Тёмный
No video :(

PlayStation 3 Freezes and Display with Garbage 🛠️💻 - 🔧✨Troubleshooting Guide. 

idrees tech
Подписаться 8 тыс.
Просмотров 11 тыс.
50% 1

Is your PlayStation 3 freezing during gameplay or displaying distorted graphics resembling "garbage"? Don't let these frustrating issues hinder your gaming experience any longer! This comprehensive troubleshooting guide will help you understand and resolve the freezing and display problems on your PS3.
In this video, we'll guide you through a step-by-step process to diagnose and fix the freezing and garbage display issue. Whether you're a novice or an experienced gamer, you'll find valuable information and practical tips to get your PS3 back in working order.
Key topics covered in this guide:
Introduction to the Freezing and Garbage Display Issue: Understand the nature of the problem, including freezing during gameplay and distorted graphics.
Common Symptoms: Learn how to identify if your PS3 is affected by the freezing and garbage display issue.
Potential Causes: Explore the possible reasons behind the problem, such as hardware malfunctions, overheating, or software-related issues.
Safety Precautions: Get essential tips on how to handle your console and protect yourself during the troubleshooting process.
Initial Checks: Perform basic checks, such as verifying cables and connections, to rule out simple causes.
Cooling System Maintenance: Learn how to properly clean the PS3's cooling system and ensure optimal airflow to prevent overheating.
System Software Updates: Discover the importance of updating your PS3's system software and how it can potentially resolve software-related issues.
Hard Drive Examination: Understand how to check the hard drive for errors and corruption and how to perform necessary repairs or replacements.
Graphics Hardware Inspection: Learn how to diagnose and troubleshoot potential issues with the graphics hardware, such as the GPU.
Advanced Troubleshooting: Explore additional troubleshooting steps, including restoring the system to factory settings or reinstalling the operating system.
By following the troubleshooting steps outlined in this guide, you'll have a better understanding of what's causing your PS3 to freeze and display garbage-like graphics. Remember that these methods may not guarantee a permanent fix, and you should proceed with caution and at your own risk.
Don't let freezing and distorted graphics hinder your gaming enjoyment. Watch this video guide now and restore your PS3 to its optimal performance.
ps3 freeze
ps3 hdmi problem fix
ps3
ps3 freezing while playing games
ps3 slim
Enjoy!

Опубликовано:

 

