Ping Pong LED Wall v3

Подписаться 250 тыс.

Просмотров 885 тыс.

50% 1

This Ping Pong LED Wall is made of large PCBs sponsored by: PCBWay www.pcbway.com/?from=bitluni
It consists of 1920 ping pong balls as pixels and is controlled by an ESP32. The parallel data lines allow over 74fps and a camera live feed. The panels are easy to exchange in case of failure and built in bus lines and configurable mounting plates allow to build a display of any shape. My Arduino library provides the LED driver and a graphics interface to draw and display anything.
Mike Harrisons talk: • Mike Harrison - Everyt...
ESP32Lib Arduino library (camera and nyancat are in the exmples): github.com/bitluni/ESP32Lib
SK6812 Datasheet: www.normandled.com/upload/2018...
My store: www.tindie.com/stores/bitluni/
Links to parts and tools (affiliate links):
ESP32 Cam: aliexpress.bitluni.net/espCam
ESP32-Cam Programmer: link.bitluni.net/camProg
RGBW LED Strips: aliexpress.bitluni.net/sk6812...
Individual SK6812 RGBW LEDs: aliexpress.bitluni.net/sk6812
Ping Pong Balls: aliexpress.bitluni.net/pingPong
Meanwell HLG-600H-24A Powersuppply: amazon.bitluni.net/600H24A
12/24 to 5V Power supplies: aliexpress.bitluni.net/24to5
WAGO Nuts/Clamps: amazon.bitluni.net/wago
KF2510 Connector Set: aliexpress.bitluni.net/kf2510
RGB LED chain lights: aliexpress.bitluni.net/wiredR...
Clampmeter: amazon.bitluni.net/clamp
Makita Brushless Drill: amazon.bitluni.net/makitaBL
My camera and lens (4k 60fps):
amazon.bitluni.net/gh5
Zoom H6 Audio Recorder:
amazon.bitluni.net/h6
plz share :-)
Tindie store: www.tindie.com/stores/bitluni
Github Sponsors: github.com/sponsors/bitluni
Patreon: / bitluni
Channel membership: / @bitlunislab
Paypal: paypal.me/bitluni
Twitter: @bitluni
reddit: u/bitluni
Discord: / discord
Music:
Jeremy Blake - Powerup!
Eveningland - Escape
Andrew Langdon - Keys
Vibe Mountain - Operatic 3
Wayne Jones - Brain Trust
Andrew Langdon - Follow Me
Dan Henig - Orange Foot
Jingle Punks - Choose Your Path
Myuu - Falling Rain
#rgb #LED #maker

Наука

Опубликовано:

18 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,4 тыс.

@greatscottlab 4 года назад

What an insane project.....I love it :-)

@Juha-th3go 4 года назад

I'm your fan! and also, Bitluni's fan :D

@MsSATHEESHKUMAR 4 года назад

Me too

@YandiBanyu 4 года назад

Wow, you're here too! Btw, please make electronic basic about antenna?

@rishabhlavhale3096 4 года назад

You should try project like this.. I'm your fan.. :)

@davidrubio8673 4 года назад

The legend has arrived

@d3vastat0r89 4 года назад

His level of patience is too damn high.

@Kai-Made 2 года назад

yup...it is really the bane of my existence. I mean, my impatience with things. The moment his wall came crashing down I would have torched the entire project and washed my hands...lol...glad he did not though this is freaking cool.

@Ryan-ob6gp 3 года назад

+1 for people who would love to see this made available as a kit. It seems like you've got 90% of the problems worked out and nearly a plug-and-play modular system ready to go. Awesome work. I'm doing some work for an arcade that this sort of thing would fit great with - pixel art etc.

@nickw22689 Год назад

I love how he even went through the annoyance of it tipping over and falling apart. Stuff like that happening makes lots of beginners give up. Just goes to show it can happen, and will happen, to people of all levels of experience. Always keep going!!

@madhukeshnp 4 года назад

My heart really broke when the things got broke.... but he still fixed it all over again.... a big thumbs up for the effort ...

@DrZipZwan 4 года назад

lucky the main panel feld with only 4 panels pugged into it....

