PHANTOM 85 LAST RIDE 

😂 Its fixed and still running lol but it was "a piece of junk" for a while👍

Haha! Thanks for noticing my "riding pants"! Thanks again for watching

Gracias por ese consejo👍 Ya lo saqué de la bici porque el engranaje que mueve el cable estába dañado

De nada amigo

La cámara normalmente está en mejor posición pero se movió cuando estaba pedaleando. No me di cuenta hasta que vi el video. Saludos desde PR!

Thanks bro! I can always put a YD100 upgrade cylinder kit on it 😡

I was wondering can you just get a wrist pin and bearing and stuff from a yd and put it in it to fix the problem

@@Littleevil9975 the stock YD has 10mm pin and the Phantom has a 12mm. For now I just bought a bushing for a vespa moped that will fit. I'll let you know how it turns out.

O ok I see didn’t know that

@@Littleevil9975 when I take apart the Phantom 85, I'll make a video comparing the differences between the it and the YD100

That would be great but I doubt it. I don't think I will buy another especially not from bicycle-engines.com

@@mybikes1970 they fixed it

@@user99524 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CxpXNG1iGIk.html I know 😉🙏🏾

Soy de Aguadilla. Saludos!

No compre ese motor. La potencia y torque es muy buena. Usé un sprocket de 40d y puedo subir cualquier cuesta y es muy rápido (más de 65 km h) pero la calidad es horrible. El buje de la biela y los anillos del pistón tienen un diseño defectuoso. Si el costo es barato, puede comprarlo y cambiar los componentes defectuosos, pero ya no vale la pena.

@@mybikes1970 Muchas gracias por la información,, saludos

@@elpepewow4825 de nada bro👍

@@mybikes1970 Feliz año broo

@@elpepewow4825 gracias bro! Feliz año para ti también

That's good news. It should be much better now but I don't want another one 😉

A veces sí 😁

Four 3.7 lithium batteries

The KTM is fast but has a weak transmission compared to the manual clutch on that phantom motor.I can go up hills easier and for less than $30 the problems are already fixed. Thanks for watching👍

Remove the cylinder and inspect the piston and bushing for wear. It will run fine and strong right until the last moment before disaster strikes.

Ya cambié el bushing

Bueno, para el futuro, si necesito ayuda para construir, se lo haré saber

No. Maybe 3/4 throttle,40T sprocket and I think I only hit 30mph. I weigh 173lbs

@@mybikes1970 Damn bro that's it ? I got a anbull "100" cc and with a 44 tooth I hit 43 top rip and its all stock all I did to it was cut a hole in center of air filter

@@joneserupinsmoke9161 Lol that's as fast as I was willing to go Bro, too much vibration over 37mph and I couldn't feel my feet on the pedals. I thought about an Anbull100 but for now I am done buying 2strokes.

I dont know when these issues occurred or if they are true but I keep getting comments that the motors might fail. There is a video on youtube of a guy diagnosing the bearing and maybe I will make a install video

@@mybikes1970 please do!

You need brass not that fake aluminum. The bearings for this piston and rod are 12x14x15

@@jaayse I already ordered a bushing as soon as I found out about the issue. It should arrive this week. Thanks👍

Parts for these aren't available yet, ya might want to fix it before it comes apart on ya.

At that time, I used 24:1. When i rebuilt it, I used 16:1. I think it's better for the wrist pin bushing, so it doesn't get worn out too soon.

@@mybikes1970 Bro and I just looked in muffler all the installation is blowing out of it and again we're talking only like six rides that were only for 15-20 minutes at the most girl these kids are disappointing me left and right

@@joneserupinsmoke9161 I wish I could have warned you before you bought it bro😔

@@mybikes1970 Bro I just watched a clip .pop in does my two stroke run hotter with 50 to 1 or 25 to 1

@@joneserupinsmoke9161 if it's not lubricated enough, it will cause more friction and run hotter. But that's just my opinion.

It has more power than a YD100. It's a YD100 on steroids. But for now, they are unavailable due to poor quality piston pin bushings

@@mybikes1970 I see. Thanks for answering.

Bro hell yea it kills yd 100

But it all depends on what ur looking for the 100 with rite set up hits really good top speed for what I heard on utube but as a plug and play with 44 tooth sprocket or 36 rite out the box definitely sweet.i like engine where it has good power and dnt have to go crazy on getting it up there until u want to ya kn