5 апр 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 57   
@KurizuKurizu
@KurizuKurizu 2 года назад
Even if you wanted to send a PS3 to Sony… do they still even accept PS3’s? I imagine right now that they don’t
@zenocrosstv
@zenocrosstv 2 года назад
Hi, I've been watching a lot of ps3 repair videos and I do honestly believe that are the most skilled youtuber on PS3 repairs (you're the only one I saw repair a bricked GLOD w/o video output with impressive diagnostic precision and not just consider the board dead from the start). I've been interested in reflowing/reballing my GPU so if you could spare some time, could you please get a bit more in depth w/ your profiles for your reflow and reballing. How long do you typically run the machine for each temperature for reflow vs for reball? (I saw the numbers but I don't really understand. Is it a sequence of p1-p2-p3-p4? Or you just choose 1 of them for the process you're doing? Also want some clarification for other parameter. i.e. For 1P it's 180 for top heat and 190 for bottom heat but what do the 50 and 3.0 mean in that profile? Here's link for timestamp for faster reference ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-s-JU9CnPHX8.html
@idreestech
@idreestech 2 года назад
Dear, 50 means profile parameters long for 50 seconds and 3.0 means rise in temperature should be 3 seconds per degree.
@zenocrosstv
@zenocrosstv 2 года назад
​@@idreestech That makes sense now. Thank you for imparting your wisdom on the matter!
@NR20244
@NR20244 Год назад
I’ve turned my PS3 on for the first time in a while and the GPU has a problem. It keeps on freezing after 3 minutes and the screen changes everytime I smack the console’s top.
@idreestech
@idreestech Год назад
The GPU issue.
@rex2ducky837
@rex2ducky837 2 года назад
I like your bga machine I have a Jovy re8500 for more than 10 years great Machine.
@idreestech
@idreestech 2 года назад
Yes, of course, it is like that.
@lovelyatwal-mx3of
@lovelyatwal-mx3of Месяц назад
What's the charges for this solution you charge?
@hamishussen1589
@hamishussen1589 Год назад
If i do not have that mashine can i use heat blower to reflow sir
@idreestech
@idreestech Год назад
Check my video "cpu & gpu re-flow without bga machine.
@user-ed7nk3vh3m
@user-ed7nk3vh3m 10 месяцев назад
Im facing that problem now where areu located sir to fix my console
@idreestech
@idreestech 10 месяцев назад
Lahore Pakistan
@MilekaRobot
@MilekaRobot 2 года назад
Good video, keep going! Do you replace thermal paste between GPU and IHS cover? Someone say that must be replaced and someone it is not necessary...
@idreestech
@idreestech 2 года назад
Not at all
@RealDixonPeter
@RealDixonPeter Год назад
@@idreestech bullshyt. If you've just reflowed @ 200+ degrees what do you think happens to the thermal paste?. IT TURNS TO CHALK. I know I've reballed.. 100s of ps3s Not just reflow..
@seoseo4017
@seoseo4017 7 месяцев назад
What is the correct airflow level?Is it high, low, or medium? I can control the airflow by a percentage Meaning, I can adjust the air flow to 50%, 70%, 80%, 90%, or 100%.What is the correct percentage that I should choose for air flow so that the rsx does not burn out?I do not find a problem with the cpu at all. But the problem is with the rsx, as its RAM burns up quickly, and I find balls of tin coming out of the RAM.Although I use the same profile from your video
@idreestech
@idreestech 7 месяцев назад
While airflow is a part of the reflow process, there isn't a one-size-fits-all percentage that guarantees success. It's important to approach reflowing with caution, seek professional assistance when needed, and address the underlying causes of the solder joint issues for a more effective and lasting solution. When performing a reflow to address solder joint issues, it's crucial to follow established guidelines and best practices. While airflow is important for dissipating heat during the reflow process, there isn't a universal percentage that applies in all cases. The key is to ensure a consistent and controlled heat distribution across the RSX chip.
@matija396
@matija396 4 месяца назад
What did you put under the gpu?
@idreestech
@idreestech 4 месяца назад
First I cleaned the GPU thoroughly with alcohol from the bottom, then I used flux paste on it before the reflow process, since the flux paste is hard, I melted it with a heat gun. It has been delivered underneath the GPU chip.
@cuongtran-wc8rz
@cuongtran-wc8rz Год назад
I often explode the ram on rcx, do you know the reason, thanks
@idreestech
@idreestech Год назад
That is due to a stress in temperature dear.
@cuongtran-wc8rz
@cuongtran-wc8rz Год назад
@@idreestech I set the temperature above 240c below 280c heat plate 330c wind 90,thank
@The.love1
@The.love1 2 года назад
