzales5756 Год назад

I got all the tuning down however I can’t get that single stage after a pull and don’t hit the breaks

@NitroFreak Год назад

Low end stll to rich

@rcpd3157 3 года назад

You pretty good on that ramp.

@NitroFreak 3 года назад

Lol tnx you should see me on a race track or a even bigger ramp lol

@rcpd3157 3 года назад

@@NitroFreak you still racing after new years?

@NitroFreak 3 года назад

@@rcpd3157 yes ill be racing end of january is next race for me

@jimmygonzales5756 Год назад

Where is part 5 to single stage idle???? I need this good videos brother

@NitroFreak Год назад

Part 5 coming soon ill be doing allota nitro vids soon everyone been asking me to so stay tuned more vids coming after i finish this 5th scale buggy build

@TILEROB 2 года назад

dam thats fast

@NitroFreak 2 года назад

Oh yes

@markgarcia8552 11 месяцев назад

Do you know the part number to the engine mounts that work on the losi 8 rtr to use a bump box.

@NitroFreak 11 месяцев назад

Yes give me some time ill get it 4 u im live streaming right now

@markgarcia8552 11 месяцев назад

@@NitroFreak did you find it.

@NitroFreak 11 месяцев назад

not yet im looking just look for the team losi motor mounts for the truggy 4.0 on a main hobbys@@markgarcia8552

@ZingZingNZ Год назад

No one really says what is likely the issue when, it has power has a good idle. But. After WOT it returns to a crisp idle. Then a couple seconds later it creeps up idle

@NitroFreak Год назад

when idle creeps up after comin goff throttle is a rich condition whats happening is to much fuel in crank case that the engine is still burning off if that makes sence hope this helps

@ZingZingNZ Год назад

@@NitroFreak makes sense as its not even flush on the lsn it's slightly out.

@NitroFreak Год назад

@@ZingZingNZ ya u probly can lean it another tic mark maybe clear it up

@ZingZingNZ Год назад

@@NitroFreak check out my channel I managed to sort it. The prefoma maybe needs a slightly bigger idle gap? Latest video

@NitroFreak Год назад

@@ZingZingNZ some engines will need a little wider idle gap that is common

@TheDynaGuy 7 месяцев назад

I have a hpi trophy buggy 3.5 I got it out after a few years not running and I cannot for the life of me get this buggy to idle. I have the needles at the “factory setting” as described in the manual but it will only start if I put it under 1/4 throttle. Once it starts I can back off the throttle but at idle the tires are spinning real fast. I got new fuel, new glow plugs, fully charged igniters. I’m at a loss. I set the idle gap to 1 mm like it says in the manual but this thing will not idle right. It’s just cuts out once the rpm’s start going down. Please help

@NitroFreak 7 месяцев назад

couple things id look at first air leaks any were on the engine or the fuel tank 2 check clutch springs ive seen this issue before and a few different things contribute to it we would have to knock things off the list to see were to start i do live streams in the evenings if u wanna stop in and we can talk and try and help ya out

@TheDynaGuy 7 месяцев назад

@@NitroFreak I appreciate the response. About a half a quart and a few blisters on my fingers later the buggy is drivable. I had it running for at least 30 min straight earlier today. I was ripping it then just filling up the tank with it running. It was about 50 degrees today but I think I got it fairly dialed in. The “factory setting” for the idle screw listed in the manual essentially has the idle gap nonexistent. They say screw flush with housing but also should be about 1mm. It’s closed when flush. Then the “factory settings” for the HSN and LSN had the buggy so unbelievably rich it makes sense now why it was hard to start or only started when holding half to full throttle. Watching your vids definitely helped. Seeing you intentionally running the mixture lean and rich made all of the difference. I do have a question though. When the buggy is idling it sits still but when I lift it up on a box the tires start creeping forward slowly and eventually will speed up. I messed with the idle and LSN up on the box but couldn’t get it to a point where the tires didn’t move with the car in the air. Is this normal? I appreciate the vids and the response. Have a good holiday

@NitroFreak 7 месяцев назад

glad u got it going if u ever need help just ask and to ur question of the wheels moving on box maybe back down idle screw just a tad or check the clutch springs make sure u doent have pre engaging clutch shoes do to week springs@@TheDynaGuy

@favulus1 11 месяцев назад

thank you thank you thank you! i'm just a basher but you taught me a lot. are you still in the nitro game

@NitroFreak 11 месяцев назад

Yes i am

@pain_inthe_bass 2 года назад

My savage would have already broke something lmfao

@NitroFreak 2 года назад

Lol send it

@pain_inthe_bass 2 года назад

Hell yeah brother... it ant no fun unless the savage gets some.

@zackjay71 9 месяцев назад

Seemed lean on the low.

@NitroFreak 9 месяцев назад

sounded that way but it was right on point riding the fine line of too lean i do that sometimes to get max power but for longevity ill ricjen it a tad for bashing

@davidsinclair8952 4 месяца назад

Ohh nooo

@NitroFreak 4 месяца назад

shes a runner

@bevinsracing 2 года назад

Hey freak how about one that will make it about three laps on the track decent idle good smoke trail doesn't run hot but some of b**** turns off after a couple laughs has good pinch new glow plug

@NitroFreak 2 года назад

that could be a few different issues causing that i probly be doing a vid on that soon

@bevinsracing 2 года назад

@@NitroFreak perfect thanks.

@NitroFreak 2 года назад

@@bevinsracing no problem

@adrianquinn6340 2 месяца назад

Do you have a number? Have a question about tuning on my jato 3.3

@NitroFreak 2 месяца назад

whats ur question what can i help you with ?????????

@adrianquinn6340 2 месяца назад

@@NitroFreak the car bogs out from a stop when I try to “gun” the throttle

@NitroFreak 2 месяца назад

@@adrianquinn6340 if it bogs from a dead stop to half or full throttle usualy means ur way to rich on the low speed needle

@mnsportsguy1978 2 года назад

did you build that ramp? if so what are the dimensions?

@NitroFreak 2 года назад

Ill get dimensions later today for ya

@mnsportsguy1978 2 года назад

@@NitroFreak cool thanks man!

@NitroFreak 2 года назад

No prob man

@mnsportsguy1978 2 года назад

We're you able to get those measurements? Also, did you build it yourself?

@NitroFreak 2 года назад

@@mnsportsguy1978 i didnt build it it was givin to me havent measured it yet i gotta dig it out the garage ill try do that today for ya soory for the delay been busy

@rcx8971 3 года назад

I seen woogie put out a tuning video yesterday looks like he's trying to follow the leader.. and ur the leader

@NitroFreak 3 года назад

ya did ya notice that i think he seen i passed him in subs he is a nobody but ya just copys me i said it in the live feed last night few guys called it lmao

@mrpickles5942 Год назад

Watch out for cars driving distracted 😳

@NitroFreak Год назад

u know it

@rcpd3157 3 года назад

And please tell your wife Thank you for me. I appreciate her checking my channel out as well. I meant to the other day and something happened got me distracted. It doesn't take much to get me distracted 😉.

@NitroFreak 3 года назад

N O prob will do