@bitlunislab 4 года назад

also good the bottom row of cornerpieces didn't break. the 7 pieces carried the whole weight

@RobertSzasz 4 года назад

Still watching, but I wonder if bracket could be soldered onto the back of each panel. With surface mount connectors you could have a full flat black front.

@RobertSzasz 4 года назад

And I wonder if you could use a jig and drill or otherwise cut a circle in the ping-pong balls. (Melting might work too)

@ZsomborZsombibi 4 года назад

Yep , "give up" does not seem to be present in his vocabulary.

@oxenforde 4 года назад

I can imagine the phone call to the toy supplier: "I need 2,000 ping pong balls." [Three days later] "I had a bit of an accident. I need 2,000 more ping pong balls."

@bitlunislab 4 года назад

it's so funny. my last walls already had impact on the aliexpress ai. it always suggests to buy ping pong balls when ordering ws2811 chains 🤣

@honzapat 4 года назад

@@bitlunislab How did you get all of that through clarence, sometimesi have problems with 10 small items, and you manage to sniff thru 2k?(Iam in CZ, but both countries go by the EU orders in that regard so I suspect its similiar)

@QuantumFluxable 4 года назад

@@honzapat you know you can just register your shipment with your local customs agency, right? it costs, but makes it 100% legal.

@JohnDlugosz 4 года назад

Only 1920 as I count it, so he already had some extras.

@honzapat 4 года назад

@@QuantumFluxable At that point, atleast in my case, Iam better of buying it locally. (Not that 20% is much that would still be better, but all the extra they take for processing etc.)

@PCBWay 4 года назад

It's not an easy work, but you made it. WOW~ Really love this amazing project :)

@bubgerkirg 3 месяца назад

your editing is very compelling! i feel like there’s lots of super interesting projects like this on youtube but few of them actually do it proper justice in the edit like this!

@drew6017 4 года назад

I love this so much. I’m surprised it was only $500 for the panels. I was expecting thousands when I first saw how many you got.

@bitlunislab 4 года назад

the corner pieces were more expensive... because of the dips. they cost like 30cents a part. but you could also use solder jumpers..

@lucasimark7992 4 года назад

Yes! Really surprised me too! I‘m really considering doing it as a fixed part of one of the walls of my lab.

@BechirSeven 3 года назад

Why didnt you make a soldring in the place of switches or the jumpers it will cost more less

@royfocker19 3 года назад

bitluni where do you think this could be available to purchase? Or do you plan to share PCB design?

@FMSKremer 3 года назад

@@royfocker19 also interested :)

@sdgelectronics 4 года назад

Nice soldering. I particularly liked the bit where you soldered the floor 😭 Great project

@ArponRoy 4 года назад

Yea, Grate LED project I ever seen. But I like your "LED Clock Project" too and the PCB designing was very inspiring also.

@RandomUser2401 4 года назад

the wiring on the back though.. wow that is just messy as hell

@michaelm9871 2 года назад

Totally awesome. I can't imagine how much work you condensed into a 21 minute video. Not to mention the work done on previous iterations to get to this point. Amazing.

@Senokone 3 года назад

Man i don’t think you get enough credit for the time you took to build this, film and coherently explain everything. This must have taken up a lot of your time. Thanks for that! Subbed.

@juliannesermon8057 4 года назад

I love it how you show the minor and major setbacks! Makes the build so much more relatable because when I build something I screw up all the time. ;-)

@justincastilloux8051 4 года назад

Soul crushing accident. :( I was a bit surprised when you said "on the next day". I think I would have taken at least a day off! Very neat project.

@bitlunislab 4 года назад

I was really sad that evening but it's the emotional rollercoaster is what makes us live

@Team974 4 года назад

So will you be selling full kits ? I’d buy ready made panels that I just plug in and go for my shop easily.

@burnermaster5375 Год назад

I don't know how in all my years of RU-vid searches for my own RGB madness that I missed your channel. I'm glad I came across it today. Great project here! I love it! I'm light years away from making something like this myself, but it is on my bucket list. Excellent work.

@realyunggranny 4 года назад

monitor manufacturers: we can fit billions of pixels in a 20in space, maybe even less! this guy: 4 take it or leave it.

