Part One - Get to Know your HikMicro Alpex 4K LRF - In-depth Set Up Guide 

brilliant timing just ordered one and it should be in the store wednesday 19th June 2024.

Top job ! Hopefully this will stop all the questions we see on the forums & FB. Most of the questions are because folks are not bothered to read the manual.

Thanks set it up with little or no problems and I even read the Manual!👏👌Even Ballistic data!

Great video thanks for taking the time taken so much of the hassle out of set up

Nice one mate, iv just got back from zeroing mine, I'm going to set the rest up now I know how 👍 Thanks Paul

Brilliant job thanks for this top video

Good stuff thanks 👍👍

Thank you for excellent review. Hopefully you will add some tricks, what to do, when ballistic calculation is not spot on, despite all inputs are according to manufacturer data. Which values should I play with, to bring calculations to work properly. Thanks again, from not so normal person, who understands and prefer metric system to imperial one. 😊

Hi Team, Is there a reason the reticle is high & right off centre when on 3.5 base magnification? I’ve adjusted to center

Awesome video mate. What lever are you running on the focus ring?

Love the text. Is it Cockney Geezer?😂 Seriously though, great and informative video.👍

Thanks for the informative video, during the shot playback feature I don’t have any Audio/sound, is this normal or is there a problem with my scope?💥🤔

Gday mate. Do you know how to move the box that the laser pings in. Mine is in the upper right and a fair distance from the reticle on 3.5 magnification. I have seen other videos where it is lower left close to reticle centre. Can’t find anything in the manual about it. Also the second reticle you get when using the ballistic calculator won’t piss off after taking a shot. Any help would be greatly appreciated Thanks mate🇦🇺

Hello! Mine just arrive yesterday, and today was my 1st day shooting. Whatever i saw that mine doesn t show that degrees on bottom and the right anywhere. Do i need to activate it Somewhere? Thank you!

Sorry posted when I left unattended. Re-below question regarding moving reticle. On center reticle my Alpex 4K only moves back into middle of screen when zoomed into 7x mag plus? I have center reticle mode turned on.

I'm a bit confused about the zeroing profiles and using the ballistics function with them... From what you've said, you can choose A to E, and for each of these, assign a number 1 to 5 to each, so a total of 25 possible combinations, and each of these has a zero distance input. Fine so far. But say I want to set up my air rifle on profile E, and I use different pellets and or power settings. So I set up say E1 as 15gr low power, E2 as 15gr high power, E3 18 gr low power, E4 18gr high power and so on. If I then want to use the ballistic calculator, I'm limited to 5 total ballistic tables. Meaning that I can't really use the ballistics calculator with reticle profiles A to D (which would be different rifles) if I've used up the 5 tables with my air rifle ballistics on profile E? Is that correct?

Nice little walk through. I initially put my speed in as fps unconverted to m/s. 😂 big boo boo for an air rifle 😂

Can the lrf be adjusted? Mine hits below the box on the screen

I notice on this video that your firmware build is V5.5.81_240229! On mine it is V5.5.81_240202 but on the sight app it’s saying no updates? So is mine or others an older build? Or are we waiting for your build to be cleared for public use? Thanks 🤩

divide your feet per second value by 3.281 to give metres per second

Is it possible to adjust the brightness of the reticle please.

Hi I tried to zero last night and run out of y going down I have medium sports match rings on when I thought about it had the ballistic calculator turned on would that impact me trying to zero Thanks

Hello just got the hik alpex 4k lrf and I did the firmware updates straight away through the app next to my scope, when I go on app all says up to date, you mention about clicking restore to save the firmware update ? Does restore not restore it back to the factory settings for if you was going to I.e sell it ? Any help much appreciated Thank you in advance Mitch

so what mounts do i need so i can swap it from rifle to rifle

Can you move the lazer square ?

Hi your profile for setting up different rifles do have say A1 B1 C1 D1 E1 then your BC A1-1 B1-2 C1-3 D1-4 E1-5

Hello dose’s this optic can handle shock from cal. 3006 .?

i thought it was you (dunno for sure )who did the sytong ht 60 review..i bought 1 because of your indept ,how to set it up etc ..and it is stil going strong..if it was not you sorry about that ..😀 p.s is this better ore the same as the pard ds 35 i thought?Both are way to complicated for me ..i stick to the sytong ht 60 ☺

It would be nice to be able to give the profiles names.

Doing a restore put the scope back to factory settings

Why is it the lrf box is in a different place on every one i see, mine is right at the top of the reticle and leaves the screen with 7x mag, i could see nothing about moving where the lrf box sits

Whats price

Dont you have to the bullet weight in

cant hear it, volume is extremely low