philips 42pfl4606h/12 tv works 1 hour sometimes 10 minutes sometimes 5 minutes tv turns off 

Your a freaking STUD my man, great video and even better communications/explanation of process from start to end. You saved me some serious green backs brother... Keep it up and make some more vids dude. I believe you may have found your calling buddy. I said the same exact thing about @chrisfix when he first started his RU-vid channel for explaing and showing vehicle repairs and now look at him man, he is now the 2nd largest vehicle repair channel in all of RU-vid with millions of subs, likes, comments, and donations to motivate him to make more vids. Don't let us down brother we are all here waiting for the next one brother. 👍👍🙌

Big thanks for this great video! Helps a lot of people who won't leave their tv directly to the trash bin. Saves environment also.

Great video. The applause at 23.00 minutes was great timing. That was for the work done :-)

I had the same problem with my Philips TV. It is not easy to pull the old IC out and change it with a new one without good equipment. But at the end it all worked out fine. Thank you so far for this good video.

Turkiyeden selamlar.Bendeki philips 5h/12 modeli, besleme devresi de aynı, sorun da tamamen aynı.Tv yi atmayı düşünürken bu videoyu buldum. Çok teşekkür ederim, faydalı bir video olmuş.

Thanks for your information I saved my TV thanks to you.

Great Skill's Simple And True, Great Job, Like The Way You Work !!!.

Thank you so much! It worked like a charm! Keep up the good work! Cheers!

Thank u so much for sharing ur video, it helps me fix my tv

Merci beaucoup vous avez sauvé ma télé. Par contre j'en ai ch.. ma r...... J'y ai passé 5h, pourtant j'avais acheté la tresse à dessouder et tout ce qu'il faut. Mais bon c'était ma première soudure et je suis une femme 😅. Merci 🙏

Great video. Today, a colleague from work told me that his Philips 37pfl4606h / 58 would switch off after a minute. So I know where to look for a mistake.

As always thank you very much for your shared this video

Great video thank you very very much it fixed my tv thank you very much for advertising with so much details - i replaced the component top264vg like you said and ir works great .

Красивый дефект, здесь главное быстро найти новую и рабочую микросхему ... поздравляю..

Very good video. .thanks boss..

Thanks voor het video's 👍

Very good👍🏻👍🏻. Good Job.

Good work 👍

i had a similar glitch and was able to fix it according to your tutorial. for that i thank you sir.

super gedaan. good job. thank's for sharing

Bon travail 👍👍

அருமையான பதிவு.நன்றி...

in terms of the pin configuration to which pins are the 5v and 3.3 volts connected? Of IC 905(Top264VG)?

I have same problem with Philips 32pfl5604h/12 but power board is different, have you experience this case before? will the eq. FAN7530 be the IC to change in this case? Thanks in advanced!

very good.... tanks for you....

Very good video. I have same issue with 55PFL7900/F7. Power Supply board BA51RCF01021. Do you have any suggestions or video for repairing this one?

Where do you buy spare parts from.

Great Job Man!!!

thank you so very very much for good tutorial sir..

Bravo good job nice video

good works.thank you

excellent work

Thank you very much for the good video, if possible please explain in your language the steps, as sometimes the RU-vid program translates the videos automatically.

Good video, should have shown testing of ic chip

Faleminderit per sqarimin i nderuar te pergezoj per punen dhe videot informuese ne lidhje me TV. Po dasha te pyes si te gjejm lokalin, ku mund te sjellim TV per rregullim ?

شكراً لجهودك الطيبة ومعلوماتك القيمة... Thanks for your kind efforts and valuable information.

great video

Have had a similar problem with my 47PFL6007T model. Would shut down randomly and turn on again once in a blue moon, but suddenly one day it would happen once a minute. My 3.3V on the power board stayed on when it shut down, so started thinking there was probably some safety shutdown from the main board. For some weird reason leaving the wifi circuit disconnected from the main board fixed the problem for me. The plug is accessible just by taking off the service panel, 1C31. No idea if it will work for others, but since I haven't seen this "fix" online anywhere, I thought I'd share. I've never used the wifi on the TV, so probably won't bother looking further into fixing the underlying cause. I guess there's still an issue with the board, but disconnecting the wifi was enough to keep it under control.

Good day sir if led backlight is 3v can i replace 6v? Thanks

I have a problem with starting the TV with the remote control from standby mode and the button on the TV. Sometimes you have to press the power button 30 times for the TV to turn on. What could it be? Do you have this arrangement?

Thanks form Türkiye

Tebrikler. Güzel çalışma

Bravoo o mjeshter ! Ne cfare vendi e ke servisin .. ne tirane apo me ndonje qytet tjeter ...

Great thanks nice job i have the same problem whit my tv philips 42 turn of after 2-3 min, you think its be the same problem.?

I have a manual multimeter, i know if its showing 1 that means the measured voltage is higher than the unit i selected but what if it's not showing any voltage while the TV is working? (like 000) is there any way to fix the board (because as i understood that means there is a problem with the power) or that board is already beyond saving?

Good job

Hi nice job bye

Super!! Merci pour cette vidéo!! Je m'abonne!! Problème résolu chez moi grâce à vous 👍

i did it thank you!

I like this. My TV has the same problem

bon dépannages bravos

How many volt that to feed that ship

Hello What is the name of the movie

I have the same issue on 43pfs5301/12, I have not open yet the TV to check it, can this be same solution on 43pfs5301/12 ?

Bonjour, merci beaucoup, super vidéo, marche aussi pour une tv Philips 42PFL3605H/12 le composant en cause est un TNY277PN, ma télé marche à nouveau top

thanks

Where to buy this ic please

I have problem with my philips 55pfl7108k/12 they work 1 minute then out and then work 1 minute then go out.can you say what the problem? Thanks

Спасибо,добрый человек,без слов все понятно ! Болтуны надоели...

Mega :-)

Very good

Very. good

I have been repairing tv's for a long time now and this is a minor fault, the newer tv's have been designed way beyond this becoming a common problem and are far more difficult to repair these days.

Good

👍👍👍

Thanks for video. .but u can explain English. .

Good job, gentleman!

perfect 😃😃😃😃😃💗💗

Sur quel site commandé le même composants stp merci

Same problem on my 42PFL9803H/10 What can i do?

👏👏👏👏👏👏👏

Grazie

HELLO, YOUR VIDEO IS USEFUL I HAVE A PROBLEM I RENEWED THE TOP264VG IN THE CIRCUIT I REFUSED THE MF CAPACITORS AROUND IT, BUT THE TOP264 IS STILL HEATING AND THE TV TURNING OFF IS IT FROM THE QUALITY OF THE INTEGRATED?

@0:22 Is that a lg or samsung tv ?

Hii,my philips tv wont turn on just the power light blinking 3x times. Whats the problem do you can help me Sir?

Ok 👏

so its not always the mainboard.could be the powerboard instead

What causes that

Yo tengo uno igual pero solo le cambie la fuente y funciona bien, pero el problema que el contraste lo da solo a la mitad 😢

ып, ап, мып, тып, гык, мык...

Led ka panel riper karke dikhe

Albanian 🇦🇱 subtitles?

Видео редко выходит...

Happens to my technika

Sounds like a caveman is repairing the TV. I expected to see him club it. Good educational video though.

this happen on my tv the voice gone there's no voice like this after 1 min 5 min 7 min

And also this is an unsafe and dangerous way to work on a tv.

Got the same problem but different model TV will check the 5 v supply thanks very much.

Good job