@bitlunislab 4 года назад

loooool

@ranger81de 4 года назад

That's probably the most impressive project I have ever seen. These programming skills are absolutely incredible! Hats off!

@joabfariasgmail 2 года назад

It would be beautiful to play retro games with these pannels. With "one pixel per ball" the games would be interesting to play.

@MrReeTart 3 года назад

I love how happy and excited you get over this project! sensing a lot of passion. Keep going!

@Geo-Shi 4 года назад

I found your version one already awesome, now you can go into mass production :) Modularity is surely the way to go. Absolutely incredible upgrade you did there. The falling bit was heartbreaking, but good to see nothing got damaged beyond repair. Thumbs up man, looking forward meeting you next year at maker faire 👍👍

@TheHookUp 4 года назад

I'm interested to see how the white channel holds up. I've had some SK6812s in a ~20 hour duty cycle for about a year now and the white channel is noticeably dimmer on the "always white" pixels. I assume they are overheating, but not positive.

@tookitogo 4 года назад

The Hook Up If they’re in waterproof LED strips with the clear rubber directly on the LEDs, I’ve had some of those age badly with the heat of the lit LEDs. Pulling off the clear rubber restored the brightness.

@bitlunislab 4 года назад

Mike Harrison also mentions to only use 50% to highly improve the livetime

@uski 3 года назад

Both the phosphor AND the LED unfortunately have a limited lifetime. An interesting example is a router I had where only one Ethernet port was used for years. When connecting another Ethernet cable to another port, the difference in brightness in the two blue LEDs for each pot was totally significant and noticeable, the LED which has been on for years was almost 3-4 times dimmer !

@2000freefuel 2 года назад

no the parts are simply aging, it's the dirty secret of the industry nobody likes to talk about.

@johnsaunders6510 3 года назад

That’s the most work intensive RU-vid project I’ve seen. Amazing.

@chriss2050 2 года назад

check out project binky on youtube

@SegaJennesiss 3 года назад

honestly the best part of the video was seeing you celebrate each success with the build, I felt the happiness with you

@Nono-hk3is 4 года назад

Dude, this is a tremendous design achievement. Great job.

@sqwooker7535 4 года назад

For the amount of effort put into this, it deserves way more attention!!

@Gnomesayin Год назад

This just popped up in my recommended - my jaw was on the floor when the accident happened… kudos to you for working through it! The finished piece is immaculate, and it’s inspired me to keep going on my own projects! Definitely subbed now.

@raresmircea 2 года назад

99 out of 100 youtubers would have transformed that accident into the theme of the vid, with a totally dramatic title and a thumbnail with them holding their head and acting as if the Normandy landing has just failed. Your approach showed what your true goal is here. It’s rare to see people with an actual passion, instead of putting their activity in the service of clout and money 🤘

@chrisw1462 4 года назад

Extremely nice.. great improvement over the last one. I would suggest a grid of light separators, like the one you used to glue on the ping pong balls, but thinner.. maybe thin black cardboard, and only as high as the center of the balls, or maybe a mm or two higher. It'll block the light that's seeping into adjacent balls, and make the image crisper.

@TheAstronomyDude 4 года назад

2:44 11kg of pcbs for $467 seems very reasonable. And how do you pull out a panel in the center? They look flush and I didn't notice any hooks or tabs.

@tiporari 4 года назад

By the balls? Sorry, couldn't help it.

@StormBurnX 4 года назад

20:50 he indeed just pulls them out by the balls

@ServetEdu 4 года назад

They sponsored the video so Bitluni might have gotten the PCBs for free.

@bitlunislab 4 года назад

they don't offer black nor these leds

@bitlunislab 4 года назад

between the panels are small gaps like 0.4mm to compensate for fabrication tolerances. i can slide a tool in-between to pull them out. I'm also able to push them out slightly from the back to get a grip. I used the power holes so far but I will cut away big chunks of the wood to reduce the weight for transportation and better access. i also have a tool made from a coat hanger that fits the mounting holes. pulling them out by the ping pongs is ok for presentation

@chorltonville 2 года назад

Amazed! I almost cried when the wall fell over, didn't you see it was going to happen? Your patience and skills are astonishing. Wow!

