Video sahi but.. u should also explain .. the chemistry behind this... Otherwise.. there is no use of this experiment... This could also be done by 5 class student.... So please explain via chemistry..and the chemical reactions behind this ... This will also make your video more informative and interesting...
ahut achcha chemicalchemistry ka experiment karake bataya hai / isame organic chemistry ke sidhdhant lagu hote hai jo chemistry samajhane walo ke liye upayogi hote hai / petrol ek tarah se bonding material ka kam karata hai aur hava me mil jane se jab substance sukhata hai to jodane ka kam karata hai / apane chemistry ka yah prayog karake ek tarah ki aham janakari di hai isake liye dhanyavad /
Cyanoacrylate reaction with alkanes (petrol).. Acetone or nail Polish remover in pure form can be used to remove the Cyanoacrylate adhesives effectively.
Result...feviquk lost its property of sticky effect to stick object but petrol remain it's burning property after this reaction (when feviquk frequently mixed with the petrol)
Bro it was producing a lot of black smoke, which is soo harmful for the environment. Please avoid these types of experiment. By the way the video was interesting.......... Peace 😊
First youtube blogger i have ever seen who never begs for like , comment, share and subscribe, still he has 2.5 m subscribers . Moral - begging like, comment , share and subscribe should be declared torture to viewers.
University of Houston researchers discover a catalyst that may make commercial-scale hydrogen extraction from water possible. Hydrogen, hydrogen everywhere. (MIQUEL FABRE) Hydrogen is known to have the potential to become an important source of energy. And there's an abundant supply of it, in our water, if we can just find a low-cost, efficient way of getting the oxygen in H2O to let go of it. The University of Houston (UH) has just announced that they may have just found it. Splitting the hydrogen and oxygen in water is accomplished using a process called “water electrolysis" in which both the hydrogen and oxygen molecules separate into individual gasses via separate “evolution reactions." Each evolution reaction is induced by an electrode in the presence of a catalyst. Water can also be split using photocatalysis that uses solar power directly instead of electricity, but it's less efficient since water only absorbs a small range of the light spectrum. It's been the lack of an efficient, low-cost catalyst for the oxygen molecules that's been holding the full-scale extraction of hydrogen back. Up until now, oxygen catalysts have been based on scarce, expensive “noble" metals such as iridium, platinum, or ruthenium. This is a problem that has been thwarting the full-scale commercial extraction of hydrogen for energy for some time, and UH isn't the only entity searching for a replacement. Just last spring, the Canadian Department of Energy's SLAC National Accelerator Laboratory and the University of Toronto announced the discovery of a new oxygen catalyst gel based on iron, cobalt and tungsten that triggers an evolution reaction in oxygen three times faster than previous catalysts and retained stability through hundreds of reaction cycles. The catalyst developed by UH, however, remains usable for more than 20 hours and 10,000 cycles in testing. According to Zhifeng Ren, one of the scientists involved, “Some catalysts are outstanding but are only stable for one or two hours. That's no use." The UH catalyst is a powder of ferrous metaphosphate grown on a conductive nickel “Cost-wise, it is much lower and performance-wise, much better," says Ren. The UH team making the discovery was comprised of Paul C. W. Chu, Ren, Shuo Chen, post-docs Haiqing Zhou and Fang Yu, and grad students Jingying Sun and Ran He. “In this work, we discovered a highly active and stable electrocatalyst based on earth-abundant elements, which even outperforms the noble metal based ones. Our discovery may lead to a more economic approach for hydrogen production from water electrolysis," Chen asserts. The UH team writes, “Hydrogen (H2) produced from water splitting by an electrochemical process, called water electrolysis, has been considered to be a clean and sustainable energy resource to replace fossil fuels and meet the rising global energy demand, since water is both the sole starting material and byproduct when clean energy is produced by converting H2 back to water." It's also easier to store hydrogen than solar- or wind-derived energy.
University of Houston researchers discover a catalyst that may make commercial-scale hydrogen extraction from water possible. Hydrogen, hydrogen everywhere. (MIQUEL FABRE) Hydrogen is known to have the potential to become an important source of energy. And there's an abundant supply of it, in our water, if we can just find a low-cost, efficient way of getting the oxygen in H2O to let go of it. The University of Houston (UH) has just announced that they may have just found it. Splitting the hydrogen and oxygen in water is accomplished using a process called “water electrolysis" in which both the hydrogen and oxygen molecules separate into individual gasses via separate “evolution reactions." Each evolution reaction is induced by an electrode in the presence of a catalyst. Water can also be split using photocatalysis that uses solar power directly instead of electricity, but it's less efficient since water only absorbs a small range of the light spectrum. It's been the lack of an efficient, low-cost catalyst for the oxygen molecules that's been holding the full-scale extraction of hydrogen back. Up until now, oxygen catalysts have been based on scarce, expensive “noble" metals such as iridium, platinum, or ruthenium. This is a problem that has been thwarting the full-scale commercial extraction of hydrogen for energy for some time, and UH isn't the only entity searching for a replacement. Just last spring, the Canadian Department of Energy's SLAC National Accelerator Laboratory and the University of Toronto announced the discovery of a new oxygen catalyst gel based on iron, cobalt and tungsten that triggers an evolution reaction in oxygen three times faster than previous catalysts and retained stability through hundreds of reaction cycles. The catalyst developed by UH, however, remains usable for more than 20 hours and 10,000 cycles in testing. According to Zhifeng Ren, one of the scientists involved, “Some catalysts are outstanding but are only stable for one or two hours. That's no use." The UH catalyst is a powder of ferrous metaphosphate grown on a conductive nickel “Cost-wise, it is much lower and performance-wise, much better," says Ren. The UH team making the discovery was comprised of Paul C. W. Chu, Ren, Shuo Chen, post-docs Haiqing Zhou and Fang Yu, and grad students Jingying Sun and Ran He. “In this work, we discovered a highly active and stable electrocatalyst based on earth-abundant elements, which even outperforms the noble metal based ones. Our discovery may lead to a more economic approach for hydrogen production from water electrolysis," Chen asserts. The UH team writes, “Hydrogen (H2) produced from water splitting by an electrochemical process, called water electrolysis, has been considered to be a clean and sustainable energy resource to replace fossil fuels and meet the rising global energy demand, since water is both the sole starting material and byproduct when clean energy is produced by converting H2 back to water." It's also easier to store hydrogen than solar- or wind-derived energy.
Bhai mr Indian hacker se toh acche aap hi ho maine usse kitni baar bola ki bhai hamara bhi ek experiment kardo boiling oil me Colgate dal ke dekhte hai ki kya hua bhai meri aapse haath jodkar yahi binti hai ki aap Mera yeh experiment jaroor karna bhai dekho mujhe 3 ya 4 saal go Gaye me aapki hi video dekhta hu please yaar us experiment Ko jaroor aur jald se jala karna please