Thanks for the vid. But to remove any confusion for new users...should we insert the sd card to our pc or printer for the saving to occur? Might be straight forward to many users here but for me, Im abit lost lol
I have a cr-10 v3 but I tried every thing but when i start the printer .. it gives 62 degrees bed temperature even when its 19 degrees .. en 51 nozzle temperature .. it wil not go lower ...
You could add in the future your link to the video on how to download and install the program... I had to read comments to find out that you have a video on how to do that...
After the "M303 E0 S200 U1" Code Pronterface sends message "echo: busy: Paused for user" Not sure what it means and not sure if it understands any code I sends after, since it repeats that message forever till i disconnect. I think i may saved the command but not 100% sure it did. If anyone know anything about that let me know Thanks
Hi my CR-10 older version I put a creality spider 4.0 on it and when I try to PID Tune it only gets to 134c then I get the E1 alarm and printerface says error printer halted kill0 called.? What is going on I have no clue and am a total newb to this please help
Hello, I have an ender 3 my bed temp keeps going up and wont stop, I replaced the board main board replaced the hot bed thermistor and its working.. The voltage going to the heating element for the bed keeps going there is no way to stop it on a set temp. I have also done a PID and everytime I try to do it for the bed i get PID Autotune failed! Temperature too high echo:Unknown command: "05". Any suggestions?
Gonna get my shit together and do this soon, just got my ender 3v2 and its up and printing decent so i havent let it stop long enough to follow your series to really tune it up. Great content
Mine came out of the box and did decent as well. When I failed on my 16 hour print that's when I decided to go all in and tune up everything. It has worked incredible since then, I rarely have any issues printing. Thanks and I am working on some new content as well just been getting my time lapse better with octolapse it's pretty sweet.
Hi, Im having a problem this endless loop. any idea on how to solve my problem please. Echo busy paused for user ECho busy paused for user ECho busy paused for user
anyone else having issues having the computer see the printer? every time i connect it, i get a error and cannot find a way to fix it or even a driver online any thoughts? found the solution in the install video.
In pronterface in the port drop down menu it isn't showing anything its just blank, my printer is turned on and connected to the laptop via USB cable, any ideas why nothing is showing?
I have had this happen before, I had to move around ports and sometimes cycle power on the pc and or printer. You might also try this link for drivers: support.th3dstudio.com/hc/en-us/articles/360043291432
@@rainmaker3d spot on thank you 😊 it was the driver. I've replaced my glass bed as it was warped with a magnetic one, so I'm working my way through your videos to fine tune the printer now 😁😁
My students had this same issue on a base ender 3. For some reason this command does not work on an Ender 3 but will on a V2 I would just move on to the next calibration steps. That is what they did and their printers work good now, the bed is not as critical to tune as the hot end.
@@adrenalinejunkie6797 as of right now I don't. I start teaching my cnc course again tomorrow so I will work with my students on a fix. If we come up with one I will let you know.