@Skeptic2006 2 года назад

I made the panel using pretty thick mdf. It's way too heavy resulting into many broken wires and endless troubleshooting. Your new version looks so clean and lightweight. Good job!

@yep.1106 3 года назад

You're onto something that could be perfect for clubs here...

@TheTechRandom 4 года назад

I’ve always been impressed by your LED walls and even built my own take on my channel but this is insanely cool! I’ve been working on a PCB version for mine as well but it’s a little cost prohibitive right now. Maybe someday I’ll be popular enough to get big sponsorships like this

@dougsteel7414 3 года назад

It's beautiful. When the panel fell over though...Im not sure I could have handled it! I'd probably have gone for a long walk, not come back for maybe a year or two. Started a new life in a different country. Had therapy, and finally come back to fix it. Respect!

@PeaceTrainUSA-1000 4 года назад

I admire your skills, persistence, and dedication to continuous improvement.

@xxXearoXxx 4 года назад

Man merkt es sofort, wenn ein Deutscher Englisch spricht :D

@Muluffel 4 года назад

True :D

@dontworry397 4 года назад

Man merkt es echt bei allen Kanälen

@bxstiii 3 года назад

Is so!! Habe es auch direkt gemerkt

@shythevans 3 года назад

I wish I spoke german better. The best sentence I can make is an insult. :P

@bxstiii 3 года назад

@@shythevans okay... can you speak german now?

@MAYERMAKES 4 года назад

I died insinide when the unspeakable happened..also you are a genuius madman, as much as I hate RGB lighting, I love this wall project.

@rich1051414 4 года назад

This doesn't count as 'RGB lighting', this is an actual display.

@luberrdhruv 4 года назад

Ok boomer

@nutmeggaming11261 4 года назад

Question, why do you hate RGB lighting?

@nagualdesign 4 года назад

@@nutmeggaming11261 Because it's eye-wateringly garish, maybe?

@ericw.1620 4 года назад

@@nagualdesign just set it not to be? You have the freedom to do what you want with it, that's the beauty of it.

@Thuddster 5 месяцев назад

Big shout out to PCBWay, they have made multiple small runs of custom PCBs for prototype work, with mixed SMD and through-hole designs. Top-notch quality, fast turn, and at very surprising affordability. They absolutely rock!

@RaivoltG 3 года назад

I died when the panel tipped over! I was very happy when you said nothing really bad happened to any of your equipment. I can't wait to see more of your videos, great job!!

@seddie777 3 года назад

Amazing project. One of the most unique and well built things I've seen in a long time. Have you considered dividers to reduce color blending between pixels? Your ping-pong ball template printed in black to keep the aesthetic might work well and give you an even crisper image. Awesome work!

@HariWiguna 4 года назад

WOW...WOW...WOW...WOW...WOW...WOW...WOW...WOW...WOW !!! Very impressive Bitluni!

@bitlunislab 4 года назад

and you started all this ping pong thing 😄 @everyone go and watch Hari's ping pong matrix ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Otk6VTVJKBU.html

@HariWiguna 4 года назад

Thanks for the plug, Luni! You've taken ping pong LED *BEYOND* the next level! I think you need to claim your Guinness World Record!

@Fwacer 4 года назад

My soul hurt when the wall tipped over. Awesome work! The new wall looks so clean.

@NiffirgkcaJ 3 года назад

His genuine happiness when the panels worked is so contagious~

@chrisnurse6430 4 года назад

Simply amazing mate - I wonder how many of these will be appearing as part of everybody’s Christmas light show 😀

@vonvyrus 3 года назад

i find joy in your happiness with every success along the way. thank you for that.

@Iceykohnnone 3 года назад

Man, my heart broke when it crashed. Big props for getting back to it! Excellent work!

@spammyjenkins87 4 года назад

just stumbled on your channel and ended up binging on a lot of your vids, love the detail and humour. been a number of years since i messed with arduino and i was mainly using the nrf2401 back then.. it's amazing to see the features you get in boards such as the ESP32 nowadays and how cheap they are. definitely need to revisit some of my projects having watched your node red series. thanks for the vids.

@Haellsigh 4 года назад

That looks really good! Next version, hold it with magnets and contact with pogo pins?

