Most PIR Motion Sensor's have a mode where you can use the light as a standard switched light, (for which you need the switch) that is the reason for the switch in the diagram. If you just want the sensor to do on/off you can go straight from L to L on the sensor
No answer so I found a solution. I connected middle switch upper terminal directly to the Load(yellow wire). Results: ------------- It works on my PIR but it's not the same model as is shown in the video. 1. Always ON when middle switch ON. 2. Always OFF when both left & middle switches OFF. 3. Auto when left switch ON, middle switch OFF. Recommendations: ----------------------------- -You must be sure that the PIR Load output(yellow) uses an internal relay and not an internal electronic switch! -The right hand switch shown is not needed.
Pues el problemA con esa coneccion es que al apagar el apagador no funciona el sensor lo ideal es poner un apagador escalera línea una orilla y regreso de foco enmedio y regreso de sensor en la otra orilla ok así puedes encender manual y automatico
I am having one fitted in my Garage, intend using sensor when coming and going but when working in the Garage will have a switch to over ride the Sensor to allow permanent lights
@@otherdimensionss so if I understood correctly it can not work both with motion sensor and switch? If the switch is off the sensor want activate the light?
Just listened to a 15 minute vid on how to wire a motion detector ,bumbling incoherent mumbo jumbo. 15 minutes of my life i will never get back. Thanks SH EW for simplicity . paul ,founder Blokesgaragesale @fb
The red on the pir is like a switch wire when the pir senses a person this can be any colour I have too one is a red wire the other is white wire both do the same thing
Blackt Electrotech Pir Motion Sensor With Light Sensor, Energy Saving Motion Detector Switch(Wall Mounted),White www.amazon.in/dp/B00ZOZI17A/ref=cm_sw_r_cp_apa_i_r.2OBb0FZ8FJV
not very clear as how the wies connect in the switch? where do i connect the red wire going into the switch and where on the switch do i connect the wire leaving the switch? i have a comm a L1 and L2 connections on my switch so no idea where the wires connect too
Blackt Electrotech Pir Motion Sensor With Light Sensor, Energy Saving Motion Detector Switch(Wall Mounted),White www.amazon.in/dp/B00ZOZI17A/ref=cm_sw_r_cp_apa_i_YxDnBbECAYSYV