Pfister F042JDKK Jaida Faucet Quick Review and some Maintenance Instructions

Подписаться 25 тыс.

Просмотров 49 тыс.

50% 1

Buy here: www.amazon.com/gp/product/B00...
This is a Quick Review and Maintenance Instructions of the:
Pfister F042JDKK Jaida Single Control 4" Centerset Bathroom Faucet, Brushed Nickel, 1.5 gpm
Quick facts:
Pro:
- Nice look
- Works great most of the time
- Rather affordable
Cons:
- heavily squeaking after only 2 month (which required this maintenance)
- some water flow along the bottom of the nozzle which can even lead to water flowing backward on the counter-top which is clearly a construction failure
- Instructions are very very very (...) poor and don't show all the details which are needed to install and maintain this faucet.
- support was somehow OK, but they do everything to eliminate bad reviews. Two of them were eliminated from the Home Depot site.
~-~~-~~~-~~-~
This is my NEW storefront on Amazon where you can find all my recommended FAVORITE products:
www.amazon.com/shop/allchecko...
Thanks for supporting my channel to keep it alive!
~-~~-~~~-~~-~

Опубликовано:

2 июл 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@JanetJenkins 6 лет назад

That's great information. Thank you!

@allcheckout 6 лет назад

Thanks for the positive feedback ;-)

@willischung6407 2 года назад

Thanks for making this video! I needed to take the cartridge out to see if there was debris in the hot water channel. Turns out it was clean, but there was debris in the screen at the bottom end of the copper piping where the water connection is made.

@allcheckout 2 года назад

Very interesting - thanks for the feedback.

@frankhennefer861 11 месяцев назад

I've experienced a similar problem and needed to clean the screens. I also flushed the supply lines into a small bucket. My experience with the Jaida, I've installed over a dozen, the screens easily collect sediment and slow or stall pressure. The upper cartridge should be replaced when there's a drip.

@bp6992 4 года назад

For anyone that wants to know, I figured out that the hex key size is 3/32 in. to remove set screw. The metric hex keys sizes of 2mm and 2.5mm did not work for me. Update: I tested it again, this time with the handle already off. 2mm is too small. 2.5mm is slightly too big. 3/32 in. is the perfect fit; 3/32 in. is about 2.38mm.

@allcheckout 4 года назад

Interesting - thanks for the feedback!

@bryanbsa8094 3 года назад

Thankyou

@cliffbernsen438 2 года назад

2.5 fit mine perfectly

@sonjagettel1201 2 года назад

Thank you!

@jasonnaso8175 4 года назад

I had an issue where the hot water would not turn on. I contacted Pfister and the rep said it was a cartridge issue and sent me one. That was not the issue. There is an aerator or screen where the hot water enters the faucet. That was clogged with slime of some sort. I have well water. Just FYI in case someone else has the issue.

@allcheckout 4 года назад

Awesome - very helpful - really appreciate that!

@abrammorris8450 4 года назад

were you able to fix this, I also have well water - same problem. This video is way, way too slow and verbose

@willischung6407 2 года назад

I also had this problem, but with Las Vegas city water (very hard). Easy to clean out the screen once you disconnect the water supply line. A few flicks of a fingertip along the screen cleared the debris, and all is normal now. Thanks for that tip!

@josephst.george3794 Год назад

Was this screen accessible without removing the faucet? I have the same issue right now.

@ankitgu56 2 месяца назад

Was this below the counter (where the two pipes connect) or above the counter?

@elsarivera6950 3 года назад

Very helpful

@allcheckout 3 года назад

Glad to hear that

@jackrowell849 8 месяцев назад

Mine would squirt you when the water was turned on. I had to remove the screen where the water comes out. I used the Allen wrench that I took the handle off with to scratch it out. The screw on the top of the stem he says is useless, do not remove it. It’s what the set screw seats on to hold the handle.

@allcheckout 7 месяцев назад

Interesting - thanks for sharing here! 👍

@Silvertinge291 5 лет назад

How many cartridges have u had to use?

@allcheckout 5 лет назад

Just replaced it once and still ok now. Seems that just the original was crap :-(

@Silvertinge291 5 лет назад

@@allcheckout ok Mine is bad too Disappointed

@allcheckout 5 лет назад

@@Silvertinge291 Did you already contact PFISTER to get a replacement part?

@mikegetter4117 4 года назад

Hi can anyone plz explain to me how the handle suppose to fit firmly w/ out popping up.every time you turn on the water I tried everything I even messed w/ the little little small screw also the screw in that black plastic piece which looks like that little little holds in place Any help will be greatly appreciate thnx in Advance guys Chris

@adibtheman 3 года назад

How do you remove and clean the aerator?

@bentebbens 3 года назад

I pryed it out carefully with a small, tiny glasses type screw driver and then cleaned it with an old tooth brush or similar brush. I ended up leaving it out after having to do it twice now but now it seems the "cartridge" is clogged, thus why I'm watching this video. Ugh, not sure Pfister is the best product or not. Had just cheap ones in the past and never had a problem like this before.

@marilynford3005 4 года назад

How do you clean the filter

@allcheckout 4 года назад

Sorry - never done, sold the home before I had to clean the filter ;-)

@JustinCase380 4 года назад

Mariln, did you ever figure out how to clean the filter? I have the same question/problem.

@michaelcleary249 4 года назад

Too general Pls show the actual taking apart -

@bobbynova5177 4 года назад

U talk talk too much and you showed nothing.

@allcheckout 4 года назад

No problem - always happy to help ;-)))

@heatherwhite2381 3 года назад

Be nice - jeez.

@bentebbens 3 года назад

@@allcheckout thanks so much for taking the time, means the world!

@allcheckout 3 года назад

@@bentebbens Thanks - really appreciate your nice comment 💖💖💖

@jsnz1178 3 месяца назад

WHY, in gods earth, did you NOT REPLACE THE ACTUAL CARTRIDGE....Talking about it is no good without ACTUALLY doing thejob. PS just turn the waree off so you do not get wet

@allcheckout 3 месяца назад

OK ... can't remember ... it's very long ago

@bryanbsa8094 3 года назад

What a complete waste of time. 👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎

@allcheckout 3 года назад

Always happy to help for free and getting offended and no need to say thank you