@TecSanento 4 года назад

I guess this would me way more fragile and expensive

@NextLevelCode 3 года назад

Why not pass the signal and electricity through the magnets? 😁

@Enoch_The_Gent 3 года назад

Magnets are so expensive.

@coltonjames6653 3 года назад

If it was intended as a portable installation to be repeatedly put up and taken down for events and such, that would make sense. As a semi- permanent installation, I don't see a problem with the current connectors. The only thing I might add is some 3d printed supports to aid in alignment and relieve strain on the pins of the connectors.

@bobbeekrause179 3 года назад

I love this idea, though after working with professional LED walls for a few years, there are a few things that could make these more viable as a DIY prosumer product. If these were configured so that one "full-panel" consists of a 2x2 arrangement of the 8x8 "pong-panels", & a means of jumping power & data between the full-panels on the backside, this would be a very viable option for small traveling shows. That way the wall can travel small & more securely. Also, not a huge fan of gluing the balls directly on top of the LEDs but I see in your 3D printed attempt you made them open cavities which is better overall for both thermals, longevity of the LEDs, & light distribution. I would suggest adding one more component that you'd directly attach (screw into) to the pong-panels, some sort of socket that the open-faced pong balls could snap, click, or screw into, that way you eliminate the hot glue altogether (both during assembly & repairs). Not sure which method would be easier to fabricate though. Other than that, everything looks brilliant! ^_^

@clubpasser123454321 3 года назад

Really well done. You did a great job and the effect is excellent. I'm an LED light designer, and am really impressed with your work. Thanks for sharing!

@DIY-rf8qm 4 года назад

This pingpong wall really keeps improving. Insane!

@dualkilleryoutube5688 4 года назад

this is not something i expected to see today, aboslutly amazing! i am stunned of how good it ended up looking! Do you have any more plans for this?

@Rtcmanga_YouTube_Channel 4 года назад

wirklich erstaunlich! Good job!! :)

@GrizzlyHillman 3 года назад

Would be awesome to see an updated version using the 3D printed ping pong balls at a smaller scale to allow you to put the LEDs even closer together!

@CEFG100 2 года назад

Props to you for not only building this thing, but for having the courage to walk around bare foot on plywood

@superslammer Год назад

Anyone willing to walk around a shop with dangerous stuff around in bare feet is insane. Its no wonder the damn display tipped over. If you dont have better shop safety than that, you also don't consider other aspect like the fact that the display is heavy and should be well supported. It's just plain ignorance.

@Juha-th3go 4 года назад

2:18 That's me if new LEGO is arrived in my home XD

@AmadeusFromCH 3 года назад

Great project! You can probably avoid faulty led by setting the welding temperature lower. 400C is too much for components with plastic parts, it could also have an impact on the colors temperature.

@abboberg987 4 года назад

V1 was great V2 was fantastic Now V3 is beyond imagination. What a great job done.

@ivovass195 Год назад

Awesome project, props making it scalable and segmented. My fav was the changes to improve the framer ate. Well done

@mmpp0 4 года назад

Cool project. What would it look like with a grid seperating the lights (like the one you used for placement) everywhere on the wall and a milky while plexiglass sheet on top?

@sniffem 4 года назад

So where can I buy the PCBs / Download the files for this ? :)

@lanphanh 11 месяцев назад

Man, It's really emotional when we watch your amazing technical video!😢 Thanks for a such excellent video!

@skinnyflea2628 4 года назад

The amount of work that went into this was so so impressive. I was sad when the wall fell.

@nickwilly7 Год назад

Your design is so cool and well-made. Are your PCB designs available anywhere for this project? Like on Patreon or something? Thanks.

@gregordavies 3 года назад

Is there a link where I can find the schematic for the boards? I want to build my own :)

@Ethereial 2 года назад

I would kick some funds your way @bitluni to get schematics so I can order from @PCBWay !

@CagnPolat 3 года назад

Great work with lots of patience. All the sub parts of your esp32 works are amazing. Congratulations.

@JamieHamelSmith 4 года назад

This genuinely put a smile on my face multiple times during the video! Awesome job man. Well done!

