DISCLAIMER: Please be aware that the above video is from 2017 when I had some serious flaws in my technique that I have since corrected. For a much better example of proper pendulum casting, view these: High-swing Pendulum Cast - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xMPzUHkos3E.html Off-the-Ground Cast - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ei8x563pIfQ.html
Yeah that allows you to add an immense amount of force to the cast while still maintaining a smooth, clean cast. Twisting your core like that just adds a ton of velocity.
Yes this is great footage. It's difficult to understand how the pendulum cast works through video. I finally get it now after about 5 different video explanations.
good video ,plenty angles to check out,i use multi not fixed spool,but also use a longer drop ? tried shorter drop like yours and dont work well for me,each to thier own i think with casting.my weight sits level with reel at base of rod,(reel down butt)long n slow cast
@@mtuers What length is this rod? Just wondering. I am getting an Ugly Stik but I don't know if I should get a 10', 12' or 15' rod. Yours looks to be the perfect size.
Awesome video! Very informative! Can you tell us what length of the rod and size weight you're using in this video please. Just need for reference only. Thanks much!
Thank you. It was an 11' old fiberglass rod, throwing 3 or 4 oz. I'd actually refer you to my videos from the past year or two for much better examples and much better equipment, too.
I'm jus curious. But with this cast. Are you manly throwing plugs and lures or are you using cut bait? I have attempted to use this cas with shrimp. And it just comes right off. I always able to use cut bait "fish". Though. Thanks
That's one floppy rod, the whole top half of it overshoots a lot doesnt it, and then wobbles back and forth a bit at the end of the cast. If you was using a multiplier i reckon that would cause you a lot of over-runs. If that was a rod with a crisper action, id say thats a cast that would get you some seriously good distances
Indeed. I’ve since invested in a proper zoned action carbon fiber rod and cast 206 yards with it in a recent tournament. Back in 2017 I had no clue and was using this thrift store tackle you see in this video.
Never do this cast on a crowded beach ...lines do break and accidents happen ...all you need to do is get the pendulum straight out behind and power through
You must have finger calluses of steel trying that cast method without a casting trigger on a spinning rod. After numerous finger cuts I found out you can get something called a "casting trigger" on ebay for around $11 which holds the line tight for you during casting. They helped tremendously to ensure I get 100% of my casting power without losing a finger!
This video wasn't about distances - more of the form - so keep in mind this set-up is by no means ideal for pendulum casting. -11' custom surf rod, moderate action, 2-4oz. lure weight, New Concept Guide layout -Tsunami BFR-12000 spinning reel -20lb. test main line, 40lb. test shock leader (both mono) -I only used a 2oz. lead in this video so I could maintain the ideal form more easily. Usually I use a 3 or 4oz. weight + bait with this rod.
Matt Tuers Thanks. I was curious about rod length more than anything. I am honing my ground cast form for now. But am I interested to pendulum cast some day. Thanks again.
My 150 yard casts hit the ground after a 5 second flight. So that's 60 mph on average over the ground... except that the lead travels in a big arc, and the speed decreases over time. You do the math. 200 kph upon release sounds about right. Music is "Lis" by a German ensemble called Wermut.
The rod in this video is an old fiberglass rod for the U.S. market, pretty generic, medium action. It worked just fine while I was learning and I can cast it about 120 yards. Once a caster advances and becomes more serious about it, they might look for a rod with a fast action: almost rigid butt section, a stiff and powerful mid-section, and a soft tip. Note: with a medium-action rod, your cast should be pretty fast throughout. When casting a fast-action rod, slow way down until you hit the punch-pull point and speed it up.
You're right... at this stage in my learning I was chasing the backswing too much with my arms. Not sure about losing rod arc, but it definitely caused control problems. I've heard two trains of thought on arm position during casting: one stating the arms should be kept straight; the second that the right arm should be bent as if preparing to throw a javelin (what I was going for in this video, but overdid it). It seems to me that keeping one's right arm straight prevents any real "punch" action during the power stroke.
fantastic video. The angle of attack is not what people might think. Not seen it done with fixed spool reel like that. Amazing video. Cheers Liverpool UK
Not sure what "angle of attack" means, but aren't fixed spools getting popular for beach fishing over there in the U.K.? I recently switched to a multiplier, but don't see much of that any more in the British surf fishing videos on RU-vid.
@@mtuers The trend has moved towards fixed spool reels with massive rods but they dont pendulum cast they just use a 15 foot rod and shock leader. maybe 'swing path' is a better way of saying it rather than 'angle of attack'. Fantastic video anyways. So clear in HD. Good job
I think once you get a nice smooth style, finger protection becomes less necessary... although I'd still use it if I were casting heavier weights than the 4 oz. you see here.
I have been trying to get this down for days. This video is exactly what I needed to see how I’m doing it all wrong. This video is a diamond in the rough for pendulum instruction.
Yes, and I bought a more modern carbon fiber multi-taper zoned-action casting rod recently... 12'8", rated for 4-8oz. Oddly, the gains in distance between that high-end rod and the cheap, old fiberglass one in this video have not been huge. Maybe 5 to 10 extra yards.
I have been watching videos and good pendulum casters for years but this is by far the best I have seen if I could cast like that lol . I barely do a ground cast and a short Hatteras cast sometimes , understand I fish in Florida and is rare not to have people walking around is too dangerous.
Thanks for saying so, but I've actually come a long way since this was filmed. Check out our "Carolina Surf Casters Association" RU-vid channel for a whole bunch of slow motion casting videos with all different styles.
This set up was my cheap "training wheels" for a few years, so by no means ideal for long distances. That said... -1980s 11' fiberglass surf rod, moderate action, 2-4oz. lure weight, New Concept Guide layout (rebuilt Southbend SeaHawk blank) -Tsunami BFR-12000 spinning reel -20lb. test main line, 40lb. test shock leader (both mono) -4 oz. sinker
I wouldn't say I've mastered it, but I've been casually practicing pendulum casting for about 3-4 years now. Very minimal amount of time spent. I'd say someone else could get just a good if they practiced 2 hours a week for two months.