Application procedure for severe Dampness'Grid marking up to 3feet level ,wall cutting & broken up to red brick level Clean the Brick surface with wire brush and remove the entire loose particle's Fill brick gap with polymer modified mortar make with Dr.Fixit Super LatexClean the surface with water and bring it in SSD conditions Remove liquid in bucket & Slowly mix powder in liquid ,Mix with hand mix machine .Please ensure full quantity in one time.Polymer & Powder mix aquarately. Post mixing lets it settle 2-3 minute'sApply first coat of Pedifin 2K on brick surface,let it dry for 4 to 6 hours.Apply second coat of Pedifin 2K ensure it is applied 90 degrees to the first coat .Sprinkle sand coats tacky let it dry for 4 to 6 hours.Apply Dr.Fixit Super Latex mortor plastering the existing wall.1litres Dr.Fixit super latex, 4litres of water ,7kg of white cement applied in plastering area.2Coats birla wall patty ,sanding with machine ,1coat interior primer ,2coats Premium emulsion. Set back area :Excavating the existing floor upto 8''inch later consolidated with water manually, dismantling the old plastering and plastered with Dr.fixit chemicals, pouring m25 grade concrete upto 6", allowed for curing 7 days, laying anti-skid 300 x 300 mm floor tiles for entire area along with sump manhole cover frame by galvanized iron.
Dr.Fixit Autherised Company
Brinda Enterprise Waterproofing
contact no : 98849 99089 / 99402 02723 / 88259 92644.
After Watching The Video ,Please Like And Subscribe & Touch Bell Button
16 сен 2024