Part2 Samsung clx-4195 c1860fw clp415 paper jam fix (1)

Подписаться 5 тыс.

Просмотров 23 тыс.

50% 1

Part 2 Samsung paper jam repair for clp-415 clx-4195 c1860fw with a Quick shortcut. You need to fix all the solenoids at once otherwise the printer will continue to be unreliable.
Tips/Gratitude (Copy & Paste to Address Bar www.paypal.me/fixitfast )

Хобби

Опубликовано:

2 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@TerryJonesPrinterRepairs 2 года назад

Tips/Gratitude (Copy & Paste)paypal.me/fixitfast

@ureylau 2 года назад

I followed the instruction to replace the foam from the solenoid and the plate and with the same "paper jam in tray 1" error. Then I put double layers to make it thicker but still fail. Any further suggestion mate? Thanks Urey

@TerryJonesPrinterRepairs 2 года назад

@@ureylau Was there any instruction in the video about replacing the foam?

@ureylau 2 года назад

@@TerryJonesPrinterRepairs Because the foams was worn out and in bad shape so I removed the old foams cleaned up and replaced by a piece with double side adhere tape (with thin layer of foam) then cover small piece of paper on top of the tape. Probably a year ago I fixed another problem (cannot remember the error code) created by the left hand side solenoid by using the same procedure and it worked perferct till now. But this time it did not work on this right hand side solenoid.

@ureylau 2 года назад

Almost 1am in Sydney here so probably will check out any suggestion some time tomorrow. Good night and thx again.

@mambaoyt 3 месяца назад

Worked like a charm! Thanks for sharing your knowledge

@pfefferle74 7 месяцев назад

Thank you so much, you rescued my printer - a C1810W - from the scrapyard too. I already had to replace the clock battery and fix the first solenoid this year. Planned obsolescence if I ever saw one - thinly disguised as a measure to reduce clacking noise, I suppose.

@TerryJonesPrinterRepairs 7 месяцев назад

Exactly

@michaelobrien4943 10 месяцев назад

Thank you for this video! I had all but given up and was about to enlist the help of a repair person and probably would have spent on repairs as much as I did when I bought this Express C1860FW almost 9 years ago. This absolutely worked and hopefully I can get at least a few more years out of this printer>

@derjansan9564 10 месяцев назад

Nice to hear that people are expanding the lifetime of their printers. Mine broke two days ago and I am planning to repair it today. I just do not want to send it to the landfill, especially since it did a great job until it broke down.

@rene1274 6 месяцев назад

thank you so much for sharing !! thanks to you i fixed my printer :)

@andrewtagg3690 Год назад

The gift that keeps on giving. Thank you so much, you have saved yet another printer from the landfill. I also used a small piece of 3m foam tape, worked like a dream.❤

@trevorag 3 года назад

I want to thank you so much for this. I didn't want to throw the printer out, and this did the trick. I used my Dremel to cut the hole somewhat cleanly. Was about to get the solenoid out and replace the foam with double sided foam tape.

@HMeyer-de5hl 3 года назад

Thank you so much! Without your advice I would have bought a new printer. You saved my day with your awesome instruction!

@storm94k2 2 года назад

Coming back to thank you again as it started giving issues and i followed ut through and wola it is working again, thanks a ton.

@brettansley8600 3 года назад

Lifesaver! I have an appointment tomorrow and need to take a load of printed material. But my printer gave the dreaded paper jam error. I just followed your instructions and it worked perfectly. 15 minute job and I'm back in business - thanks a lot!

@omalbec 3 года назад

Another success story here. I had previously fixed the easy to reach solenoid by using a new piece of foam, but since I had to go in for the second one, I applied the super glue treatment to both of them. Easy. No more than an hour for the whole deal. I used a Dremmel tool to slice through the plastic nice and cleanly. It is unbelievable that a major manufacturer would let this crap continue for so long. And so many people will throw them away or spend big $$ to have them fixed. Thank you for posting this. I tried to send you a tip via Paypal, but the link was bad.....