@flos251 4 года назад

7:35 And the best is when you have hot glue on one hand and want to remove it with the other hand and burn it too 😂

@ZsomborZsombibi 4 года назад

What if the connector itself worked as switch as well?

@WoLpH 3 года назад

Not sure why RU-vid recommended this to me, but this is excellent! Really awesome project and fantastically executed!

@m3mphis_chick944 3 года назад

This channel is definitely my favorite. You make learning so much fun! Thanks for posting.

@Richardincancale 4 года назад

8:32 Looks like you want get a job making floors for Eugene -Louis Rossmann’s favourite builder!

@cystonks5374 4 года назад

😂 "DON'T INTERRUPT ME EUGENE"

@mr.budders8740 4 года назад

Imagine his face when he realizes he can buy tv's

@pbovymligsvim4182 4 года назад

But a wall

@poiiihy 3 года назад

bruh

@MichaelVroegopisvrogy 3 года назад

woooooooosh

@montrichins6040 7 месяцев назад

Not the same !

@johnnemesh5459 3 года назад

Incredible project! I can see this being pretty awesome when used as lighting in a room! The fact that you can get VIDEO running on it is even better. Only thing I would worry about is how flammable ping pong balls are...be careful! Those things are CRAZY when they catch fire!

@mesafirstkids 2 года назад

Great project. Very cool. I’ve got to say my heart broke for you when the wall came down.

@neoqueto 3 года назад

Me: Mom, can we have an 80 inch TV? Mom: We have an 80 inch TV at home. 80 inch TV at home:

@AlwaysBolttheBird 4 года назад

"the last ping pong ball. Or so I thought" Me: oh the glue probably fails on some. Drops wall Oh yeah that will do it haha. Seriously got lucky that nothing really broke

@ddcddc_ 4 года назад

And then there's me, that i can't figure out how to properly drive a 10x10 neopixel matrix... i cried when the panels fell.. i felt it in my heart. But i'm happy for the gorgeous result! Keep it up man

@AmusementLabs 3 года назад

That wall disaster hit me hard. 😵😵😵 Glad there wasn't anything broken for good. You have more patience than me. I would've just been like "forget it, I'm done"

@JustARegularGuy_SSL 4 года назад

Can u share the files so we can buy them ourselves ? I love this project

@meierthomas 3 года назад

Did you get any response? I'd love to build this as well

@djjoeray 3 года назад

Same, would love to build this

@meierthomas 3 года назад

@@djjoeray Unfortunately no response yet from @bitluni about the ability to recreate this

@Nepheos 3 года назад

check the description... it seems to have basically everything (check the github link for the software)

@JustARegularGuy_SSL 3 года назад

@@Nepheos What i didnt find so far are to PCB Layouts to upload to pcbway. Where can i find these ?

@ShifuDaxiongmao 3 года назад

So, when are you getting insane enough to make a sphere version? :P

@fenr155 Год назад

Best youtube clip I've seen in quite a long time. I need this, or rather I need this for my twin 8yr olds. Simply brilliant

@AmanBuksh 3 года назад

Your months of hard work in 21 minutes I really really respect your work Love you bro

@tyxas276 4 года назад

i tried showing this to my brother, but then he started break dancing on the floor

@CartoonMonkeyStudio Год назад

Just so you know, ping pong balls are EXTREMELY FLAMMABLE - you may want to reconsider using them in your home. Look up videos of ping pong balls on fire. NOT something to mess with!

@cheesypufs 3 года назад

Wow amazing work! I really admire your perseverance and commitment, especially after that accident!

@_dippydocus Год назад

I think I might be binge watching all of your videos this weekend 😄

@davidrubio8673 4 года назад

19:04 I´m pretty sure I didn´t clicked on a TOT video

@Harry11315 3 года назад

For awhile ive been wondering what it would be like to make a huge panel of rgbw leds, hundreds of thousands, then run fiber optic strands from each of the leds and condense them together like pixels, and line them up and glue them tightly, allowing you to make as pixel dense of a display as you want, given the diameter of the optic fibers you can source. Maybe this would be a cool project?

@Ryan-ob6gp Год назад

This sounds like a very inefficient and labor intensive way of making what would end up looking like a regular lcd screen, but with much less precisely controlled uniformity, and probably a lot of haloing around bright pixels