No video :(

Pinball Repair "Check Fuses F114 & F115" Error - Diagnose & Replace Shorted Bridge Rectifier BR1

Подписаться 1,1 тыс.

Просмотров 4,2 тыс.

50% 1

Help when Fuse F114 blows when starting up a pinball machine and you end up with the error "Check Fuses F114 & F115". This video walks you through how to Diagnose & Replace Shorted Bridge Rectifier (BR1) on the driver board of a Bally Williams WPC Bram Stokers Dracula. I have included a detailed step by step guide to testing, desoldering and soldering in a new bridge rectifier.
Cut to the Part you are Interested in:
Testing Bridge Rectifier @7:06
Replacing Bridge Rectifier @12:12
#pinballrepair #pinball #pinballhelp
==========================================
Music from RU-vid Library & www.bensound.com

Опубликовано:

18 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@Soapmctowelish 8 месяцев назад

great video! very well made and informative

@PinballEvangelist 7 месяцев назад

Thanks. I am no expert but happy it has helped you.

@stevegouveia9261 3 года назад

Thank you for this! My Theatre Of Magic was doing the exact same thing, and it turned out to be BR2 as well. Really helpful video!

@PinballEvangelist 3 года назад

Thanks for taking the time to post a comment

@Treasurefan02 6 месяцев назад

Thank you so much!

@PinballEvangelist 6 месяцев назад

No problem glad it was helpful.

@kevinnorwood5031 3 года назад

Thanks for posting. Great video.

@PinballEvangelist 3 года назад

Thanks for watching and the support.

@johncarey2048 3 года назад

Great video. My TWZ has this same error and I am going to follow your step by step instructions tomorrow and see if indeed it is the same issue. Thanks!

@PinballEvangelist 3 года назад

Good luck let us know how you go.

@johncarey2048 3 года назад

I did the first series of tests with the multimeter testing j101 and I get .5 readings on all legs. I also did the other test (with the board still in the back box) and there were no issues. I did not pull the board out and check the BRs since I didn’t get any weird readings with the first tests. What do you suggest I try now? My fuses are not blowing, but I don’t have any optos that are registering. One thing to note is that the error message I get is check the fuses, but also says check J112. Any advice?