Peugeot 208 Front Brake Pads & Discs (Rotors) 

You made that look so easy. Thanks for the video, I'll be doing my own brake pads soon so this is very handy!

Great video, helped me do mine. My 4 year old 208 with 55,000 miles on it needed new discs and pads. The T55 torx bolts were VERY tight. I had to borrow a very long breaker bar from a mechanic friend and even then twisted one drive bit rather than turn the bolt. Other than that, it's a doddle.

One of the cleanest videos I've seen. It has give me the confidence to try and do the brakes myself next time. I have the peugeot 208 gti. I am guessing it is the same procedure. Cheers

Thanks for this video. It has saved me a small fortune.

Excellent channel, subscribed ! 👍🏻

Cheers and thanks for showing best practice with cleaning and greasing!

Great video! Well explained and very clear 😁👌

Really informative video. Would this be the same process for the 2008 seeing as though it's the same chassis? Asking for a friend 😂

Brilliant thanks for your informative video ..doing mine tomorrow

hi wound like rear brakes 208 2013 pad`s could you show how, do they come off easy because of handbrake does this get in the way?

Great vid Rob...…...like ya style and thanks

Good stuff, the key is not to repeat yourself too much. But show different kinds of repairs. Love your channel :-)

Thank you very much for this video, really helped a lot, I recently bought a 208 and I’m looking forward to catch an eye on it’s brakes. Had a look at the tools needed, so thank you very much

Brilliant video. Thank you

If you don't mind me asking, which brand brakes did you use?

Any chance of a service guide for the 208 please

Are the discs and pads the same for a 2008 ? Also do the rear brakes on a 2008 come with the wheel bearing as part of the disc ?

Cheers Rob great video Now i know no horrible surprises re specialised tools and the like when i jack the car up to do the brakes!!!

Really helpful ! Thanks a lot !

Excellent video simple and informative. One word to the wise from an editing perspective. The music is very loud compared to the rest of the audio when I've got it cranked up to hear you, then you throw the music on nearly burst my ear drum! Try to adjust the level the music comes in at so its more consistent but other than that love it

Very good video, could you make a video on the rear pads and discs when you get the time...thanks

Great video!

Great video. Thanks.

Make it look easy BIG THANKS

Hi, That was a great video, to replace the rear pads and discs on the 208 is it generally the same process? Thanks, James

Does anyone know if this will be the same process for a 15 plate 108?

Great video

Hi what are the socket types and sizes needed 🤔

How do I contact you for your service? I need few things sorting out for Peugeot 208 car.

hi im going to change my rear brake disks on my citroen c4 grand picasso 1.6 vvti on purchasing the parts i choose brembo at euro car parts very good price but i noticed the the wheel bearings are built in to the disks them self which i thought is very stange because of the heat build up that could couse the bearings to fail wht would be the proper torq spec to tighten them up and whts your thoght on the way these are designed thanks your vids are very in depth thanks again

good video do you need to use thread glue when replacing caliper and carrier bolts??

Thank you !

Yep good vid. are the torx the same size on a rear caliper carrier?

Good job

When's the next video out Rob?

Do you Haven video from rear?

Thancks for this Vidie

Do you not to check the torque on then wheel nuts when putting them back on? if so what is the manufactures torque setting?

also how easy is it to replace the hardwear on the front discs as my pads came with the metal clips. ..cheers

Is there any way to make the part of the discs that is not clamped by the brake pads stop corroding. Did my discs a couple months ago and it has already corroded there.

Over here pads come with clips so theyre no reused. In fact reuse usually leads to brake noise which means a rework. Where I am theres so much road salt reuse isnt an option. Did your set come with clips or is that an extra order item there?

Yeaa finally someone that used kopperpaste.

Does the Pergoet 208 have break calipar covers? Because mine builds up breaks dust very quickly.

Great video! What is the brand of the disc and pads, please?

What are the rubber sleeves for on the top caliper pins?

I was checking my cars suspension yesterday and it looks like someone have messed with the front brakes before as the 2 passenger side brake disc's retaining screws are missing and on the drivers side the 2 brake disc's retaining screws look like they have snapped off and stuck in the hub. When I change the disc's and pads how would you remove the retaining screws and what brand disc's and pads would you use. My local motor factors sells apec brakes which I want to avoid from past experience so the other brand they sell is quinton hazel which would cost £61 for disc's and pads.

bravissimo grazie

What did you torque the carrier & caliper bolts up to?

Special tools in the boot for those caps

Im sure if you keep making as good videos as these on different repair jobs you will soon attract a lot of advertising revenue and be able to give up car repairs and turn your workshop into a car repair studio. Does that appeal or would you miss the seized and stripped bolts, skint knuckles and meeting the public? :-)

Excellent video, but you need a face mask because you are brushing brake dust. Other than the mask 10/10.