very nice video brother plz continue , but the reflow wont last that long is that right ? i think re ball is the correct way
@idreestech
@idreestech 2 года назад
In my experience in Ps3, it works for long but PS4 must have to re-ball it.
@tekkenlover8645
@tekkenlover8645 Год назад
Same problem do you fix my ps3?
@NewbFixer
@NewbFixer 2 года назад
The music is loud compared to your voice. I think what you have to say is more important than the music. Thank you.
@idreestech
@idreestech 2 года назад
Sorry for that. I will be careful about it. Thanks indeed!
@noctsickversus9632
@noctsickversus9632 3 месяца назад
You're the PRO. May I will seek you for help in future for my ps3 super slim. For now I have a question. Can it be that seeing the graphics more yellow in particular when there is black immages from one day to another could be related to a bug? Cause I didn't play for some months and now look more yellowish. Can be dust on tv display?
@idreestech
@idreestech 3 месяца назад
Is it a CRT display device? If yes then it needs to be balanced by adjusting the colour gain controls. If no and display device is a led then it could be the dust particles but additionally it causes the display blurry.
@noctsickversus9632
@noctsickversus9632 3 месяца назад
@@idreestech it's a metz tv full hd of kinda 2018 maybe 19
@noctsickversus9632
@noctsickversus9632 3 месяца назад
@@idreestech I cleaned the display but prolly the problem was another. Game mode settings about image, in tv options. Those game mode settings really deteriorate graphics.
@noctsickversus9632
@noctsickversus9632 3 месяца назад
@@idreestech also do you play something online on ps3? I 'm playin raging blast 2 but I have also tekken tag 2 , naruto storm revolutions, ac revelations (online WORKS, at least a year ago worked) . Also mortak kombat , split second , saint seiya and more like RE revelations 2
@noctsickversus9632
@noctsickversus9632 3 месяца назад
@@idreestech anyway. My greetings man. Thank you.
@yolkyhorizon
@yolkyhorizon Год назад
For me it only does a simmilar thing only on ratchet and clank tools of destruction but only at like the bottom right very little BUT anything else is fine
@Waleed-abdullah
@Waleed-abdullah 2 месяца назад
Mine is like unfortunately
@idreestech
@idreestech 2 месяца назад
God is Great 👍🏼
@wigmansir
@wigmansir 2 года назад
Thank you uncle for another great video, how long will the reflow last? I've heard that reflowing or reballing the APU, but in this case the GPU don't last long. Is that true.
@idreestech
@idreestech 2 года назад
In my experience in Ps3, it works for long but PS4 must have to re-ball it.
@1ahmad1zdar
@1ahmad1zdar Год назад
Hi, im from multan, my ps3 fat has the same gpu garbage and smacking ps3 changes the screen garbage. Can i have your number or you can fix it for me? I tried to heat gpu with hair dryer the garbage is gone but ps3 freezes in game sometimes
@idreestech
@idreestech Год назад
It can be fixed. Please send it to me and refer to the channel description for details.
@1ahmad1zdar
@1ahmad1zdar Год назад
@@idreestech okay let me check details on the channel description
@supercomputing942
@supercomputing942 2 года назад
Very nice repair
@idreestech
@idreestech 2 года назад
Thanks 👍
@netten2057
@netten2057 2 года назад
first :,) !!!! * thanks a lot for the video
@idreestech
@idreestech 2 года назад
Thank you too!
@piyushgamesoftwarerewa7793
@piyushgamesoftwarerewa7793 2 года назад
Hello sir Ps3 ke 2500 series ke board me gpu sort ho gaya hai Ab mere pass ek 3000 series ka board hai jiska gup ok hai . To mai iska gup nikal kar 2500 series me laga do to kya wah work karega. Please help me.
@idreestech
@idreestech 2 года назад
Chip No. must be the same.
@hotwheelscollector1997
@hotwheelscollector1997 4 месяца назад
I don't know why this happens my PS3 Slim is super clean and has a brand new hard drive
@idreestech
@idreestech 2 месяца назад
🥹
@hotwheelscollector1997
@hotwheelscollector1997 2 месяца назад
@@idreestech What do you mean?
@mohandmohand2047
@mohandmohand2047 2 года назад
It is reflow... 👀
@skdevskdev2843
@skdevskdev2843 2 года назад
Thanks for the great videos but please stop adding music. It makes it really hard to hear you speak.
@idreestech
@idreestech 2 года назад
Sorry about that
@hasithadithya833
@hasithadithya833 2 года назад
Can u make a tutorial how to replace the Wifi chip on a ps4
@idreestech
@idreestech 2 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3TzlsWQRrVA.html
@tirurmusthafa
@tirurmusthafa 2 года назад
hai
Далее
女孩妒忌小丑女? #小丑#shorts
00:34
Просмотров 11 млн
❌Ему повезло больше всех #story
00:41
PS3 Freezing, Lockups, How To Fix Recovery Menu
9:12
Просмотров 473 тыс.
Infested PS3 Slim No Audio/Video | Can I Fix It?
9:11
PS3 RSX GPU reballing from begin to end
41:42
Просмотров 2,2 млн
女孩妒忌小丑女? #小丑#shorts
00:34
Просмотров 11 млн