Looking good on your maiden flight. I did mine a couple of weeks ago and it needed very little trimming. I added a reflex gyro in the position shown by FMS and put my rx above it on a thin fly platform after cutting out the canopy floor of the rear pilot area to create space so the battery runs below the platform a little. I then replaced the foam with a grey painted 1mm balsa cover( not visible from side view ). I got cg at 90 to 95mm using 3300 mah 35 to 70c nanotech ( 510 gms )or Admiral 4000 mah 40c.(560gms) AUW 1930 to 1980gms. Takes off from grass half flaps no problem. I have not used any elevator to flap mix. My high rates are very similar to yours and I just stick 50% expo on everything. I have increased the amount of yellow to include some of the nose area, rear of canopy, wingtips, fin tip and rear stab leading edge to assist visibility on the grey days 🙂. It will stall as per Two Bros excellent video and I just neutralised the sticks and hit full throttle to increase airspeed and recover no problem . ( yes I tried it high up !!)
Yeah that’s a very cool little jet for sure and thanks my buddy !!!! Do you have one too ?? If you want one you can order it with my link www.fmshobby.com/FeYKZYrJINBwLe And use my code ArthurRC to get 15% off 🥳
@@ArthurRC I had the Viper 90mm and it crashed totally 2 days ago :( I think there was a battery issue and I lost control completely. It dived into the ground at high speed :( Getting the FW Cougar instead
Tout simplement pour pouvoir régler le trim de la roulette sans changer celui de la dérive 😊 et j’associe la voie de la roulette avant sur le même joystick que la dérive 😇
@@ArthurRC thank you man ! I’m currently pretty beginner and am on a Habu SS 70mm, wondering which to go for , or maybe BAE Hawk - what do you think ? Looking for long term development!
@@JMTerry1984 yeeees very good choice FMS Hawk 80mm is an awesome second jet for sure and if you’re in the USA you can buy it with my affiliate link www.fmshobby.com/FeYKZYrJINBwLe And use my code ArthurRC to get 15% off !!! 🥳🥳🥳
C’est ce que j’ai deja utilisé en spray oui c’est top ! Mais garde bien 30cm de distance hein…et j’avais trouvé une autre marque pour du mat, sur Amazon mais c’était y a longtemps je me souviens plus désolé
@@fino083 oh merci beaucoup c’est super sympa 🙏🏻🙏🏻 n’hésite pas à partager ma chaîne avec tes amis 😊 et si tu veux agrandir ton hangar tu peux utiliser mon lien chez turbinesRC (faisons marcher nos commerces français 🥰) www.turbines-rc.com/fr/?aff=4
Hello ! L’expo est qqchose de très personnel…je n’utilise jamais d’expo je trouve ça pas réaliste, à la place j’utilise des petits débattements…c’est un choix 😇
@@ArthurRC super merci beaucoup pour ta réponse je me demandais si c était juste un rebranding ou pas...et continue comme ça... Super contenu à chaque fois 🤙
@@clearedtoland4627 merci beaucoup ça me fait vraiment plaisir 🙏🏻🙏🏻🙏🏻 si tu veux acheter des jets ou autres tu peux passer par mon lien (ce ne change rien pr les clients mais ça me permet de toucher une toute petite commission sur les ventes que je génère 😕) www.turbines-rc.com/fr/?aff=4