@omalbec 3 года назад

Well it did work...for about 3 pages, then the same thing. The first 1" or so of the top of the printed page is getting accordioned and jamming. I eyeballed that the solenoid (both actually) are firing. I removed the foam and tried without; same. I added a nice new piece; same. I cleaned the roller mounted on the back door that presses against fuser; same. I emptied the spent toner bin; same. I'm out of patience. Between these issues, the high cost of toner and the miserable WIFI functionality of this printer, I'm about ready to toss it. Seriously considering a Canon ink jet with the mega tank. All I do is occasional printing in a home office. I understand why Samsung sold this business, but I have NO idea why HP bought it other than to prevent a new competitor. ANY suggestion welcome at this point.

@alejandrofelix9477 3 года назад

Thanks, it worked on my printer. I used a dremel instead of the scissors and just used a self adhesive foam pad. But it worked on the first try.

@acpredator 3 года назад

My printer CLX-4195FW is working now again!!! Thank you so much for the hack!!

@TerryJonesPrinterRepairs 3 года назад

Quality long lasting modifications / Repairs. Hack jobs can be found elsewhere on RU-vid

@markuswilliner2707 2 года назад

You, sir, are a freakin' genius. You helped me solve my problem in the most unexpected way and using the most unusual utensils. I have a clx-4195N and it worked like a charm.

@TerryJonesPrinterRepairs 2 года назад

Tips/Gratitude (Copy & Paste -Don't Click!) www.Paypal.me/fixitfast

@JoeSC100 Год назад

worked like a charm - thanks! Also, it's easier to cut the box out of the bottom with a box knife, cuts pretty easily.

@mark_j_g 3 года назад

Thanks for your video. I had to do the same repair to fix the Actuator Error A1-4112 one year previously (as you mentioned in passing in your first video). In both cases, I used a small piece of thin double-sided 3M tape to bulk out the pad. To gain access I heated up a stanley knife to melt an access port. A little fiddley but it worked. Thanks again.

@LupoWolfram 3 года назад

Thanks for the video man! I was on the verge of throwing my C1860FW out of the window!

@tho.b.1431 3 года назад

Really great tutorial, appreciated! Saved my printers life ... and relatively easy to do. I also use a Dremel-like tool for opening. Thx! My printer Samsung CLX4195-FW.

@rodicaciurdas1051 2 года назад

You are a genius! Thank you so much for the tutorial. It was a lot easier than I thought!

@olabatalden7617 2 года назад

Thanks a lot. I fixed my printer. Great video.

@pierolandi7815 3 года назад

Soooo good...!!! Very interesting and functional trick... you saved me, thank you!!

@simoneluise 7 месяцев назад

I letteraly love u ❤ 10yo printer fixed for other 10 Y of lovely work.

@TerryJonesPrinterRepairs 7 месяцев назад

Tips/Gratitude (Copy & Paste to Address Bar www.paypal.me/fixitfast )

@happyking97 Год назад

Genius fix, thank you very much!

@gkastes 3 года назад

Worked like a charm. Thanks so much.

@DarrenChallisKIS Месяц назад

Thank you so very much

@storm94k2 3 года назад

Thanks man this worked for me as soon as i opened the printer and was about to cut it ,it might have understood what i was going to do and it started working :) if it does that again i will rip it open, appreciate the help

@johanhedinger5501 Год назад

Thanks a mill, worked like a charm👍

@stevebradford6190 2 года назад

Thank you! this fixed the problem!

@matze0 2 года назад

Works for me, thanks!!! 1860FW

@ralfsch9924 2 года назад

Super > Thank you

@chrisbarraro2492 3 года назад

Terry - thank you very much for posting this! I already had to fix the solenoid for the other error code - I was excited to find your video about this fake paper jam - albeit you scared me chopping into the bottom with those snips - 😂😂😂- nonetheless, it worked. I will not share how many times I was screaming "F" words at Samsung - I may have printed 700 sheets total on my C1860FW and already put 400 bucks of toner in it for 2 errors crippling it - I appreciated your commentary about these wanker companies. Anyways, thanks again!

@mesac0ango 3 года назад

Hermano. Agradezco sinceramente que compartieras esa info. Con esta pandemia tuve que transformar mi casa en oficina y colegio.Un simple papel y mucho cuidado y todo esta bien. Gracias. Espero tengas un buen 2021 saludos desde Santiago de Chile