PDI BIG BOSS Exhaust Manifold Cummins ISX15 Kenworth T-800 : Dump truck owner operator. 

Thanks for the video, made me realize I need to schedule more time to swap my gaskets than I thought!

OK! *WHO CAN GUESS* ? What's SO good about this & (all *DIRT BOSS* videos?) They are CANDID, they show what YOU might run into and best, *HOW TO WORK AROUND IT ALL* ! Being here from the start, I got to see ALL his back breaking ( *OH YES I WILL* ) videos and that's why we all LOVE the *BIG GUY* MIKE *DIRT BOSS* ! Thanks man!

DIRT BOSS, I was thinking if someone had written some curse words on paper, would you have signed it? "LOL" your tenacity is awesome, anyway was enjoyable, thanks for taking us along.

You should get a small shop built. It would make jobs like this one much more easy. Especially because you do all the maintnance and repairs👍💯👍

I was thinking exactly what you said. I need to send you a care package of extra parts that I have at the shop.

Great tipp on doing the cut studs.

Boss man… I only have one tip for ya… Dollar Tree sells those helium balloons… a couple of those tied to that turbo and you could have floated it into place! No need to pay for this advice. It is just one of the free services that I provide to my YT buddies! 👍👍

Remember to unplug batteries and ECM

You know if you spray penetrating oil on it right after you get done welding it, it'll exorb in the threads and loosen them up for you so you don't have to do it four or five times. Give it a try

Nice work. A pleasure watching. Thank you for sharing this with us.

Congrats. You saved a hell of a lot of labor on that one DB.

Hi, Your an unbelievable excavator and it's great to see how well you do mechanically fixing your equipment. Your a very talented individual and I love how you take a project like the Aldi job and you store everything in your head like a computer and you don't even have to look at the prints. I'm sure the GC of that job was impressed with your work and competency you brought to the table regarding any change orders that you might of had. Keep up the Great work Mike and I hope you have a prosperous 2023. You have an awesome channel and so much variety of videos you produce. Keep up the great work!!!

Always done my own maintenance Mike but made me the out in all weathers and after work with lights man but it was always done right ha ha and with seven trucks it was full on

Nice no leaks new part all shiny painted up ready for work. Nice job thanks for sharing

Love the maintenance vlogs!!! I've learnt so much by watching RU-vidrs think I've saved an absolute fortune these plant/HGV fitters way over charge, I like to do everything myself and the more I learn the more I save!!! Mind there is some honest fitters out there but some have your eyes out, I've enjoyed doing all.my own stuff and saved that much I've actually built my own workshop I'm addicted to it now, not as big as your place as I live in the UK but it's big enough to work on all my transits and machinery, mini diggers and dumpers ect I love it and never thought I'd be able to do machines as I'm just a builder but thanks to RU-vidrs like yourself I've learnt so much 👌🤟👍

Place to store stuff- i use card tables from church to put stuff on. I love Maxwell House. Anti seize - copper type. Kroil I love for breaking free bolts. Slip plate for a slippy coating, dry graphite lube. pallet forks ect. Thanks for posting DB.

That's a lot cleaner look, good work, little bit of paint an it looks brand newskie, thanks for sharing mike

Great job, Dirt Boss! You just saved yourself a bank load of money by being able to fix it yourself. Plus you know it was done right. Great video. Thanks for sharing.

WOW !! My first Dirt Boss video view, and I'm hitting the like button, subscribing, and making a comment. A one man show, outside, with just a couple hunnerdbucks in hand tools (and a welder) saves countless dollars. AND,....shares so many of those details that no one else will tell you about. Just WOW !! Thank you so very freek'n much for taking the time and all of the extra effort to record, edit, and then post to share this video. I have 2021 X15 efficiency?economy, and have been looking at the Big Boss manifolds. I've made up my mind that I am buying the tuner, but with you sharing this video, I may be closer to purchasing the manifolds as well. Just have to wait till warranty is off.

Great video and better to find the leak in the yard then running down the road, loaded. Keep up the great work and stay safe.

Got dang that bumper is shinny 😳👍

Struggle bus paid you a visit Mike 😬 You did get the manifold replaced, more on the job training for you, saved you some hard earned money too 👍💰😁 Bigger manifold, better gas flow, hopefully better exhaust brake efficiency 👍💪

DB needs a shop. A 28x40 to play in.. 14 ft door, Start a go fund me page.😂😂😂

Great job Mike. Glad you got her done. Thanks for sharing, have a great weekend and stay safe.

Great job Mike my arms are killing me from holding that turbo up 😂!!! Oh you were holding it but I felt your pain!!!! Looking amazing as usual!! See you in the next one!!!

Put a big boss PDI turbo on it that’s what I did on my truck. I did all PDI and deleted everything. I don’t know if y’all can delete up there in New York though. I just run gravel with mine. That’s a good looking truck brother I’m at Kenworth man myself.

Minimizer makes a tire tool organizer

Good thing the shade came over you😉 nice work Mike, sounds gooddddddddd!!!💪👍🇺🇸

YOOOO! You are a great mechanic, as well as a great dirt boss.

Nice job thank you for a Video 😎

Hey Mike, where's your wee helper Max? Hah, there has been many a time I wish a small pair of hands were nearby when wrestling something mechanical, - especially if those smaller hands had practical attributes like that young fellow of yours has got! PS. Thats a really nice clean and well looked after KW you have too.

Nice work, tip for ya instead of fighting that Nox sensor after the turbo just unplug and un-do the bolts holding the sensor plug, same with turbo speed sensor

Great job! Glad to see you back.

The Boss knows!

Run like a BOSS now Mike!👍💪

That truck is a beautiful beast and so enjoyable to watch you maintain it and care for it. Your attitude is inspiring and educational with out loud talking yourself through it and I love it all, sir.😇

Nice work!!

Great Video! Its great to see the project from start to finish with an @pdidiesel manifold!

Man that baby sounds heavy bud! Nice work nice camera angles too good work!

Good job DB , saved a bunch of money going it yourself 👌🤘🤘

Great job. Nice-a-nice.

😎😎um 🤔🤔 T6 exhaust manifold sir 😎😎

D-Boss! No fun!…nice job!

Hi brilliant vid well done very tricky stuff.👍👍👍😎😎😎

Good job brother!

Nice work Mike.....What would a feller pay to have a job like this done at the dealer??

Knock on wood 😂 I always knuckle tap my forehead 3 times 🤣

Hell of a Job Dirt Boss, was very informative and Great content!🍺🍺

Good job! You can fix anything 💪🏻🥰

You get it done with determination and excellence, nice job as always.

Great job. Is there anything you can't do?

Nice a Nice!

👌🤓

Funny my engine did broke exacly same bolt

There is some Kenworth mech somewhere yelling at the screen - HOLD YOUR MOUTH TO THE LEFT...... (or right????) Struggle!

1st 🤠👍

Best Trucks 👍

Lots of Dw40 😅😅😅

I have cummins isx 15. My whole exhaust manifold is leaking, both sides by the elbow and on #5 exhaust broken both bolts. I hear hissing when under full throtle and i can tell the truck doesn’t have full power. Could be this the issue ? and how long does it take ?

30:46 that sounded really gay