Penn Spinfisher V 4500 fishing reel retreive issue problem diagnosis and repair 

my reel has this issue, I tore it part 10 times and it works for about 5 minutes and ends up going stiff again on the retrieve. it did this out of the box. glad I finally found a video to get this taken care of

Good video 👌. That exact wear is caused by still reeling while the fish is taking line or when drag is working ... Try to only crank reel handle when gaining line , not when loosing line ... 👍

Thank you Dennis for another great video and sharing your expertise. The diagnostic and repair portion of this video was great.

I have two 3500 spinfisher v's for all my inshore fishing. I work these reels very hard when I'm at the coast so if mine start to bind up I'll know what to do. Thanks Dennis!! Enjoyed!

Thank you! I’ve been having this same issue with my V4500. Very frustrating. Although I have not ordered the replacement part I was able to smooth the flat spot and returned it to working much better.

Another awesome vid Dennis - I have the Spinfisher VI 4500 and they have changed the design on the crosswind block.

I have the 5500 and love it, the only thing I’ve done is upgrade the handle knob to a Gomexus. The bigger knob helps me pull Stripers up with ease and looks more like a slammer. I haven’t opened it up but now I’m going to have to just to regrease and lube it. Thank you Dennis

I have a 4500 with the same problem. Looks like I can fix it now. Thank you!

One of the best instructional videos I have ever seen, much obliged for sharing your awesome knowledge and experience on the field.

Dennis, do you remember my 706Z of mine that you serviced? It also had a problem when load was applied to the reel. Turned out the noise was the line roller on the end of the bail. You know I am so used to surf fishing with vintage reels with an anti-reverse switch or lever that I don’t like reels with an always on AR. I like being able to turn the reel in the opposite direction such as wading in the water to cast and then backing out of the water. It allows me to leave the rig where I cast it as I get out of the water if that makes sense. This video goes to show how close the tolerances are on fishing reels. I think it’s great that this problem could never happen on a Luxor No. 3 or my Mer 52. Great video Demi’s. By the way I am still in a lot of pain but haven’t had to go back to the hospital. I think I’m gradually getting better. --- Chris

I always wanted a Spinfisher, just not sure how I feel about today's models. Thanks for the video.

Great job Dennis,well done. Nice to see an unusual problem.....helps me to TRY and remember to inspect parts more closely,if there was a problem. Your instructions, hints and tips,are once again so usefull,thank you. Stay safe and please keep posting. One quick question,would you have any links to get schematics for Okuma reels?I am having trouble finding the schematics for the ones that I have,thanks.

Had this problem, used the spacers that were included with the reel that go under the spool that are there for this very reason. Under tight drag the spool hits the carriage.

Thanks for explaining the inside to Penn! Unfortunately, mine broke today and I found you here! Disruption of the left main drive and the crank turns! the throttle lever rotates freely!! Can you help me, what can be done? Is this a common problem due to the small/tight thread? (Penn clash 3000) The thread came out of a gear. Is it worth replacing the main gear? I would be grateful for the advice!🤞🙏

Great video.what is your favorite generation of the spinfisher..I like the 4500ss with old style anti reverse..red bearing cap..

good informative vid! I maybe buying two brand new (never used) penn spinfisher V 6500 and an 8500 for fishing from the beach. Just curious on how these hold up and if they are worth it? $280 for the both of them.

I have a spin fisher VI 4500LL with similar problem. Typically used in river with 3-4oz sinker. If I catch even a small perch it is troublesome to reel in. I haven't used in about a year due to this. Do you have any idea what causes this problem?

Hi, great video and very informative. I have brand new Penn clash CLA4000 ( it’s been used for couple ours in total for lure spinning ). Now, I have noticed since day one some strange behavior- when reeling under load I have a very rhythmic knock/vibration and stutter sound. You can also feel this sound. It is worse the faster you retrieve and if reeling super super slow you can’t really notice it at all. Any idea what to check ( return to shop isn’t an option because it’s bought in Australia and I’m in Europe ) Best regards

Love the channel! Thanks for sharing your wisdom.

First comment Award......Seems like the older spinfishers were built better.

I love the Spinfisher V's

Enjoyed the video. Thanks Dennis

Dennis do you know if the Battle 2 has that similar design for the crosswind block? Mine acts exactly the same way and I thought maybe it was the shim washers between the main gear and side plate. Could that be caused by the track that the crosswind block rides in?

Hey how are you doing I just updated my 4500 v spinfisher to cnc gear and pinion now it’s hard to turn I had it apart many times any ideas and I do have instructions on what I have done

What is the name of the part you changed the name of and where did you buy it. Thanks sir

Appreciate it brother. Thanks again

Thanx uncle Danny 😉

Is this a good reel

Well friend you can take the little bushing and order a barring for this

✌️😎👍👍👍👍👍👍👍👍🇵🇹

You know the world has really gone cheap when a company like Penn starts making reels with no anti reverse release.