Maraming salamat sa effort mo na magcontent ng ganitong gawain lakay, karagdagang kaalaman nanaman ito, may tanong lang ako lakay, ano ang name ng mga clutch layer mula sa output shaft hngang bago mag oil pump?
Sir, ang galing mo. Napansin ko parang ang lahat ng thread ay pakaliwa, pakaliwa ang pahigpit ng tornilyo sir? Sa automatic transmission. Salamat sa vlog mo sir.
Thank for videos. Great work. Could you please activate the subtitles?..in spanish or english ass possible. About that A750F, what was the problem? Only vibration at 50 speed? Only cleaning and changed the orings?? What about the valve body?..SL1, SL2..etc are all correct? Thank you
@@ararlakayvlog2684 hi! The subtitles could be activated in your youtube channel using “youtube studio” in the pc. You have to do it video by video. Thank you again. Your work is very usefull!
I HAVE A PROBLEM WITH MY TERRANO IT'S AUTOMATIC TRANSMISSION IF I PUT ON D (DRIVE) THEN ACCELERATE IT'S VERY LATE FOR SHIFTING ESPECIALLY ON TRAFFIC IF YOU PUT ON P OR N THEN PUT BACK ON D THEN ACCELERATE IT FEELS THE DISC WAS SLIDE ITS HIGH ACCELARATION BUT MOVES SLOWLY.KINDLY HELP ME FOR THIS PROBLEM. THANKS
Lakay good morning tanong ko lang ayaw nang gumana Ang automatic transmission ng aking sasakyan Toyota Revo model 2000,ayaw na gumana sa reverse at sa drive,ipinarada ko lang sa garage tapos nagpalit ako ng gulong,at disc, brake,tapos pag start ko parang may nag grind di na sya mag reverse at drive.ano kaya dahilan bakit ayaw na gumana.
Hi friend, my A343F transmission is new before a full rebuild, but now it is overheating when upping hill for a long time in 3 or D. I have use ATF VI on it, do you have ideia what to check? Thanks
Peace be upon you. I am from Libya. I have a 2008 Tundra. I have a problem with the gearbox, p2714 and p0776. Knowing that, I want to fully serve the electrical part, solonide, and the paddy. I have a delay in the d and a bump at a speed of 30 to 40 miles with the fourth march. What is the problem and where are the faults? Is the clutch or the valve?
@@ararlakayvlog2684 The clutches when we opened the valve, they all seemed to move as if there were spaces between them, maybe burned, maybe not, because the oil was black and smelled not good.
@@ararlakayvlog2684 Greetings to you from Libya, and we invite you to visit us, and I am a fan of the work you help people with to fix Toyota Tundra breakdowns.
Hi, I’m rebuilding a A750F and stuck with a problem. Car gets over race on the 2nd and 5th gear. Exactly at 14:54 minutes in the video you’re putting 5 pressure plates and 4 clutch plates, tried doing it but then the upper piston doesn’t fits in its place.. If I put 3 clutch plates and 4 pressure plates, the upper piston fits at its place but there’s no place for the movement of the clutch plates. Less than 1/2 centimetres. Can you please help me out…😢
fantastic video sir, just a quick one please, must i always measure the thicknesses of the frictions and steels with a vernier caliper before putting them on the transmission. thanks
Idol itutuloy ko yung keento sa santa fe. Binaklas nila ulit at chi neck yung oil seal. Sabi ng mechanic ok naman daw oil seal tas nasemble ulit at pina start me tagas parin daw. Since bag oil seal at original di na pinalitan. San kaya nangagaling yun leak any idea sir ar ar?
Kung ok ang oil Seal .bka sira yung pinaka bushing sa OilPump or Bearing nya.malapit sa oilseal. pangalawa sa mismo torque converter yung welding nya minsan dyan ang leaking boss.
@@ararlakayvlog2684 idol kahapon bumili uli ako oil seal at ganoon parin me leak. Sabi ng chief mechanic me tama na daw yung oil pump.. ok naman daw torque inverter wala daw leak
Possible Boss.Yun din ang suspect ko kc pg maluwag n yung Bushing o Bearing Kahit mgpalit k ng oilseal tatagas pa rin.Hindi ko lamg alam kung buo papalitan kasama ang Bellhousing nya o hiwalay ang pump.Pag bushing type pwede i pa machine yan Boss.kunin lng yung Diameter ng converter.
Hi sir Ar ar ask ko Lang po possibile ba my sira sa valve body pag no error codes sa obd. Tpos no drive no reverse pag nag init na.new subscriber po. Thank you
Hello Boss.Pg malamig nkatakbo pero pg mainit na No R no D na.wala yan sa valve body.either sunog ang Forward clutch or Sira ang Torque Converter Boss.I check ang oil pg sunog overhaul n.Youre welcome.
Hello The patient is my gx460 A760F box. I changed the oil in the gearbox about 5000 km ago, everything was ok, trip to Italy. Suddenly, on a driveway (gearbox on D), up a hill of about 15 degrees, the car does not stop uphill but slides down, the ESP light comes on and the car brakes. When I turn on the reducer, the problem does not occur even at a much larger angle. Of course, original oil, oil condition checked. There are no errors on the computer. I checked the new filter was installed correctly. Does anyone have an idea? Yes, the gearbox works normally, changes gears, pulls perfectly normally, the car has power.
